聽力設備檢測

聽力設備檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 7341.1-2010電聲學 測聽設備 第 1 部分：純音聽力計

本標準規定了聽力計的通用要求，以及采用心理聲學的測試方法，通過與標準參考聽閾級的比較來設計的，用測定聽閾級的純音聽力計的具體要求。本部分的目的旨在保證：用符合本部分要求的不同聽力計，按照GB/T 16403及GB/T 7583所描述的方法，對指定人耳在125Hz～8kHz的頻率范圍內作聽力測試，尤其是聽閾測試，應能得到基本相同的結果；所得結果表示受試耳的聽力與基準聽閾之間的有效比較；聽力計按其產生的測試信號范圍，操作方式或測試的聽覺功能范圍的復雜性進行分類。

IEC 60455-3-4-2003電氣絕緣用樹脂基復合物.第3部分:單項材料規范.活頁4:加填料的聚氨酯復合物

Gives the requirements for filled polyurethane resinous compounds in the cured form for classes PUR-F-4 to PUR-F-8.

IEC 63087-1-2021主動輔助生活用輔助聽力設備和系統.第1部分：總則

This part of IEC 63087 specifies requirements, and the associated methods of measurement, for the electroacoustic performance of personal listening systems. This document specifies requirements for the provision of assistive listening in audio, video and multimedia systems and equipment. The requirements are of different kinds, because of the diversity of the hardware concerned. Existing IEC standards for methods of measurement are normatively referenced if they exist. Methods of measurement and performance requirements are specified in IEC 63087-21. This document does not apply to hearing aids. Also excluded are devices entirely worn on or in the ear, which cannot be measured independently.

ISO 389-1-2017聲學 校正聽力設備的基準零級 第1部分:純音和壓耳式耳機用的基準等效閾聲壓級

This document specifies a standard reference zero for the scale of hearing threshold level applicable to pure-tone air conduction audiometers, to promote agreement and uniformity in the expression of hearing threshold level measurements throughout the world. It states the information in a form suitable for direct application to the calibration of audiometers, that is, in terms of the reference equivalent threshold sound pressure levels of generic supra-aural earphones specified in 4.2, measured on an ear simulator complying with IEC 60318-1 and in terms of modelspecific data given in two additional tables for the IEC 60318-3 acoustic coupler and the IEC 60318-1 ear simulator, respectively. The data are based on an assessment of the information available from the various standardizing laboratories responsible for audiometric standards and from scientific publications. Some notes on the application and derivation of the reference levels are given in Annexes A and B.

ISO 389-2-1994聲學 校正聽力設備的基準零級 第2部分:純音和插入式耳機用的基準等效閾聲壓級

Specifies levels supplementary to those specified in ISO 389:1991 (to be re-issued as ISO 389-1). Values given are applicable to insert earphones of type Etymotic Research ER-3A, coupled to the human ear by ear inserts of type ER-3-14.

ISO 389-3-2016聲學. 聽力測定設備校準用標準零級. 第3部分: 純音和骨振動器的標準等效閾值振動力水平

This part of ISO 389 specifies the following data applicable tonthe calibration of bone vibrators for puretone bone-conductionnaudiometry:na) reference equivalent threshold vibratory force levelsn(RETVFL), corresponding to the threshold of hearing of youngnotologically normal persons by bone-conduction audiometry;nb) essential characteristics of the bone vibrator and the methodnof coupling to the test subject, and to the mechanical coupler;nc) essential characteristics of the masking noise and thenbaseline masking noise level applied to the ear not under test.nGuidance on the practical application of this part of ISO 389 innthe calibration of audiometers is given in Annex B.nRETVFL is the vibratory force level transmitted to a mechanicalncoupler of specified characteristics by a vibrator when applied tonthe mechanical coupler under stated conditions of test and whennenergized at the voltage level corresponding to the normalnthreshold of hearing for location on the mastoid prominence.nN

ISO 389-4-1994聲學 校正聽力設備的基準零級 第4部分:窄帶掩蔽噪聲基準級

Specifies reference levels for narrow-band masking noise presented by air conduction from an earphone in pure-tone audiometry. The data are given in terms of levels to be added to the reference equivalent threshold sound pressure levels for the corresponding pure-tone frequencies. Data are given for noise bandwidths of one-third and one-half octaves.

ISO 389-5-2006聲學.測聽設備的校準用參考零點.第5部分:頻率范圍:8kHz～16kHz的純音用參考等效值閾聲壓級

This part of ISO 389 specifies reference equivalent threshold sound pressure levels (RETSPLs) of pure tonesin the frequency range from 8 kHz to 16 kHz applicable to the calibration of air conduction audiometers forspecific earphones.NOTE Some notes and references on the derivation and the test conditions used to determine the reference levelsare given in Annex A and the Bibliography.

ISO 389-6-2007聲學.聽力測量設備校準用參考零點.第6部分:短時持續聽覺試驗信號參考擴音閥

This part of ISO 389 specifies reference hearing threshold levels for tests signals of short duration applicable to the calibration of audiometric equipment where such signals are used.

