個人眼防護裝置檢測

個人眼防護裝置檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 7247.14-2012激光產品的安全.第14部分：用戶指南

本標準給出了激光產品的安全使用佳指南，涉及所有由受激發射過程而產生光輻射的裝置、組件或系統（不包括發光二極管LEDs）。本標準能夠幫助相關人員識別危險、評估風險，適用于與激光安全有關的工作和負有安全職責的人員。

EN 12254-2010激光工作場所的屏蔽物.安全要求和試驗

This European Standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation.This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from: unintentional exposure to direct and/or diffuse laser radiation; a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment.This European Standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 μm) and 106 nm (1000 μm).This European Standard applies to the protection against laser radiation only.This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing.This European Standard gives guidance on how to select such screens. Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1) are not considered to be within the scope of the standard.

NF E60-601-2-2009機械的安全性.激光加工機械.第2部分:手持激光加工裝置的安全性要求

La présente partie de l'ISO 11553 spécifie les exigences applicables aux dispositifs de traitement laser, tels que définis dans l'ISO 11553-1, qui sont portatifs ou actionnés manuellement.L'objectif de la présente partie de l'ISO 11553 est d'attirer l'attention sur les phénomènes dangereux particuliers associés à l'utilisation de dispositifs de traitement laser portatifs et de prévenir les blessures aux personnes. Cela inclut les domaines de l'analyse des phénomènes dangereux et l'évaluation du risque ainsi que les mesures de protection.Les exigences relatives au phénomène dangereux généré par le bruit ne sont pas incluses dans la présente partie de l'ISO 11553. Ces exigences doivent être incluses dans un amendement ultérieur.La présente partie de l'ISO 11553 ne s'applique pas aux produits ou aux équipements à laser fabriqués exclusivement ou expressément pour des applications qui sont exclues du domaine d'application de l'ISO 11553-1.

DIN 23320-5-2014礦業用耐火防護服.礦井救生和毒氣救生人員用防護服.第5部分:防護頭盔

Flameproof protective clothing are used in the mining to protect against explosions, flames and other flame jets.This standard describes the additional requirements which are requested to protective hoods besides the safety requirements of the standard DIN 23320-1 out of DIN EN 469.

DIN EN 443-2008建筑和其它結構用防火頭盔

This European Standard specifies minimum requirements for firefighters' helmets protecting the upper headmainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and otherstructures.

DIN EN 706-2009農業機械.葡萄蔓翻轉機.安全

This standard specifies safety requirements and their verification for design and construction of self-propelled. mounted or semi-mounted vine shoot tipping machines. These mobile machines are used for trimming vineyard and other fruit tress that grow in the same way (trellising plants) and similar applications. Their cutting tools are either: -- High speed rotative blades (which cut by impact), or -- Rotative blade and counter blade (which cut by shearing), or -- Reciprocating cutting bar (which cuts by shearing). This standard does not apply to:-- Tipping machines for free standing fruit bushes. Walk-behind pedestrian controlled machines,-- Machines intended to be mounted on walk-behind pedestrian controlled machines,-- Hand-held machines.NOTE 1 Machines intended to be mounted on walk-behind pedestrian controlled machines will be dealt with in the nextrevision of this standard.This standard describes methods for the elimination or reduction of risks which need specific requirements forvine shoot tipping machines. It does not deal with general hazards, particularly general hazards related tomobility including those specific to self-propelled machines. These aspects will be dealt with in anotherstandard produced by CEN/TC 144 (see introduction).In addition, it specifies the type of information on safe working practices to be provided by the manufacturerThe list of significant hazards dealt with in this standard is given in annex A Annex A also indicates thehazards which have not been dealt with.NOTE 2 This standard does not deal with:-- the location and the operation of the controls: the adaptability and the setting up of mounted machines on tractors or other vehiclesEnvironmental aspects have not been considered in this standard.This standard applies primarily to machines which are manufactured after the date of issue of the standard.

DIN EN 1486-2008消防人員用防護衣服.專門防火用反射服的試驗方法和要求

This European Standard considers requirements for the protection of the whole body including head, hands andfeet. Clothing for head and feet according to this European Standard, however, may only provide sufficientprotection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs4.2 and 44 of this European Standard.This European Standard specifies test methods and minimum performance requirements for reflective protectiveclothing used in specialised fire-fighting.This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, toenable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the useof breathing apparatus.This European Standard only covers protective clothing that relies upon the ability of the outer material to reflectintense radiant heat. This type of reflective clothing may also be used for industrial applications involving highlevels of radiant heat.The reflective clothing specified in this European Standard is not covered in EN 469.

DIN EN 1731-2007人眼保護.網型護目和護面器

This European Standard specifies materials, design, performance requirements, test methods and marking requirements for mesh eye and face protectors.This standard is not applicable to eye and face protectors for use against liquid splash (including molten metal), hot solid risks, electrical hazards, infrared and ultra violet radiation.Mesh eye and face protectors for use in sports such as ice hockey and fencing are excluded.

DIN EN 12254-2012激光工作場所用屏蔽物. 安全性要求和試驗

This standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation. This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from unintentional exposure to direct and/or diffuse laser radiation; a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment. This standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 μm) and 106 nm (1000 μm). This standard applies to the protection against laser radiation only. This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing. This standard gives guidance on how to select such screens. Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1:2007) are not considered to be within the scope of the standard.

