抑制電磁干擾用無源濾波裝置檢測

抑制電磁干擾用無源濾波裝置檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 10250-2007船舶電氣與電子設備的電磁兼容性

本標準規定了船舶電氣與電子設備的發射、抗擾度和性能準則的電磁兼容性(EMC)的低要求，有助于滿足海事組織(以下簡稱IMO)A．813決議的要求(參見附錄A)。 依據本標準進行試驗和安裝的設備滿足相關的IM0要求。 注1：本標準的規范性內容已作為EMC系列標準中的一個標準。 注2：本標準未涉及對人員的影響。 本標準針對測量方法給出了進一步的指南和建議，來實現下列各組設備中的電氣與電子裝置的電磁兼容性。 A組：無線電通信和導航設備 B組：發電和變電設備 C組：以脈動能量工作的設備 D組：開關設備和控制系統 E組：內部通信和信號處理設備 F組：非電氣零件和設備 G組：綜合系統 IEC 60945是A組和C組的基礎EMC標準。 注：本標準沒有具體說明諸如對電擊和設備介電(強度)試驗時保護的非安全操作和基本安全要求。

GB/T 50789-2012±800kV直流換流站設計規范

本規范適用于±800kV兩端直流輸電系統換流站工程的設計。

GB/T 51200-2016高壓直流換流站設計規范

本規范適用于±660kV及以下每極采用一個12脈動閥組接線的兩端高壓直流輸電系統換流站和背靠背換流站工程的設計。

GB 51204-2016建筑電氣工程電磁兼容技術規范

本規范適用于新建、擴建和改建的民用建筑和一般工業建筑的電氣工程電磁兼容的設計、施工、檢測及驗收。

JGJ 243-2011交通建筑電氣設計規范

本規范適用于新建、擴建、改建的以客運為主的民用機場航站樓、交通樞紐站、鐵路旅客車站、城市軌道交通站、磁浮列車站、港口客運站、汽車客運站等交通建筑電氣設計，不適用于飛機庫、油庫、機車站、行業專用貨運站、汽車加油站等的電氣設計。

JGJ 310-2013教育建筑電氣設計規范

本規范適用于新建、擴建和改建的各級各類學校校園電氣總體設計及供教學活動所使用建筑物的電氣設計。

DL/T 1194-2012電能質量術語

本標準規定了與電能質量有關的基本名詞、術語及定義。本標準適用于電力行業電能質量技術和管理的有關領域。

IEC 60939-1-2010抑制電磁干擾用無源濾波裝置.第1部分:通用規范

This generic specification relates to passive filter units for electromagnetic interference suppressionfor use within, or associated with, electronic or electrical equipment and machines.Both single and multi-channel filters within one enclosure are included within the scope of thisgeneric specification.Filters constructed of capacitive elements where the inductance is inherent in the constructionof the filter are within the scope of this specification. Similarly, filters constructed of inductiveelements where the capacitance is inherent in the construction of the filter are also within thescope of this generic specification. The manufacturer should state whether a given componentis to be designed as a capacitor, an inductor or a filter.The filter units within the scope of this generic specification are further distinguished as thosefor which safety tests are appropriate (e.g. those connected to mains supplies) and those forwhich such tests are not appropriate. A separate sectional specification covers the passivefilter units for which safety tests are appropriate.This generic specification establishes standard terms, inspection procedures and methods oftest for use in sectional and detail specifications within the IECQ-CECC system for electroniccomponents.

IEC 60939-2-1-2004抑制無線電干擾用整套濾波裝置.第2-1部分:空白詳細規范.抑制電磁干擾用無源過濾裝置.安全試驗所需的過濾器(評定等級D/DZ)

Is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The use of IEC 60939-2-2 may be more appropriate for components where approval and requalification tests contribute considerably to the cost of the product, whereas the employment of this specification may be necessary for components manufactured in mass production. This specification offers the assessment levels D and DZ (Zero defect).

IEC 60939-2-2-2004抑制無線電干擾用整套濾波裝置.第2-2部分:空白詳細規范.抑制電磁干擾用無源過濾裝置.安全試驗所需的過濾器(僅用于安全試驗)

Forms the basis for a uniform procedure for a common Safety Mark. It implements the approval schedule for the safety test described in IEC 60939-2, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

IEC 60939-2-2005抑制電磁干擾用無源濾波裝置.第2部分:分規范:安全試驗恰當的無源濾波裝置.試驗方法和一般要求

Applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required.

IEC 60939-2 CORR 1-2005抑制電磁干擾用無源濾波裝置.第2部分:分規范.適用于安全試驗的無源濾波裝置.試驗方法和一般要求.勘誤1

This standard is Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements; Corrigendum 1

GSO IEC 60939-1-2015電磁干擾抑制用無源濾波裝置.第1部分：總規范

This generic specification relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. Filters constructed of capacitive elements where the inductance is inherent in the construction of the filter are within the scope of this specification. Similarly, filters constructed of inductive elements where the capacitance is inherent in the construction of the filter are also within the scope of this generic specification. The manufacturer should state whether a given component is to be designed as a capacitor, an inductor or a filter. The filter units within the scope of this generic specification are further distinguished as those for which safety tests are appropriate (e.g. those connected to mains supplies) and those for which such tests are not appropriate. A separate sectional specification covers the passive filter units for which safety tests are appropriate. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components.

GSO IEC 60939-2-2-2014無線電干擾抑制用完整濾波裝置.第2-2部分：空白詳細規范.電磁干擾抑制用無源濾波裝置.要求進行安全試驗的濾波器（僅限安全試驗）

IEC 60939-2-2:2004 forms the basis for a uniform procedure for a common Safety Mark. It implements the approval schedule for the safety test described in IEC 60939-2, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

GSO IEC 60939-2-2014電磁干擾抑制用無源濾波裝置第2部分：分規范適用于安全試驗的無源濾波裝置試驗方法和一般要求

This Sectional specification applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. This Sectional specification applies to passive filter units which will be connected to an a.c. mains or other supply with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 000 V d.c.