安全性衣服的高可見度材料檢測

安全性衣服的高可見度材料檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 15732-1995漢字鍵盤輸入用通用詞語集

本標準規定了漢字鍵盤輸入用通用詞語。 本標準適用于漢字鍵盤輸入、方案優化和評測。中文信息處理的其他領域也可參照?qǐng)?zhí)行。

HB 6784-1993飛機內部和外部照明

本規范規定了飛機內部和外部照明的總體布局、性能、檢驗方式和檢驗要求。\n　　本規范適用于各種軍、民用飛機、也適用于直升機。

CCAR-23-R3-2004正常類、實用類、特技類和通勤類飛機適航規定

（a）本部規定頒和更改正常類、實用類、物質類和通勤類飛機型號合格證的適航標準。（b）按照中國民用航空規章第21部的規定申請正常類、實用類、物質類和通勤類飛機型號合格證或申請對核合格證進行更改的法人，必須表明符合本部中適用的要求。

EN 15333-1-2008呼吸裝置.壓縮氣體驅動裝置用開路臍帶式電纜.第1部分:需氧量供應裝置

This European Standard specifies minimum requirements for demand surface supplied and demand surface oriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to the following: depths between 0 m and 50 m for apparatus using air, oxygen or oxygen in nitrogen mixtures; depths between 0 m and 60 m for apparatus using oxygen, oxygen and helium or oxygen, nitrogen and helium gas mixtures; water temperatures between 4 ℃ and 34 ℃ or outside these temperatures as specified by the manufacturer. The requirements of this European Standard are intended to take account of the interaction between the wearer, the apparatus, and where possible the environment in which the apparatus is likely to be used.This European Standard does not cover saturation diving systems, mini bell systems or apparatus used for oxygen decompression only.

DIN CEN/TR 614-3-2011機械安全性.第3部分:移動機械的設計用人類工效學原則.德文版本 CEN/TR 614-3-2010

This Technical Report establishes the ergonomic principles to be followed during the design process of mobile machinery with special emphasis on the aspects in which mobile machinery differs from static machinery. The ergonomic design principles given in this Technical Report apply to either or both seated and standing positions. This Technical Report is applicable for the design of mobile (self-propelled and towable) machines in order to ensure the ergonomic requirements for the operator. This Technical Report applies only to driving and operating mobile machinery and not to performing other tasks (e. g. sorters on a potato harvesting machine). Pedestrian controlled and handheld machinery are not included. This Technical Report also applies to vehicle-mounted machinery when observing their functional properties e. g. mobile cranes. Installing, cleaning, and repairing of mobile machinery is not included. Basic concepts and general ergonomic principles for the design of machinery are dealt with in prEN ISO 12100 and EN 614-1 and EN 614-2.

DIN CEN/TR 16149-2011起草CEN/TC 158標準的指導文件;德文版本CEN/TR 16149-2011

This document has been produced by the convenors of CEN/TC158 working groups. It is intended to serve as a guide, to be consulted when drafting new EN standards for head protection and when revising or amending existing ones. Whilst implementation of its contents is not mandatory, working groups are urged not to make deviations from this guidance document without good cause. This is a living document - omissions will be covered in later issues. In this document, reference is made to CEN/TR 16148, Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees. This gives further guidance about the areas of the head which helmet standards should aim to protect, and about head and neck injuries. The working group should assess the foreseeable risks against which the helmet should provide protection. Each of the helmet standards should provide for a helmet, which will offer optimum protection to the head against these foreseeable risks and should satisfy the Basic Health and Safety Requirements of EU Directive 89/686/EEC to the extent indicated in Annex ZA of the helmet standard. Helmet standards should indicate, in an informative annex, how the level of performance requirements specified relates to the severity of injury to be tolerated. Working groups should refer to CEN/TR 16148 when drafting this annex. Reference is also made to EN 13087 (all parts), Protective helmets - Test methods. This standard provides harmonized methods of test for many of the topics listed below. The various parts of EN 13087 are listed in the Bibliography.

