工業用電纜卷盤檢測

工業用電纜卷盤檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 19517-2009電氣設備安全技術規范

本標準適用于交流額定電壓1200V以下、直流額定電壓1500V以下的各類電氣設備。本標準不適用于：本規范規定的電氣設備的材料和輔助材料除外;不能獨立使用的半成品或初級產品;用于醫療目的的電氣設備;爆炸環境中使用的電氣設備;電梯;電柵欄激發器;船舶、飛行器和鐵路等特殊電氣設備。

GB/T 24976-2023電器附件環境意識設計導則

本文件給出了電器附件產品環境意識設計的原則和內容，提供了將環境意識設計的要素引入設計和開發的指導。本文件適用于下列類別電器附件產品的環境意識設計，其他類別的電器附件產品參照使用：——電纜管理用電氣導管和槽管系統；——家用和類似用途電纜卷盤；——工業用插頭插座和耦合器；——家用和類似用途插頭插座；——家用和類似用途器具耦合器；——家用和類似用途低壓電器用連接器件；——家用和類似用途固定式電氣裝置的開關。

GB/T 34135-2017工業用電纜卷盤

本標準規定了工業用電纜卷盤的結構、機械性能、電氣性能等技術要求。本標準適用于工業、戶外和戶內使用，額定工作電壓不超過690 V d.c.或a.c.和500 Hz a.c.，額定電流不超過63 A的裝有一根不可拆卸軟電纜的電纜卷盤。電纜卷盤所使用的電器附件應符合GB/T 11918.1或GB/T 11918.2的要求。本標準適用于：——配備符合GB/T 11918.1或GB/T 11918.2的一個插頭或器具輸入插座和至少一個輸出插座的移動式電纜卷盤；——至少配備有符合GB/T 11918.1或GB/T 11918.2的一個輸出插座的固定電纜卷盤；——使用環境溫度通常在-25 ℃~+40 ℃之間。工業電纜卷盤可用于建筑工地、農業生產、商業及家庭。本標準同時適用于在特低電壓裝置上使用的電纜卷盤。在特殊環境下，如船艙、車輛和類似其他場合，或容易發生爆炸的地點，可能要有附加要求。

GB/T 36028.2-2018靠港船舶岸電系統技術條件 第2部分:低壓供電

GB/T 36028的本部分規定了靠港船舶岸電系統低壓供電(低壓上船)的結構、一般要求、技術要求及檢驗。本部分適用于港口低壓供電形式的靠港船舶岸電系統。

GB 50016-2014(2018)建筑設計防火規范(2018年版)

本規范適用于下列新建、擴建和改建的建筑：廠房；倉庫；民用建筑；甲、乙、丙類液體儲罐(區)；可燃、助燃氣體儲罐(區)；可燃材料堆場；城市交通隧道。人民防空工程、石油和天然氣工程、石油化工工程和火力發電廠與變電站等的建筑防火設計，當有專門的標準時，宜從其規定。本規范不適用于火藥、炸藥及其制品廠房(倉庫)、花炮廠房(倉庫)的建筑防火設計。

GB 50295-2016水泥工廠設計規范

本規范適用于新建、改建和擴建水泥工廠的設計。

GB 50974-2014消防給水及消火栓系統技術規范

本規范適用于新建、擴建、改建的工業、民用、市政等建設工程的消防給水及消火栓系統的設計、施工、驗收和維護管理。

GB 51062-2014煤礦設備安裝工程施工規范

本規范適用于煤礦建設及生產系統設備安裝工程的施工。

JC/T 834-2011水泥工業用堆料機.技術條件

本標準規定了水泥工業用堆料機的技術要求、試驗方法、檢驗規則、標志、包裝運輸和貯存。本標準適用于預均化堆場對松散物料進行堆料的水泥工業用卸料車式堆料機和懸臂帶式堆料機（以下簡稱堆料機）。

JC/T 835-2011水泥工業用取料機.技術條件

本標準規定了水泥工業用取料機（以下簡稱取料機）的技術要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于預均化堆場對松散物料進行取料的水泥工業用橋式斗輪取料機、橋式刮板取料機和懸臂刮板取料機。

MH/T 6100-2013飛機管線加油車

本標準規定了民用機場的飛機管線加油車的技術要求、試驗方法、檢驗規則及產品標志、包裝、運輸、儲存等要求。本標準適用于民用機場的飛機管線加油車(以下簡稱加油車)的制造與驗收。

MH/T 6101-2013飛機罐式加油車

本標準規定了民用機場的飛機罐式加油車的技術要求、試驗方法、檢驗規則及產品標志、包裝、運輸、儲存等要求。本標準適用于民用機場的飛機罐式加油車(以下簡稱加油車)的制造與驗收。

SN/T 3020.1-2011進出口電器附件檢驗規程.第1部分：通用要求

本部分規定了進出口電器附件的抽樣、檢驗及結果判定。本部分適用于以下六大類電器附件產品的檢驗:—電纜管理系統類；—插頭和插座類；—開關類；—連接器件類；—藕合器類；—安裝盒類。本部分不適用于已發布SN檢驗規程的電器附件的檢驗。

UL 1776-2002高壓清洗機

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.

