電子電器產品家用或辦公設備檢測

電子電器產品家用或辦公設備檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 6565-2015職業分類與代碼

本標準規定了我國職業的分類結構、類別、代碼及說明。本標準適用于按職業分類的各種普查、調查統計及行政管理和國內外信息交流等。

GB/T 23685-2009廢電器電子產品回收利用通用技術要求

本標準規定了廢電器電子產品在收集、運輸、貯存、處理和處置過程的資源有效利用和污染控制的技術要求和相關規定。本標準適用于下列廢電器電子產品：辦公設備及計算機產品、通信設備、視聽產品及廣播電視設備、家用及類似用途電器產品、儀器儀表及測量監控產品、電動工具及電線電纜共七大類，并包括構成這些產品的所有零部件、元器件及材料(見附錄A)。其他產品可參照執行。本標準不適用于電池、照明器具及醫療電子電器設備等產品。

GB/T 28841-2012家用電子電器維修業服務經營規范

本標準規定了家用電子電器維修業服務經營的范圍、方式和方法，服務經營各方間的職責關系，經營服務的和技術保障資源條件（設施、設備、器材、技術支持、職業人員等），服務經營組織、經營者和從業人員的基本/有關行為，以及服務的質量控制和測評方法。本標準適用于從事家用電子電器維修服務的各種經營組織、經營者和從業人員有關服務和管理的活動。

HJ 527-2010廢棄電器電子產品處理污染控制技術規范

本標準規定了廢棄電器電子產品在收集、運輸、貯存、拆解和處理過程中的污染控制技術要求。本標準適用于廢棄電器電子產品在收集、運輸、貯存、拆解和處理過程中的污染控制管理。本標準適用于廢棄電器電子產品拆解和處理等建設項目環境影響評價、環境保護設施設計、竣工環境保護驗收及投產后的運營管理。本標準不適用于廢棄電池及照明器具等產品的拆解和處理污染控制管理。

BS EN 50564-2011家用和辦公電氣電子設備.低功耗的測量

This European Standard specifies methods of measurement of electrical power consumptionand the reporting of the results for a range of electrical and electronic household and officeequipment, hereafter referred to as products.This standard? addresses issues associated with measuring electrical power, in particular low power (inthe order of a few Watts or less), consumed by mains powered products,? describes in detail the requirements for testing single phase products with a rated inputvoltage in the range of 100 V a.c. to 250 V a.c. but it may, with some adaptations, also beused with three phase products,? may also be of assistance in determining the energy efficiency of products in conjunctionwith other, more specific, product standards.The value of energy consumed will depend on the operating mode of the product under test,for instance whether the equipment is in an off mode, in a standby mode or in an activemode. This standard does not specify these modes and so it is not possible to use thisstandard on its own. Instead, it provides a method of measurement with a variety of modeswhich are defined elsewhere.This standard does not? specify safety requirements,? specify minimum performance requirements,? set maximum limits on power or energy consumption,? contain limit values or procedures for verifying compliance with regulatory requirements.