ASTM B698-2002無縫銅和銅合金管和管道的標準分類

This classification is provided to serve the needs of designers, specifiers, installers, and users of seamless copper and copper alloy plumbing tube and piping systems. It familiarizes them with the products available for such systems, giving size ranges and available materials for products listed herein. Also refer to Section 1.1.1 This classification covers various types of seamless copper and copper alloy pipe and tube used for water service, distribution, and drainage. It is not a specification for the various types and alloys.1.2 This classification uses the standard copper designations developed and used by the copper industry.1.3 This classification makes no attempt to differentiate between all compositions that could be termed coppers or copper alloys, but, in conformance with general practice in the trade includes those coppers and copper alloys commonly used in the manufacture of water service, distribution, and drainage pipe and tube.1.4 This classification makes no attempt to differentiate between all applications of seamless copper and copper alloy piping and tubing, and is intended for use in water service distribution and drainage.

ASTM B698-2010無縫銅和銅合金管和管道的標準分類

This classification is provided to serve the needs of designers, specifiers, installers, and users of seamless copper and copper alloy plumbing tube and piping systems. It familiarizes them with the products available for such systems, giving size ranges and available materials for products listed herein. Also refer to Section 1.1.1 This classification covers various types of seamless copper and copper alloy pipe and tube used for water service, distribution, and drainage. It is not a specification for the various types and alloys. 1.2 This classification uses the standard copper designations developed and used by the copper industry. 1.3 This classification makes no attempt to differentiate between all compositions that could be termed coppers or copper alloys, but, in conformance with general practice in the trade includes those coppers and copper alloys commonly used in the manufacture of water service, distribution, and drainage pipe and tube. 1.4 This classification makes no attempt to differentiate between all applications of seamless copper and copper alloy piping and tube intended for use in water service distribution and drainage.

ASTM B698/B698M-2010(2016)e1銅和銅合金無縫管和管件的標準分類

4.1x00a0;This classification is provided to serve the needs of designers, specifiers, installers, and users of seamless copper and copper alloy plumbing tube and piping systems. It familiarizes them with the products available for such systems, giving size ranges and available materials for products listed herein. Also refer to Section 1. 1.1x00a0;This classification covers various types of seamless copper and copper alloy2 pipe and tube used for water service, distribution, and drainage. It is not a specification for the various types and alloys. 1.2x00a0;This classification uses the standard copper designations developed and used by the copper industry. 1.3x00a0;This classification makes no attempt to differentiate between all compositions that could be termed coppers or copper alloys, but, in conformance with general practice in the trade, includes those coppers and copper alloys commonly used in the manufacture of water service, distribution, and drainage pipe and tube. 1.4x00a0;This classification makes no attempt to differentiate between all applications of seamless copper and copper alloy piping and tube intended for use in water service distribution and drainage. 1.5x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

ASTM B828-2002用銅、銅合金管和配件釬焊制作毛細管接縫的標準實施規程

The techniques described herein are used to produce leak-tight soldered joints between copper and copper alloy tube and fittings, either in shop operations or in the field. Skill and knowledge on the part of the operator or mechanic are required to obtain a satisfactorily soldered joint. 1.1 This practice describes a procedure for making capillary joints by soldering of copper and copper alloy tube and fittings. 1.2 This procedure is applicable to pressurized systems such as plumbing, heating, air conditioning, refrigeration, mechanical, fire sprinkler, and other similar systems. ASME B31.5 and B31.9 reference the techniques used for satisfactory joint preparation. It is also used in the assembly of nonpressurized systems such as drainage, waste, and vent. 1.3 It is not applicable to the assembly of electrical or electronic systems. 1.4 Tube and fittings are manufactured within certain tolerances to provide for the small variations in dimensions associated with manufacturing practice. Applicable specifications are listed in Appendix X1. 1.5 A variety of solders are available that will produce sound, leak-tight joints. Choice of solder will depend upon the type of application and on local codes. For potable water systems, only lead-free solders shall be used, some of which are described in Specification B 32. 1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information purposes only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For hazard statements, see the warning statements in 6.4.1, 6.6.1, and 6.6.3.