圓鋸床檢測

圓鋸床檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 6477-2008金屬切削機床.術語

本標準規定了金屬切削機床的一般術語、車床、銑床、鉆床、鏜床、磨床、齒輪加工機床、螺紋加工機床、刨床和插床、拉床、鋸床、組合機床及組合機床自動線、刻線機、管子加工機床、機床附件，運動、參數、零部件和加工方法的術語及其定義。本標準適用于一般用途的金屬切削機床（以下簡稱機床）。

GB 16454-2008金屬鋸床.安全防護技術條件

本標準針對金屬鋸床存在的主要危險，規定了消除危險和減少風險的基本安全要求和/或措施。本標準適用于一般用途的臥式帶鋸床、立式帶鋸床、圓鋸床和臥式弓鋸床（以下簡稱鋸床）。

HB/Z 99.4-1987飛機制造工藝工作導則.工藝文件編制工作條例

本條例規定了飛機工廠主要工藝文件的種類、編制要求、出版及更改方法。用于指導各飛機工廠工藝文件編制工作。　　本條例適用于各種新飛機（包括自行設計、實物測繪、仿制設計和改型設計的飛機）在研制、試制和批生產階段的工藝文件編制，而且主要適用于鈑金沖壓、機械加工、部件裝配、總裝試飛等各的工藝文件編制合作生產及研究機的工藝文件編制可參照實施。

JB/T 3364.1-2011圓鋸床.第1部分：型式與參數

JB/T 3364的本部分規定了圓鋸床的系列構成、用途及性能、參數。本部分適用于新設計的冷鋸金屬的臥式圓鋸床、擺式圓鋸床和立式圓鋸床。

JB/T 3364.2-2011圓鋸床.第2部分：精度檢驗

JB/T 3364的本部分規定了圓鋸床的幾何精度和工作精度的要求及檢驗方法。本部分適用于大圓鋸片直徑315 mm～2000 mm的臥式圓鋸床、擺式圓鋸床和立式圓鋸床。大圓鋸片直徑小于315 mm或大于2000 mm的圓鋸床可參照本部分使用。

JB/T 3364.3-2011圓鋸床.第3部分：技術條件

JB/T 3364的本部分規定了圓鋸床的制造與驗收的技術條件。本部分適用于大圓鋸片直徑為315 mm～2000 mm的臥式圓鋸床、擺式圓鋸床和立式圓鋸床。大圓鋸片直徑小于315 mm或大于2000 mm的圓鋸床可參照本部分使用。

JB/T 3364.4-2011圓鋸床.第4部分：主軸端部連接尺寸

JB/T 3364的本部分規定了圓鋸床主軸端部連接尺寸。本部分適用于新設計的冷鋸金屬的臥式圓鋸床、擺式圓鋸床和立式圓鋸床。

JB/T 13096.1-2017數控圓鋸床 第1部分:型式與參數

JB/T 13096的本部分規定了數控圓鋸床的系列構成、型式與參數。本部分適用于新設計的冷鋸金屬數控圓鋸床。

JB/T 13096.2-2017數控圓鋸床 第2部分:數控臥式圓鋸床 精度檢驗

JB/T 13096的本部分規定了數控臥式圓鋸床的幾何精度和工作精度的要求及檢驗方法。本部分適用于大圓鋸片直徑為450 mm~1 800 mm、大鋸削規格為160 mm~600 mm的數控臥式圓鋸床(以下簡稱機床)。其他規格的數控臥式圓鋸床可參照本部分使用。

JB/T 13096.3-2017數控圓鋸床 第3部分:數控臥式圓鋸床 技術條件

JB/T 13096的本部分規定了數控臥式圓鋸床制造與驗收的技術要求。本部分適用于大圓據片直徑為450 mm~1 800 mm、大據削規格為160 mm~600 mm的數控臥式圓鋸床(以下簡稱機床)。其他規格的數控臥式圓鋸床可參照執行。