ISO 389-8-2004聲學.校正聽力設備的基準零級.第8部分:耳罩式耳機純音基準等效閾聲壓級

本部分規定了125 Hz～8 000 H2頻率范圍的純音基準等效閾聲壓級(RETSPLs)，適用于配備了 一種特殊型號的耳罩式耳機(SENNHEISER HDA 200)的氣導測聽設備的校準。 注：在附錄A和參考文獻中給出了得出HDA 200型耳罩式耳機基準等效閾聲壓級的說明和測試條件。 附錄B給出了這種耳罩式耳機的聲衰減。附錄C給出了A—E類和B—E類語言聽力計(見 GB／T 7341．2)耳機的自由場等效輸出修正值。

ISO 389-9-2009聲學.校準測聽設備的基準零級.第9部分:基準聽力閾級測定的首選試驗條件

This part of ISO 389 specifies test conditions for determiningnthe hearing thresholds of subjects for the purpose of establishingnstandardized values for reference hearing threshold levels.

ITU-R BR.785-1 SPANISH-2001在多媒體發布環境中發布節目

The ITU Radiocommunication Assembly, considering that television programmes can be produced for release on a variety of media;that end-user television installations can desirably be conceived to use programmes delivered through a variety of media; that the same concept applies to audio programmes and audio end-user installations; that there is a need to ensure harmonization of standards between programme generation and programme presentation; that the terms of the ITU-R cooperation with the IEC and the IS0 are described in Opinion 16 and Resolution ITU-R 41.

ITU-R REPORT M.2014-1-2006用于調度業務的地面數字移動系統

Demand in the land mobile service is on the increase due to annual growth as well as to new data-based service requirements. This has led to the development of more spectrally efficient technologies utilizing digital modulation and in many cases trunking. These technologies are being introduced in systems worldwide to accommodate this demand.

EN ISO 389-2-1996聲學.校正聽力設備的基準零級.第2部分:純音和插入式耳機用的基準等效閾聲壓級 ISO 389-2-1994

This part of ISO 389 specifies reference equivalent threshold sound pressure levels (RETSPL) forThe calibration of pure-tone audiometers supplementary to those specified in ISO 389:1991, Values given inThis part of ISO 389 are applicable to insert earphones of a pattern specified in clause 4

EN ISO 389-3-2016聲學.聽力設備校正用基準零級.第3部分:骨振器純聲基準等效閾力級(ISO 389-3:2016)

Dieser Teil von ISO 389 legt die folgenden, für die Kalibrierung von Knochenleitungsh?rern in der Reinton-Knochenleitungs-Audiometrie anwendbaren Daten fest: a) ?quivalente Bezugs-Schwellenkraftpegel (RETVFL), die den durch Knochenleitungs-Audiometrie bestimmten H?rschwellenpegeln von jungen, otologisch normalen Personen entsprechen; b) Wesentliche Eigenschaften des Knochenleitungsh?rers sowie die Methode zur Ankopplung an den Probanden und an den mechanischen Kuppler; c) Wesentliche Eigenschaften und der Grundpegel des Verdeckungsger?uschs, mit dem das nicht geprüfte Ohr beschallt wird. Anleitung zur praktische Anwendung dieses Teils von ISO 389 bei der Kalibrierung von Audiometer ist im Anhang B enthalten. Der Bezugs-Schwellenpegel der periodischen Kraft ist der vibratorische Wert der Kraft auf einen mechanischen Kuppler mit festgelegten Eigenschaften, die über einen Vibrator, wenn ein mechanischen Kuppler mit festgelegten Prüfbedingungen verwendet wird, auf diesen wirkt und dieser mit einer Spannung, die den üblichen H?rschwellen für die Stelle entspricht, betrieben, am vorstehenden Teil des Mastoids angewendet wird. ANMERKUNG 1 Werte für die Unterschiede zwischen den ?quivalenten Bezugs-Schwellenkraftpegeln bei Stirnankopplung und bei Mastoidankopplung sind zur Information in Anhang C angegeben. ANMERKUNG 2 Empfohlene Verfahren zur Durchführung der Knochenleitungs-Audiometrie sind in ISO 8253-1 beschrieben.

EN ISO 389-4-1998聲學.校正聽力設備的基準零級.第4部分:窄帶掩蔽噪聲基準級［代替:CEN EN 28798］

This part of ISO 389 specifies reference levels fornarrow-band masking noise presented by air con-duction from an earphone in pure-tone audiometry.The data are given in terms of levels to be added tothe reference equivalent threshold sound pressurelevels forThe corresponding pure-tone frequencies asspecified in ISO 389:1991 or ISO 389-2, respectively,whenThe masking earphone is placed onThe appro-priate acoustic coupler, ear simulator or artificial ear.Data are given for noise bandwidths of one-third andone-half octaves.NOTE 1 Some notes onThe derivation of the referencelevels are given in annex A.

EN ISO 389-6-2007聲學.校正聽力設備的基準零級.第6部分:短時持續聽覺試驗信號參考擴音閥

This part of ISO 389 specifies reference hearing threshold levels for tests signals of short duration applicable to the calibration of audiomentric equipment where such signals are used.