粗制銅鈷檢測

粗制銅鈷檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 6274-2016肥料和土壤調理劑 術語

本標準給出了肥料和土壤調理劑的術語和定義，分為以下幾類：一般術語、產品術語、物理性質術語、物理化學性質術語、安全術語和采樣術語。本標準適用于用于保持或改善植物營養和土壤物理化學性質以及生物活性的各種物料。

MT/T 1097-2008煤礦機電設備檢修技術規范

本規范為企業的設備檢修提供指導意見,可作為企業制定設備檢修細則、檢修操作規程和設備完好標準的依據。本規范執行《煤炭法》、《礦山安全法》、《煤礦安全監察條例》、《煤礦安全規程》等煤炭法律、法規、規程和管理標準,執行和有關煤炭行業的所有技術標準。本規范通用部分的技術要求和計量單位等執行或有關行業的技術標準。

SJ/T 11143-1997計算機用普通話語音庫規范

本標準主要適用于中文信息處理的語音處理系統，另外對語音研究、語音評測也具有指導作用。

YS/T 1332.1-2019粗制銅鈷原料化學分析方法 第1部分：鈷含量的測定 電位滴定法

本部分規定了粗制銅鈷原料中鈷含量的測定方法。\r 本部分適用于粗制銅鈷原料中鈷含量的測定。測定范圍：5.00 %~60.00 %。

YS/T 1332.2-2019粗制銅鈷原料化學分析方法 第2部分：銅含量的測定 碘量法

本部分規定了粗制銅鈷原料中銅含量的測定方法。\r 本部分適用于粗制銅鈷原料中銅含量的測定，測定范圍：4.00 %～30.00 %。

YS/T 1332.3-2019粗制銅鈷原料化學分析方法 第3部分：硫含量的測定 高頻燃燒-紅外光譜法

本部分規定了粗制銅鈷原料中硫含量的測定方法。\r 本部分適用于粗制銅鈷原料中硫含量的測定。測定范圍： 0.010 %~4.00 %。

YS/T 1333-2019粗制銅鈷原料

本標準規定了粗制銅鈷原料的技術要求、試驗方法、檢驗規則、包裝、標志、運輸、貯存、質量預報單及訂貨單(或合同)內容。本標準適用于在電爐或鼓風爐中將富鈷氧化精礦還原熔煉成的粗制銅鈷原料。

YS/T 1412-2021鈷冶煉企業單位產品能源消耗限額

本標準規定了鈷冶煉企業單位產品能源消耗(以下簡稱能耗)限額的術語和定義、技術要求、統計范圍、計算方法和節能管理與措施。本標準適用于以硫化鈷銅礦、粗碳酸鈷、粗氫氧化鈷、粗制銅鈷原料、電池廢料以及鎳冶煉鈷渣等為原料的鈷冶煉企業產品能耗的計算、考核，以及對新建項目的能耗要求。

EN ISO 13628-1-2005石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和建議 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

BS EN ISO 13628-1-2005+A1-2010石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和推薦規范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.