與人體暴露于電磁場有關的照明設備的評估檢測

與人體暴露于電磁場有關的照明設備的評估檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 20850-2014機械安全 機械安全標準的理解和使用指南

本標準規定了機械安全各相關標準的提綱性內容。本標準可為機械及相關設備的設計者和制造商提供幫助,特別是在缺少特定C類標準的情況下,能幫助設計者和制造商正確理解相關的機械安全標準。

GB/T 31275-2020照明設備對人體電磁輻射的評價

本標準用于人體暴露于照明設備電磁輻射的評估。評價包括頻率介于20 kHz~10 MHz之間的感應內部電場和照明設備周圍頻率介于100 kHz~300 MHz的比吸收率(SAR)。本標準適用于：——用于照明，以產生和/或分配光為主要功能，采用低電壓供電或電池工作，供室內和/或室外使用的所有照明設備；——主要功能之一是照明的多功能設備中的照明設備；——專門與照明設備一起使用的獨立輔助設備；——帶有用于無線通信或控制的有意輻射體的照明設備。本標準不適用于：——飛機和機場用照明設備；——道路車輛用照明設備；(但用于公共交通中乘客車廂照明的照明設備除外)——農業用光照設備；——輪船/船舶用照明設備；——復印機、幻燈片投影儀；——電磁場要求在其他標準中有明確規定的設備。本標準不適用于燈具的內裝式元件，如燈的電子控制裝置。

GB 51204-2016建筑電氣工程電磁兼容技術規范

本規范適用于新建、擴建和改建的民用建筑和一般工業建筑的電氣工程電磁兼容的設計、施工、檢測及驗收。

JT/T 1079-2016船員職業健康和安全保護及事故預防

本標準規定了船舶上的船員職業健康和安全保護及事故預防中的基本要求、一般職責、安全委員會、培訓和指導、事前事故預防、事中過程控制及事后調查處置。本標準適用于船員職業健康和安全保護及事故預防。

GSO IEC 62493-2016與人體暴露于電磁場有關的照明設備的評估

IEC 62493:2015 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced internal electric field for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) identification of lighting product types deemed to comply with the standard without the need for test; b) deletion of the need for CISPR-15-compliance as a prerequisite for IEC 62493 compliance; c) inclusion of the consequences of the ICNIPR 2010 guidelines for (up to 100 kHz); d) adding some guidance to the Van der Hoofden test head method to improve reproducibility of results; e) inclusion of compliance demonstration method for products having intentional radiators.

DIN EN 14010-2009機械安全.汽車用動力驅動制動設備.設計,制造,安裝和交付使用階段的安全和電磁兼容性要求,德文版EN 14010:2003+A1:2009

1.1 This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation1, operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered. 1.2 This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled. 1.3 This standard does not cover: a) vehicle lifts (see EN 1493); b) peripheral devices, which do not handle motor vehicles, e.g. parking meters, ticket machines; c) requirements related to the building even if they support directly stored vehicles; d) goods only lifts in accordance with EN 81-31; e) power driven parking equipment intended for lifting and/or transporting any person; f) transmission and interface of remote controls; g) automatic parking equipment with transfer areas which move; h) the use of power driven parking equipment by wheelchair users and deaf persons; i) the workplace of any attendant. 1.4 This standard does not deal with the following: a) hazards arising if loads, or other items fall from vehicles; b) hazards arising if fuel or oil leaks from vehicles; c) hazards caused by operating the equipment/system in electromagnetic fields outside the range of EN 51000-6-2; d) hazards caused by operating the equipment/system in areas subject to special regulations (e.g. explosive atmospheres, fire risks); e) hazards caused by the use of dangerous/toxic materials, e.g. special hydraulic oil; f) hazards caused by noise; g) hazards arising from inadequate lighting of the surrounding of automatic parking systems and/or the place of installation of non-automatic parking equipment; h) hazards caused by earthquakes; i) hazards caused by vandalism; j) hazards due to the use of programmable electronic systems related to safety functions;k) hazards due to the use of cableless control devices;I) hazards arising due to collision caused by the driver of the vehicle.This document is not applicable to power driven parking equipment and systems manufactured before the date ofpublication of this document by CEN.

DS/EN 62493-2010與人體暴露于電磁場有關的照明設備的評估

IEC 62493:2009 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced current density for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This standard does not apply to built-in components for luminaires such as electronic control gear.

DS/IEC/TR 62493-1-2013與人體暴露于電磁場相關的照明設備的評估 - 第1部分:VDE測試認證機構與德國電氣和電子制造商協會ZVEI的EMF測量活動結果

This part of the IEC 62493 series presents an overview on the EMF measurement results dependent of different lamp technologies used in current luminaires.For the measurement only the test procedure with the so called Van der Hoofden Head in the frequency