您的位置：首頁 > 其他

聚乙烯系統熔接設備檢測

發布日期： 2024-06-21 17:34:53 - 更新時間：2024年06月29日 15:22

聚乙烯系統熔接設備檢測項目報價？??解決方案？??檢測周期？??樣品要求？

GB/T 13663.3-2018給水用聚乙烯(PE)管道系統 第3部分:管件

GB/T 13663的本部分規定了以聚乙烯(PE)混配料為原料，經注塑或其他方式成型的給水用聚乙烯管件(以下簡稱“管件”)的術語和定義、符號、縮略語、材料、產品分類、要求、試驗方法、檢驗規則、標志和包裝、運輸、貯存。本部分與GB/T 13663的其他部分一起，適用于水溫不大于40 ℃，大工作壓力(MOP)不大于2.0 MPa，一般用途的壓力輸水和飲用水輸配的聚乙烯管道系統及其組件。

GB/T 20674.1-2020塑料管材和管件聚乙烯系統熔接設備第1部分:熱熔對接

GB/T 20674的本部分規定了電熱板加熱的聚乙烯(PE)管道系統熱熔對接設備(簡稱熔接設備)的術語和定義、分類、要求、電源、試驗方法、輔助裝置及隨機文件、維護、檢驗規則、標志、包裝、運輸和貯存。本部分與GB/T 20674的其他部分一起，適用于燃?xì)?給水用聚乙烯管材和管件用熔接設備，其燃?xì)庥霉懿暮凸芗螱B/T 15558(所有部分)，飲用水及一般壓力輸水用管材和管件符合GB/T 13663(所有部分)。

GB/T 20674.2-2020塑料管材和管件聚乙烯系統熔接設備第2部分:電熔連接

GB/T 20674的本部分規定了聚乙烯(PE)管道系統電熔連接設備(以下簡稱“電熔焊機”)的術語和定義、分類、要求、試驗方法、隨機文件、維護、檢驗規則、標志、包裝、運輸和貯存。本部分與GB/T 20674的其他部分一起，適用于燃?xì)?給水用聚乙烯管材和管件用熔接設備。聚乙烯燃?xì)庥霉懿暮凸芗欠螱B/T 15558(所有部分)要求的，飲用水及一般壓力輸水用管材和管件是符合GB/T 13663(所有部分)要求的。本部分適用于以電壓或電流方式進行控制的電熔焊機，電熔焊機適用于采用電阻絲加熱的管件。電熔焊機分為三種輸入電壓等級：P<下標1>級電壓(SVLV，不大于50 V)；P<下標2>級電壓(LV，大于50 V且不大于250 V)；P<下標3>級電壓(HV，大于250 V且不大于400 V)。電熔焊機正常工作環境溫度范圍為-10 ℃~+40 ℃。注1：若環境溫度超出范圍，由供需雙方協商一致。注2：電熔焊機用于燃?xì)?給水用部件（如閥門、鋼塑轉換等）的頂制裝配連接或用于核電管、冷熱水用PE-RT管、工業用管、復合管等連接時，由供需雙方協商一致。

GB/T 20674.3-2020塑料管材和管件聚乙烯系統熔接設備第3部分:操作者代碼

GB/T 20674的本部分規定了聚乙烯(PE)管道系統熔接設備操作者代碼的術語和定義、數據載體、數據編碼。本部分與GB/T 20674的其他部分一起，適用于燃?xì)?給水用聚乙烯管道系統熔接設備和操作者。

GB/T 20674.4-2020塑料管材和管件聚乙烯系統熔接設備第4部分:可追溯編碼

GB/T 20764的本部分規定了聚乙烯(PE)管道系統熔接設備用可追溯編碼的術語和定義、編碼系統設計、信息編碼、數據載體。本部分與GB/T 20764的其他部分一起，適用于燃?xì)?給水用聚乙烯管道系統熔接設備的可追溯性。所編代碼通過字母或數字識別讀取，如：條形碼等。本部分還適用于聚乙烯燃?xì)?給水用管道系統的管材、管件和閥門，以及其組合件的熔接。例如：使用熔接工具進行的熱熔對接、熱熔承插連接或熱熔鞍形連接、電熔連接(承口和鞍形)、感應熔接以及機械連接等。

GB/T 32434-2015塑料管材和管件燃?xì)夂徒o水輸配系統用聚乙烯(PE)管材及管件的熱熔對接程序

本標準規定了用PE 80和PE 100聚乙烯混配料制造的燃?xì)夂徒o水輸配系統用聚乙烯(PE)管材及管件的熱熔對接程序及其質量控制的一般原則。本標準規定的熱熔對接程序適用于公稱外徑由75 mm~630 mm的燃?xì)夂徒o水輸送系統用聚乙烯(PE)管材及管件；單一低壓熱熔對接程序適用于壁厚不大于70 mm的燃?xì)夂徒o水輸送系統用聚乙烯(PE)管材及管件的熱熔對接程序；雙重低壓熱熔對接程序適用于壁厚大于22 mm且不大于70 mm的燃?xì)夂徒o水輸送系統用聚乙烯(PE)管材及管件的熱熔對接程序。

HG/T 4281-2011塑料焊接工藝規程

本標準規定了塑料焊接工藝規程的術語和定義，熱風焊、擠出焊、熱熔焊和電熔焊的工藝規程、質量檢測與焊工要求。本標準適用于聚氯乙烯(PVC：包括氯化聚氯乙烯PVC-C、硬質聚氯乙烯PVC-U、軟質聚氯乙烯PVC-R)、聚丙烯(PP：包括嵌段共聚聚丙烯PP-B、均聚聚丙烯PP-H、無規共聚聚丙烯PP-R)、聚乙烯(PE：包括高密度聚乙烯PE-HD、中密度聚乙烯PE-MD、低密度聚乙烯PE-LD)、聚偏氟乙烯(PVDF)、改性聚四氟乙烯(PTFE-TFM)、丙烯腈/丁二烯/苯乙烯塑料(ABS)、聚酰胺(PA)等熱塑性塑料和塑料合金的管材和板材的焊接工藝規程。

