歡迎訪問中科光析科學技術研究所官網!
免費咨詢熱線
400-635-0567
螺旋斷層治療裝置檢測項目報價???解決方案???檢測周期???樣品要求? |
點 擊 解 答??![]() |
本標準規定了氧化鋁安全生產的基本安全要求、設備設施安全作業要求以及事故應急措施等。本標準適用于氧化鋁企業的設計、施工、安裝、生產和設備檢修中的安全管理。
GBZ/T 201的本部分給出了電子直線加速器(以下簡稱加速器)放射治療機房的劑量控制要求,輻射屏蔽的劑量估算與檢測評價方法。本部分適用于30 MeV以下的加速器放射治療機房。本部分不適用于手術中加速器電子線治療的機房。
本標準可作為一項給激光設備所有者、責任機構、激光安全員、激光設備操作者和其他相關人員,就如何安全使用3B類或4類的激光和激光設備提供的指南。本標準的范圍至少包括在衛生保健機構、美容與脫毛中心、牙科診所中,還包括在交通工具和家庭住宅中激光束作用于人體的所有應用。本標準闡述了針對患者、操作人員、維修人員的安全性方面控制措施的建議。同時,也對屬于激光設備或裝置一部分的工程控制進行了簡要介紹,以便使大家了解其一般防護原則。本標準涉及的范圍包括:光束傳輸系統;激光輻射的生物效應;事故和危險情況的報告;清單。本標準的目的使用過提供如何建立安全規程、預防措施和用戶控制措施的指導,使人員更好的防護激光輻射和其他相關危害。
本標準適用于放射治療計劃系統(以下簡稱RTPS),規定了RTPS的質量保證指導原則。
本測試方法通過施加流體脈動負載使得血管支架處于與體內環境類似的直徑膨脹水平來評價血管支架的耐久性能。該方法適用于已經在模擬血管(模擬血管彈性)中擴張的支架測試樣品。典型的耐久測試期相當于10年時間(按照每分鐘72次心跳計算)或至少3億8千萬次心動周期。本方法適用于金屬或合金的球囊擴張支架或自擴張支架。雖然這個測試方法也可用于涂層支架、聚合物支架或降解支架產品,但并不特別針對這些支架所特有的屬性。本方法并不推薦用于治療動脈瘤或外周血管損傷或提供血管通路的覆膜支架或其他導管產品。但其中的一些信息也許可以用在這些產品的評價上。本方法適用于由于典型的周期性血管直徑膨脹導致的支架失效,但不涉及動態彎曲、扭轉、拉伸、擠壓或磨損等導致支架失效的模式。本方法不涉及彎曲血管模型的測試條件。本方法不涉及支架重疊測試條件。本標準并非試圖對所涉及的所有安全問題進行闡述,即便需要,也應結合其使用。確立適當?shù)陌踩】档牟僮饕?guī)范,以及在應用前明確管理權限,是本標準用戶自身的責任。
本規范適用于新建、擴建、改建的化工建設項目的安全衛生設計。
本標準規定了水利水電工程土建施工的安全技術要求。本標準適用于大中型水利水電工程土建施工中的安全技術管理、安全防護與安全施工,小型水利水電工程及其他土建工程可參照?qǐng)?zhí)行
本標準規定了參加水利水電工程施工作業人員安全、文明施工的行為規范。本標準規定了參加水利水電工程施工作業人員安全、文明施工的行為規范。
本標準規定了衛生行業醫療器械、儀器設備(商品、物資)的分類與代碼。 本標準適用于衛生行業各醫療、教學、科學研究和生物制品等單位對物資管理、計劃、統計及會計業務等使用。
本規范適用于新建、擴建和改建醫療建筑的電氣設計
本規程適用于醫用診斷螺旋計算機斷層攝影裝置(CT)放射治療模擬定位X射線輻射源(以下簡稱CT放療模擬定位輻射源)的首次檢定、后續檢定和使用中的檢查。
Eurocode 7(1) EN 1997 is intended to be used in conjunction with EN 1990:2002, which establishes the principles and requirements for safety and serviceability, describes the basis of design and verification and gives guidelines for related aspects of structural reliability. (2) EN 1997 is intended to be applied to the geotechnical aspects of the design of buildings and civil engineering works. It is subdivided into various separate parts (see ). (3) EN 1997 is concerned with the requirements for strength, stability, serviceability and durability of structures. Other requirements, e. g. concerning thermal or sound insulation, are not considered. (4) Numerical values of actions on buildings and civil engineering works to be taken into account in design are provided in EN 1991 for the various types of construction. Actions imposed by the ground, such as earth pressures, shall be calculated according to the rules of EN 1997. (5) Separate European Standards are intended to be used to treat matters of execution and workmanship. They are denoted in the relevant sections. (6) In EN 1997 execution is covered to the extent that is necessary to conform to the assumptions of the design rules. (7) EN 1997 does not cover the special requirements of seismic design. EN 1998 provides additional rules for geotechnical seismic design, which complete or adapt the rules of this standard. EN 1997-2 (1) EN 1997-2 is intended to be used in conjunction with EN 1997-1 and provides rules supplementary to EN 1997-1 related to: planning and reporting of ground investigations; general requirements for a number of commonly used laboratory and field tests; interpretation and evaluation of test results; derivation of values of geotechnical parameters and coefficients. In addition, examples of the application of field test results to design are given. NOTE Establishment of characteristic values is covered in EN 1997-1. (2) This document gives no specific provisions for environmental ground investigations. (3) Only commonly used geotechnical laboratory and field tests are covered in this standard. These were selected on the basis of their importance in geotechnical practice, availability in commercial geotechnical laboratories and existence of an accepted testing procedure in Europe. The laboratory tests on soils are mainly applicable to saturated soils. NOTE It is expected that updates of the present standard will gradually include laboratory and field tests covering additional aspects of soil and rock behaviour. (4) The provisions of this standard apply primarily to projects of geotechnical category 2, as defined in 2.1 of EN 1997-1:2004. The ground investigation requirements for category 1 projects are normally limited as the verifications often will be based on local experience. For geotechnical category 3 projects, the amount of investigations required will normally be at least the same as indicated for geotechnical category 2 projects in the following sections. Additional investigations and more advanced tests, related to the circumstances that place a project in geotechnical category 3, may be necessary. (5) The derivation of parameter values is dedicated primarily to the design of pile and spread foundations based on field testing, as detailed in Annexes D, E, F and G of EN 1997-1:2004.
This standard specifies dosimetric methods used in X-ray diagnosis in the context of quality assurance and radiation protection for measuring of dose quantities and technical properties.
The standard contains terms and definitions for the dosimetry in the context of therapeutic and diagnostic applications of ionizing radiation and radiation protection as well.
Requirements for the execution, interpretation and use of results of laboratory tests to assist in the geotechnical design of structures
This standard defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61), and general terms and definitions of polymer science used in all aspects of plastics technology.
This International Standard defines a list of terms used in the field of soil quality. The terms are classified under several main headings: general terms - description of soil - sampling - terms related to the assessment of soils and remediation.
This British Standard gives general recommendations for tree work.It gives guidance on management options for established trees(including soil care and tree felling) and overgrown hedges.NOTE The principles of this standard may also be applied to some shrubs,which can have similar characteristics to trees.This British Standard does not give guidance on carrying out tree surveys or tree inspections. It considers the impact of work on an individual tree in relation to neighbouring trees, but does not cover overall management of tree populations.