DIN EN 12942-2009呼吸保護裝置 采用全面罩、半面罩或四分之一面罩動力輔助過慮裝置 要求、試驗和標記

This European Standard specifies minimum requirements for power assisted respiratory protective deviceswhich incorporate a full face mask, half mask or a quarter mask together with gas, particle or combinedfilter(s) used as respiratory protective devices. It does not cover devices designed for use in circumstanceswhere there is or might be an oxygen deficiency (concentration in oxygen less than 17 % by volume). Also,it does not cover respiratory protective devices designed tor escape purposes.Laboratory tests and practical performance tests are included for the assessment of compliance with therequirements.

DIN EN 13567-2007防護服.擊劍運動員的手、胳膊、胸部、腹部、腿部、生殖器和面部用防護器.要求和試驗方法

This European Standard specifies the general requirements for ergonomics, sizing, coverage and performance of protective clothing and equipment for use in the sport of fencing. Requirements for the marking of clothing and equipment and the information to be supplied by the manufacturer are given. Test methods are described and performance levels are defined.

DIN-Fachbericht CEN/TR 15441-2006固體回收燃料.職業健康問題指南

The Technical Report considers aspects of occupational safety and health regarding production and trade of solid recovered fuels. Production, handling, storage, trade, sampling or analysis of SRF can be accompanied with certain health risks, not only by hazardous chemical products, but by biological agents, too. In addition, the risk of concomitance of hazardous waste in the input material cannot be excluded. These risks will be described in this Technical Report.

BS 6739-2009過程控制系統儀表的實施規范:安裝設計和實施

This British Standard gives recommendations for, and guidance on,the design for the installation of instrumentation of measurementand control systems in the process industry, and the implementationand commissioning of this installation. It is intended to be used asa manual of good practice on the site and also to assist those whodesign the installation.

BS 8467-2006防護服.化學、生物、放射和核(CBRN)試劑防護用個人保護裝置.分類、性能要求和試驗方法

To be read in conjunction with BS 8468

BS EN 402-2003呼吸保護裝置.逃逸用帶全面罩或口罩組件的滿足需氧量的獨立開路壓縮空氣呼吸裝置.要求、檢驗和標記

This European Standard specifies minimum requirements for lung governed demand self-contained open-circuit compressed air breathing apparatus for escape.\nThis European Standard does not apply to apparatus for work and rescue or to diving apparatus.\nLaboratory and practical performance tests are included for the assessment of compliance with the requirements.

BS EN 443-2008建筑和其它機構用防火頭盔

This European Standard specifies minimum requirements for firefighters' helmets protecting the upper headmainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and otherstructures.

BS EN 1486-2007消防人員防護服.特制防火專用反射服的檢驗方法和要求

This European Standard considers requirements for the protection of the whole body including head, hands andfeet. Clothing for head and feet according to this European Standard, however, may only provide sufficientprotection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs4.2 and 4.4 of this European Standard.This European Standard specifies test methods and minimum performance requirements for reflective protectiveclothing used in specialised fire-fighting.This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, toenable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the useof breathing apparatus.This European Standard only covers protective clothing that relies upon the ability of the outer material to reflectintense radiant heat. This type of reflective clothing may also be used for industrial applications involving highlevels of radiant heat.The reflective clothing specified in this European Standard is not covered in EN 469.

BS EN 12254-2010激光工作場所用屏蔽物.試驗和安全性要求

This European Standard specifies functional requirements and a product labelling applicable to temporary andpermanent passive guards (in the following called screens) for protection against laser radiation. Thisstandard includes test methods for testing functional performance and the specification of the userdocumentation to be supplied with the product. The screens are designed to protect the user from:? unintentional exposure to direct and/or diffuse laser radiation;? a time limited exposure to laser radiation, based on the functional requirements determined by riskassessment.This European Standard applies to supervised screens for installations in working places at which laserradiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectralrange between 180 nm (0,18 μm) and 106 nm (1 000 μm).This European Standard applies to the protection against laser radiation only. This standard does not apply toother hazards including hazards from secondary radiation that can arise during, for example, materialprocessing.This European Standard gives guidance on how to select such screens.Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to alaser system to form a laser product (according to EN 60825-1) are not considered to be within the scope ofthe standard.

BS EN 13567-2002+A1-2007防護服裝.擊劍者用手、臂、胸、腹部、腿、生殖器和臉部防護裝置.要求和試驗方法

This European Standard specifies the general requirements for ergonomics, sizing, coverage and performance ofprotective clothing and equipment for use in the sport of fencing. Requirements for the marking of clothing andequipment and the information to be supplied by the manufacturer are given. Test methods are described andperformance levels are defined.

BS EN 13794-2002呼吸保護裝置.逃生用獨立的封閉管路呼吸裝置.要求、試驗、標記

This European Standard specifies minimum requirements for self-contained closed-circuit breathing apparatus,chemical oxygen (KO2, NaClO3) type and compressed oxygen type, for escape (short: oxygen escape apparatus).This European Standard does not apply to apparatus for work and rescue and to diving apparatus.Laboratory and practical performance tests are included for the assessment of compliance with the requirements.