HG/T 5100-2016塑料焊接機具熱熔焊機

本標準規定了用電熱板加熱的塑料管道、板材的熱熔對接焊機的術語和定義，產品描述，要求，試驗方法，檢驗規則以及標識、包裝、運輸和貯存。本標準適用于聚乙烯(PE)、聚丙烯(PP)、聚偏氟乙烯(PVDF)、聚酰胺(PA)塑料材料制的管材、管件和/或板材的熱熔對接焊機。

HG/T 5101-2016塑料焊接機具電熔焊機

本標準規定了用電阻絲加熱的塑料管道、板材的電熔連接焊機的術語和定義，產品描述，要求，試驗方法，檢驗規則以及標識、包裝、運輸和貯存。本標準適用于聚乙烯(PE)、聚丙烯(PP)、聚偏氟乙烯(PVDF)、聚酰胺(PA)塑料材料制的管材、管件和/或板材的電熔連接焊機。

SY/T 6662.3-2012石油天然氣工業用非金屬復合管第3部分：增強MC尼龍管和尼龍-鋼復合管

SY/T 6662的本部分規定了增強MC尼龍管材及管件、尼龍-鋼復合管材及管件的分類和標記、原材料、技術要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存等。本部分主要適用于石油天然氣工業輸送液體介質的管道的設計和生產，石化、冶金、礦山、電力、海水處理及其他行業用于輸送液體介質的管道設計和生產可參照本部分。增強MC尼龍管輸送液體介質溫度的允許范圍為-35℃~100℃；尼龍-鋼復合管輸送液體介質溫度的允許范圍為-35℃~150℃。

ISO 12176-2-2008塑料管材和管件.熔解焊接聚乙烯系統用設備.第2部分:電熔焊

This part of ISO 12176 specifies performance requirements for electrofusion control units for use withpolyethylene (PE) electrofusion fittings for the supply of gaseous fuels or for the conveyance of water forhuman consumption, including raw water prior to treatment, and for the conveyance of water for generalpurpose or other fluids.The control units are divided into three input voltage classes: SVLV [safety, very Iow voltage (up to 50 V)], LV[Iow voltage (50 V to 250 V)] and HV [higher voltage (250 V to 400 V)].This part of ISO 12176 is applicable to electrofusion control units designed for use in the construction of jointsbetween PE pipes and fittings conforming to International Standards for the supply of gaseous fuels or for theconveyance of water, where the normal operating temperature of the control unit is in the range -10 ~C to+40 ~C. If temperatures outside this range are expected, suitable operating limits are subject to agreementbetween manufacturer and purchaser.This part of ISO 12176 is applicable to control units with current or voltage control for fitting systems based onstandard resistance wire heating technology.

ISO 12176-3-2011塑料管與管件.聚乙烯系統的熔接設備.第3部分:操作者徽章

This part of ISO 12176 describes the format and the contents of a fusion operator's badge, which is usedduring the construction of polyethylene (PE) piping systems for the supply of gaseous fuels or water to identifythe fusion operator and to activate or deactivate the fusion-jointing equipment.The objective of this part of ISO 12176 is to achieve international interoperability between the operator'sbadge and the card-reading equipment of fusion-jointing equipment conforming to ISO 12176-1 orISO 12176-2. The fusion-jointing equipment is required to read either the bar code or the magnetic-stripe codeof the badge and to call up the corresponding data within the equipment in a standard format.

ISO 12176-4-2003塑料管材和管件.聚乙烯系統的熔接設備.第4部分:可追蹤性編碼

This part of ISO 12176 specifies an encoding system for data on components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas supply, for use in a traceability system.\nReading of the codes can be carried out using alphanumeric or numeric data-recognition systems such as bar-code, magnetic-stripe card or microchip card readers.\nOther data-recognition systems conforming to ISO/TR 13950 may be used in association with one of the specified recognition systems to obtain the required traceability.\nThis part of ISO 12176 is applicable to PE pipes, fittings and valves conforming to ISO standards for gas supply piping systems and also to the assembly operation utilizing methods such as fusion using a heating tool (butt, socket and saddle fusion), electrofusion (socket and saddle fusion), induction fusion and mechanical jointing.

ISO 12176-5-2021塑料管和配件. 聚乙烯系統熔接設備. 第5部分: 聚乙烯管道系統部件的二維數據編碼和數據交換格式

This document specifies an encoding system for data of components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas, water and other industrial applications. These data can be used in a traceability system and/or used to perform the fusion of components by using equipment as specified in ISO 12176-1 and in ISO 12176-2. This encoding system is explained in ISO/IEC 16022, ISO/IEC 18004 and ISO/IEC 24778 which refer to established code types, e.g. QR code. Data to be encoded are: fusion cycle(s), traceability of manufactured products, other manufacturer's information that can also be given on websites such as voluntary certificates of quality and approvals. This document specifies the export of data (type, format and sequence) from a data retrieval system. Provisions of this document are applicable to polyethylene components conforming to ISO 4427-2, ISO 4427-3, ISO 4437-2, ISO 4437-3, ISO 4437-4 and ISO 15494, and can also be applicable to any other c

TS ISO 12176-1-2015塑料管材和管件. 聚乙烯系統熔接設備. 第1部分: 熱熔對接

This part of ISO 12176 specifies the general characteristics of, and performance requirements for, equipment for butt fusion jointing of polyethylene (PE) piping systems using electrically powered heater plates.