電飯煲 電壓力煲檢測

電飯煲 電壓力煲檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 32928-2016電子商務交易產品信息描述 家用電器

本標準規定了電子商務交易中家用電器類產品信息的描述屬性與方法、模型、摘要描述以及擴展方法。本標準適用于電子商務中家用電器類產品信息的發布、交換、存儲和管理等。

GB/T 35722.2-2017家用和類似用途智能電自動控制器系統 電磁爐用智能電自動控制器系統的特殊要求

GB/T 35722的本部分規定了各類家用和類似用途電磁爐，包括所有IH加熱電器之間及其關聯系統間的分類、系統架構、入網、標識、接口、安全及通用設備模型。本部分適用于單相器具額定電壓不超過250 V，其他器具額定電壓不超過480 V的各類家用和類似用途電磁爐及采用IH加熱技術作為加熱源的加熱產品內的智能控制器系統。

QB/T 4687-2014電磁灶可靠性評價方法

本標準規定了家用和類似用途電磁灶(以下簡稱“電磁灶”)可靠性定量評價的常用參數及其評價方法。本標準適用于家用和類似用途電磁灶,包括氣、電組合型家用和類似用途器具的電磁加熱部分。本標準不適用于工頻電磁灶、商用電磁灶。本標準也不適用于使用電磁加熱方式但不含電磁灶頭的器具,如電磁加熱電飯煲、電磁加熱飲水機等。

QB/T 5129-2017電磁加熱電飯賃技術要求及試驗方法

本標準規定了電磁加熱電飯煲(鍋)的術語和定義、分類和型號命名、要求、試驗方法、檢驗規則和標志、包裝、運輸、貯存。本標準適用于額定電壓不超過250 V的家用和類似用途的電磁加熱電飯煲(鍋)。

YC/T 384.2-2018煙草企業安全生產標準化規范 第2部分:安全技術和現場規范

YC/T 284的本部分規定了煙草企業安全生產標準化的安全技術和現場規范要求，包括設備設施、作業活動、作業環境和現場運行的安全要求。本部分適用于省級煙草公司(局)、省級工業公司等省級公司、煙草加工和煙草商業生產經營單位。其中，煙草商業生產經營單位特指地市級煙草公司，煙草加工單位含煙葉復烤、卷煙制造、雪茄煙制造、再造煙葉生產的單位。煙草配套和多元化投資的其他生產經營單位，如醋酸纖維、煙草印刷等單位可參照執行。

RB/T 108-2013能源管理體系 家電企業認證要求

本標準規定了對家電企業能源管理體系的認證要求和對家電企業能源使用和消耗實施系統管理的基本要求。本標準適用于家電企業的能源管理體系認證,可用于家電企業建立、實施、保持和改進其能源管理體系,也可作為各相關方考核評價家電企業能源管理體系的依據。

DIN 68930-2009健康目的的廚房用具.要求及試驗

This standard applies to furniture intended for use in domestic kitchen, housework rooms or the like. Kitchen seating as well as detached tables are not within the scope of this standard.

DIN 85005 Bb.1-2005船舶和海上技術.技術文獻的圖形符號.索引

This first supplement of the DIN 85005 contains all the standards according to series DIN 85005 approved of series VG 85005 in all their sections. It will increase the transparency to these standards. And helpts make them more understandable to future users. This supplement also has an attached index with all the subsequent specified standards to ease the us age.

DIN ISO 7000-2008設備用圖形符號.索引和一覽表

This International Standard provides a synopsis of those graphical symbols which are placed on equipment orparts of equipment of any kind in order to instruct the person(s) using the equipment as to its operation.

BS EN 30-1-3-2003家用燃氣灶具.安全.具有玻璃陶瓷熱板的器具

This standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases defined in EN 30-1-1:1998 and EN 30-1-1:1998/A1:1999, having one or more enclosed covered burners under a glass ceramic panel, referred to in the text as \"appliances\".\nThis standard is intended to be used in conjunction with EN 30-1-1:1998 and EN 30-1-1:1998/A1:1999 or EN 30-1-4:2002, and, where appropriate, EN 30-2-1:1999.\nIt does not cover all of the safety requirements and methods of test that are specific to forced convection ovens and/or grills.\nUnless excluded specifically hereafter, this standard covers appliances or their components, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e.g. gas-electric-cookers).\nThis standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with gas. It does not include requirements covering the electrical safety of electrically-heated component parts of their associated equipment.\nThis Standard does not apply to:\n—outdoor appliances;\n—appliances connected to a combustion products evacuation duct;\n—appliances having a pyrolytic gas oven;\n—appliances having automatic burner control systems that\n have a second safety time, or\n control one or more burners that incorporate a separate ignition burner;\n—appliances having an uncovered burner or a non-enclosed covered burner;\n—appliances equipped with air-gas ratio controls;\n—appliances with more than one fan for the supply of combustion air and/or for the evacuation of products of combustion from a combustion chamber;\n—appliances supplied at pressures greater than those defined in 7.1.2.\nThis standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.\nThis standard only covers type testing.\nnote:1) Refer to the electrical safety rules.

BS EN 1775-2007燃氣供應.建筑物用燃氣管道.大工作壓力不超過或等于5 bar.功能性推薦規范

1.1 This standard specifies general recommendations for the design, construction, testing, commissioning,operation and maintenance of installation pipework; pipework between the delivery point of the gas and the inletconnection to the gas appliance.This standard specifies common basic principles for gas installation pipework.Users of this European standard need to be aware that more detailed national standards and/or codes of practicemay exist in the CEN member countries.This standard is intended to be applied in association with these national standards and/or codes of practice settingout the above mentioned basic principles.In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with therequirements of this standard, national legislation/regulation takes precedence as illustrated in CEN /TR 13737.NOTE 1 CEN/TR 13737 contains:- clarification of relevant legislation/regulations applicable in a country;- if appropriate, more restrictive national requirements;- national contact point for the latest information.This standard applies to:- gas installations in residential, commercial and public access building having a maximum operating pressure(MOP) less than or equal to 5 bar;- industrial gas installations having a maximum operating pressure (MOP) less than or equal to 0,5 bar.NOTE 2 For industrial gas installations having a MOP above 0,5 bar, or installations having a MOP above 5 bar, see prEN15001-1.This standard is applicable to new installation pipework as well as to replacements of, or extensions to, existinginstallation pipework.This standard does not contain detailed recommendations relating to the laying of buried pipework.NOTE 3 For more information on buried pipework, see EN 12007-1, EN 12007-2 and EN 12007-3.NOTE 4 For more information on gas pressure regulating installations, see EN 12279.NOTE 5 For more information on gas metering systems, see EN 1776.1.2 This standard is applicable to installation pipework supplied from gas distribution systems and from liquefiedpetroleum gases (LPG) storage vessels.Excluded are:- single appliance LPG installations without fixed pipework, achieved by a flexible appliance connector from anadjacent LPG storage cylinder.- LPG storage vessels.1.3 In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 °C and 1 013,25 mbar.These gases, odorized for safety reasons, are commonly referred to as manufactured gas, natural gas or liquefiedpetroleum gases (LPG). They are also referred to as first, second or third family gases (see EN 437).In this standard, all pressures are gauge pressures, unless otherwise stated.