鋰離子堿性電池檢測

鋰離子堿性電池檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 2900.41-2008電工術語.原電池和蓄電池

本部分規定了用于原電池和蓄電池領域的一般術語。

GB/T 3883.1-2014手持式、可移式電動工具和園林工具的安全 第1部分:通用要求

GB 3883的本部分涉及電動機或電磁鐵驅動的:--手持式電動工具(第2部分);--可移式電動工具(第3部分);--園林工具(第4部分)。以下簡稱“工具”。交流單相或直流工具的額定電壓不大于250 V,交流三相工具的額定電壓不大于440 V。大額定輸入功率不超過3 700 W。本部分涉及人們?cè)谡２僮饕约昂侠砜深A(yù)見的使用工具時遇到的由工具引發的危險。帶電加熱元件的工具屬本部分范圍。這些加熱元件的要求在GB 4706的相關部分中規定。對于不與電網隔離、且基本絕緣由不按工具額定電壓設計的電動機,其要求在附錄B中規定。對于由可充電電池供電的電動機驅動或電磁鐵驅動的工具以及用于這些工具的電池包,其要求在附錄K中規定。對于能直接接在市電或非隔離電源上操作和/或充電的這類工具,其要求在附錄L中規定。不用對工具自身作任何改造便能夠安裝到一個支架或工作臺當作固定式工具使用的手持式電動工具屬于本部分范圍,由第3部分來規定。本部分不適用于:--在爆炸性環境(塵埃、蒸汽或氣體)中使用的工具;--制備和加工食品用工具;--醫療用工具;--與化妝品和藥品一起使用的工具;--加熱工具;--電動機驅動的家用或類似用途電器;--工業機床用電氣設備;--用來制作模型的由低壓變壓器驅動的小型臺式工具,如制作遙控飛機模型或汽車模型等。

GB/T 35145-2017冷鏈溫度記錄儀

本標準規定了冷鏈溫度記錄儀(以下簡稱記錄儀)的產品分類和基本參數、技術要求、試驗方法、檢驗規則及標志、包裝、貯存要求。本標準適用于電子式冷鏈溫度記錄儀,不適用于機械走紙式記錄儀。

MT/T 975-2006礦用超低頻電場透視儀技術條件

本標準規定了礦用超低頻電場透視儀（以下簡稱電透儀）的術語和定義、要求、測試方式、檢驗規則、標志、包裝、運輸和貯存。 本標準適用于煤礦井下對地質體做超低頻電場透視探測使用的地質勘探儀器。

GA 883-2018公安單警裝備 強光手電

本標準規定了公安單警裝備強光手電的術語和定義、分類和編號、技術要求、試驗方法、檢驗規則及包裝、標志、運輸與貯存。本標準適用于公安單警裝備強光手電產品的生產、檢驗與驗收。

UL SUBJECT 2755-2011模塊化數據中心的研究概況

1.1 This Outline of Investigation covers Modular Data Centers (MDC). The Modular Data Centers coveredby these requirements are pre-fabricated units consisting of an outer enclosure housing ITE and varioussupport equipment such as electrical service and distribution equipment, HVAC systems and the like.Some configurations may have the support equipment housed in a separate enclosure. A typicalconstruction may use a standard ISO shipping container or other structure as the outer enclosure, racksor cabinets of ITE, NEC compliant service entrance equipment and power distribution components, powerstorage such as a UPS and an air or liquid cooling system.1.2 These factory-built modules incorporate pre-installed materials and equipment which, afterinstallation, may be concealed and may not be accessible for inspection at the final installation site.1.3 The modular data centers covered by these requirements are intended for fixed installation eitherindoors or outdoors based on their construction and resistance to environmental conditions. MDCsintended for outdoor use shall be identified with a NEMA environmental class rating.1.4 These requirements are intended to demonstrate compliance with the National Electrical Code (NEC),NFPA 70 and other national Codes such as Building, Fire, Plumbing, Mechanical, and the like. Wherestate or local codes differ from the national codes anticipated by these requirements, determiningcompliance with these codes is the responsibility of the local authority having jurisdiction.1.5 When these requirements do not cover a specific technology or construction feature, the applicablerequirements of the National Codes shall be used.1.6 This Outline of Investigation assumes that the final installation of the MDC will be performed byqualified service personnel in accordance with the applicable installation instructions, installation practicesand national installation codes. These MDCs are intended for installation subject to approval by theAuthority Having Jurisdiction.

DIN 33899-3-2014工作場所暴露. 懸浮微粒監測用直讀式儀器的使用指南. 第3部分: 使用光度計評定空氣中懸浮微粒的濃度

This document describes the principle underlying evaluation of one or more health related aerosol fractions using photometers and details its limits and possibilities in the field of occupational hygiene.