DIN EN ISO 13628-10-2007石油和天然氣工業.水下開采系統的設計和操作.第10部分:連接柔性管規范

The text has been taken over as ISO 13628-10:2005.

DIN EN ISO 13628-11-2008石油和天然氣工業.水下生產系統的設計和操作.第11部分:水下和海上用軟管系統

This part of ISO 13628 provides guidelines for the design, analysis, manufacture, testing, installation andoperation of flexible pipes and flexible pipe systems for onshore, subsea and marine applications. This part ofISO 13628 supplements ISO 13628-2 and ISO 13628-10, which specify minimum requirements for the design,material selection, manufacture, testing, marking and packaging of unbonded and bonded flexible pipe,respectively.This part of ISO 13628 applies to flexible pipe assemblies, consisting of segments of flexible pipe body withend fittings attached to both ends. Both bonded and unbonded pipe types are covered. In addition, this part ofISO 13628 applies to flexible pipe systems, including ancillary components.The applications covered by this part of ISO 13628 are sweet- and sour-service production, including exportand injection applications. This part of ISO 13628 applies to both static and dynamic flexible pipe systemsused as flowlines, risers and jumpers. This part of ISO 13628 does cover, in general terms, the use of flexiblepipes for offshore loading systems.NOTE Refer also to Reference [30] for offshore loading systems.This part of ISO 13628 does not cover flexible pipes for use in choke and kill lines or umbilical and controllines.

BS EN 12921-1-2005+A1-2010使用液體或蒸氣的工業設備的表面清潔和預處理機器.通用安全性要求

1.1 This standard applies to machines for surface cleaning and pre-treatment – in the following called\"cleaning machines\" – of industrial items using liquids or vapours, i.e. stationary machines and relatedequipment for automated and manual cleaning and pre-treatment processes.NOTE Cleaning machines are operated with or without heating, for example as dipping or spraying or vapourcondensation process, where additional using of ultrasound is possible. These cleaning machines could be designed assingle-zone or multi-zone machine, chamber machines, drum cleaning machine, low lift truck machines, round timemachines or tunnel (continuous) machines.To the extent of this document, cleaning machines for industrial items are considered as an assembly of thefollowing equipment:? pump(s) and/or other mechanical system of agitation, recirculation and spraying of cleaning liquid;? forced ventilation system;? heating system with temperature control;? condensation system;? filtration and separation system and/or solid particles extraction from the liquid;? conveyor and/or handling system for the items to be processed;? product handling systems and reciprocators which are part of the cleaning machine;? control and/or monitoring systems;? liquid handling system.1.2 This European Standard deals with the common significant hazards, hazardous situations and eventsrelevant to cleaning machines for industrial items using liquids or vapours when they are used as intendedand under the conditions foreseen by the manufacturer (see clause 4). This part of the standard defines thecommon safety requirements for all kinds of cleaning machines for industrial items using liquids or vapoursand related common devices and should be used in connection with other parts of the EN 12921-series. Thespecific requirements specified in part 2 and following parts of EN 12921 take precedence over the respectiverequirements in EN 12921.NOTE In addition, where a cleaning machine is not covered by a specific part of this document, part 1 of EN 12921can be used to establish the approach for dealing with the relevant risks.Specific hazards which are related to the type of cleaning liquid used are dealt with in the followingdocuments:? EN 12921-2 for water based cleaning liquids;? EN 12921-3 for flammable cleaning liquids;? prEN 12921-4 for halogenated solvents.1.3 ! This standard is not applicable to machines for:? mobile portable cleaning,? high pressure cleaning with high pressure water jet according to prEN 1829-1,? conveyor dishwashing according to EN 50416,? surface cleaning employing liquids according to EN 60335-2-54,? commercial electric dishwashing according to EN 60335-2-58,? cleaning with high pressure and steam according to EN 60335-2-79,? plasma cleaning,? mechanical blasting,? thermal cleaning,? drying processes,? cleaning of textiles or clothes,? food processing.This standard is not applicable to the following equipment:? loading and unloading systems,? automatic systems, e.g. robots as covered by EN ISO 10218-1,? centrifuges as covered by EN 12547,? pumps and pump units for liquids as covered by EN 809.\"1.4 This standard is not applicable to cleaning machines for industrial items which are manufactured beforethe date of publication of this document by CEN.