DIN EN ISO 12100-2011機械安全性.設計一般原則.風險評估和風險降低(ISO 12100-2010).德文版本EN ISO 12100-2010

This International Standard defines the basic terminology and specifies the methodology and principles for risk assessment and risk reduction to help designers in achieving safety in the design of machinery.

BS 6465-4-2010衛生器具.公共廁所業務守則條款

This part of BS 6465 gives recommendations on the location, numbers,siting, design and management of public toilets. It is applicable to theprovision of new facilities and to the retention and refurbishment ofexisting facilities.This standard is applicable to the following types of public toilet facilities:a) municipal public on-street toilets;b) off-street publicly available toilets (e.g. in shopping malls);c) automatic public conveniences (APCs);d) street urinals;e) facilities for disabled people, from the point of view of scale ofprovision and location;f) baby changing and ancillary toilet facilities.

BS 7121-4-2010起重機安全使用實施規程.卡車式裝載機

This part of BS 7121 gives recommendations for the safe use of lorryloaders. Subjects covered include management, selection of equipment,selection and training of personnel, procedures and precautions,testing, inspection, maintenance and examination.This part of BS 7121 is intended to be used in conjunction withBS 7121-2, which provides general guidance on the inspection, testingand examination of all types of cranes.

BS EN 14175-2-2003通風櫥.安全性和性能要求

This part 2 of EN 14175 specifies safety and performance requirements and objectives for general purpose fume cupboards. In addition, dimensions and marking of general purpose fume cupboards are specified as well as requirements on the product manual to be supplied with fume cupboards.\nRecommendations on the evaluation of conformity of general purpose fume cupboards with the requirements of this part 2 of EN 14175 are given in the informative annex A.\nFor terms and definitions of fume cupboards EN 14175-1 applies. For type testing of fume cupboards prEN 14175-3 applies. For microbiological safety cabinets EN 12469 applies.\nThis part of EN 14175 does not address recirculatory filtration fume cupboards or fume cupboards for carrying out work on radioactive materials. For special purpose fume cupboards other requirements may apply.

BS EN 15333-1-2008呼吸設備.配備的開路臍帶式壓縮氣體驅動裝置.生物需氧量便攜式供氧裝置

This European Standard specifies minimum requirements for demand surface supplied and demand surfaceoriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to thefollowing:? depths between 0 m and 50 m for apparatus using air, oxygen or oxygen in nitrogen mixtures;? depths between 0 m and 60 m for apparatus using oxygen, oxygen and helium or oxygen, nitrogen andhelium gas mixtures;? water temperatures between 4 °C and 34 °C or outside these temperatures as specified by themanufacturer.The requirements of this European Standard are intended to take account of the interaction between thewearer, the apparatus, and where possible the environment in which the apparatus is likely to be used.This European Standard does not cover saturation diving systems, mini bell systems or apparatus used foroxygen decompression only.

BS EN 15333-2-2009呼吸設備 配備的開路臍帶式壓縮氣體驅動裝置 自由流動裝置

This European Standard specifies minimum requirements for free flow surface supplied and free flow surfaceoriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to thefollowing:?-a maximum depth of 50 m for apparatus using:a) air or;b) oxygen or;c) oxygen in nitrogen mixtures (Nitrox) or;d) oxygen in helium mixtures (Heliox) or;e) oxygen, nitrogen and helium mixtures (Trimix);?-water temperatures between 4 °C and 34 °C or outside these temperatures as specified by themanufacturer;?-environmental temperatures between -20 °C and 50 °C or outside these temperatures as specified by themanufacturer.The requirements of this European Standard are intended to take account of the interaction between thewearer, the apparatus, and where possible the environment in which the apparatus is likely to be used.This European Standard does not cover saturation diving systems, mini bell systems or apparatus used foroxygen decompression only.

ANSI B71.3-2005室外動力設備.掃雪機.安全規范

The safety specifications in this standard apply to (a) walk-behind power snow throwers, (b) ride-on power snow throwers, (c) lawn ride-on tractors with snow thrower attachments, (d) lawn and garden tractors with snow thrower attachments, and (e) lever-s