船用立式海水泵檢測

船用立式海水泵檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 6245-2006消防泵

本標準規定了消防泵、包括無動力消防泵、消防泵組的術語和定義、分類與型號、性能要求、試驗方法、檢驗規則、標志等。 本標準適用于輸送介質以清水、泡沫滅火劑或泡沫溶液為主要滅火劑的消防泵。

GB/T 17005-2019濱海設施外加電流陰極保護系統通用要求

本標準規定了濱海設施外加電流陰極保護系統的保護電位準則，系統的技術要求，系統設計，安裝與檢驗，運行、維護與檢測的要求。本標準適用于海水管道、海水水泵、鼓形旋轉濾網、凝汽器、浮船塢等濱海設施在海水中的外加電流陰極保護。對海水中其他裝置及輸送海淡水、高含鹽水的循環水系統和水中設施的外加電流陰極保護亦可參照使用。

GB/T 50083-2014工程結構設計基本術語標準

本標準適用于房屋建筑、鐵路、公路、水運和水利水電等各類土木工程結構的設計及其相關領域。

GB 51156-2015液化天然氣接收站工程設計規范

本規范適用于陸上新建、擴建和改建的液化天然氣接收站工程的設計。

CB/T 3523-2011船用立式海水泵

本標準規定了在溫度為0℃～50℃、濕度為95%的機艙內以電動機驅動的船用立式海水泵（以下簡稱泵）的要求、試驗方法、檢驗規則和標志、包裝、運輸和貯存等。本標準適用于船舶冷卻系統、壓載系統、消防系統、日用水系統和海水淡化裝置等使用泵的設計、生產與試驗驗收。

CB/T 8524-2011干船塢設計規范

本規范規定了干船塢工藝、水工結構、塢口鋼質塢門、灌水排水系統、公用動力、環境保護和職業安全衛生等設計要求。本規范適用于新建1萬載重噸級以上的船塢設計，對于擴建或改建的船塢工程及修造1萬載重噸級以下船型的船塢設計可參照使用。

JTS 165-2013海港總體設計規范

本規范適用于新建、改建和擴建的海港工程的水域、陸域、裝卸工藝及相應配套設施的總體設計。對以潮汐作用為主而停靠海船或內河船舶的河口港,既有河流水文特性又受潮汐影響停靠海船的河港,總體設計可根據不同情況按本規范和現行行業標準《河港工程總體設計規范》(JTJ 212)的有關規定執行。

JTS 257-2008水運工程質量檢驗標準

本標準適用于港口工程、航道工程和修造船廠水工建筑物工程等水運工程質量的檢驗。

SL 649-2014水文設施工程施工規程

本標準適用于新建、改建、擴建、遷建的各類水文設施工程施工。

SY/T 6874-2012張力腿平臺規劃、設計和建造的推薦做法

本標準作為張力腿平臺設計的指南，側重于在規劃、設計、建造和安裝不同階段中各個的協同。推薦采用圖2所示的設計螺旋。

SY/T 7050-2016灘海陸岸石油設施檢驗技術規范

本標準規定了灘海陸岸石油設施發證檢驗應遵循的技術要求。本標準適用于新建、改建、擴建的灘海陸岸石油設施。

SY/T 7051-2016人工島石油設施檢驗技術規范

本標準規定了人工島石油設施發證檢驗應遵循的技術要求。本標準適用于新建、改建、擴建的人工島石油設施。

RB/T 119-2015能源管理體系 機械制造企業認證要求

本標準規定了機械制造企業能源管理體系的認證要求。本標準適用于機械制造企業的能源管理體系認證,可用于機械制造企業建立、實施、保持和改進能源管理體系,也可作為各相關方評價機械制造企業能源管理體系的依據。

EN ISO 13628-1-2005石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和建議 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

BS EN ISO 13628-1-2005+A1-2010石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和推薦規范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.