JB/T 13096.4-2017數控圓鋸床 第4部分:數控擺式圓鋸床 精度檢驗

JB/T 13096的本部分規定了數控擺式圓鋸床的幾何精度、位置精度和工作精度的要求及檢驗方法。本部分適用于大圓鋸片直徑為250 mm~800 mm、大鋸削規格為50 mm~260 mm的數控擺式圓鋸床(以下簡稱機床)。其他規格的數控擺式圓鋸床可參照本部分執行。

JB/T 13096.5-2017數控圓鋸床 第5部分:數控擺式圓鋸床 技術條件

JB/T 13096的本部分規定了數控擺式圓鋸床制造與驗收的技術要求。本部分適用于大圓鋸片直徑為250 mm~800 mm、大鋸削規格為50 mm~260 mm的數控擺式圓鋸床(以下簡稱機床)。其他規格的數控擺式圓鋸床可參照本部分執行。

JB/T 14480.1-2023數控旋轉圓鋸床 第1部分：精度檢驗

本文件規定了數控旋轉圓鋸床的軸線代號與命名、一般要求、幾何精度檢驗、數控軸線的定位精度與重復定位精度檢驗及工作精度檢驗。\r本文件適用于大圓鋸片直徑250mm～800mm，大鋸削規格50mm～200mm的數控旋轉圓鋸床精度的檢驗活動。

JB/T 14480.2-2023數控旋轉圓鋸床 第2部分：技術規范

本文件規定了數控旋轉圓鋸床的一般要求、附件和工具、加工與裝配質量、機床噪聲、機床安全衛生、機床空運轉試驗、機床負荷試驗及機床精度檢驗。\r本文件適用于大圓鋸片直徑250mm～800mm，大鋸削規格50mm～260mm的數控旋轉圓鋸床的制造。

EN 12267+A1-2010食品加工機械.圓鋸床.安全和衛生要求

This European Standard specifies requirements for the design and manufacturing of circular saw machines (see Figures 1 and 2). The machines covered by this European Standard are used to cut bone and meat. The circular saw machines covered by this European Standard do not include circular saw machines for processing of wood and similar materials and the requirements of EN 1870-1 do not apply. Circular saw machines for domestic use are not included in this European Standard. This European Standard applies only to machines which are manufactured after the date of issue of this European Standard. This European Standard covers the following types of machines: Circular saw machines with a feed table and a fixed product pusher The distance \"A\" from the floor to the top surface of the feed table is from 800 mm to 1050 mm. The saw blade diameter is between 350 mm and 400 mm (see Figure 1). Circular saw machines installed in a cutting line (e. g. conveyor belt or roller conveyor), e. g. with a protective component which can be lifted on the feed and discharge side. The saw blade diameter is between 350 mm and 400 mm (see Figure 2). Key 12345678910111213 Product pusher Handle Feed table Interlocking switch for feed table ON / OFF switch Chip pan Operator side Protective hood Hinge Saw blade 350 mm - 400 mm diameter Interlocking switch for chip pan Machine rack Locking device 12345 Protective hood Roller conveyor or belt conveyor Feed side Casing Chip pan Figure 1 - Circular saw machine with machine base Figure 2 - Circular saw machine in cutting line Circular saw machines comprise a machine base, a fixed, foldable feed table, a product pusher, a protective hood which can be lifted, a saw blade, a drive and electrical components, depending on machine type. Circular saw machines with a machine base can be wheel-mounted (see Figure 1). This European Standard deals with all significant hazards, hazardous situations and events relevant to circular saw machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards which can arise during commissioning, operation, cleaning, use, maintenance and decommissioning of the machine. On floor-type circular saw machines (see Figure 3) the product to be cut is placed by hand onto the feed table and pushed against the cutting zone of the saw blade by means of the product pusher and sawed. On circular saw machines which are installed in a cutting line (see Figure 4) the product to be cut is pushed by hand via the conveyor belt or roller conveyor against the cutting zone of the saw blade and sawed.

EN 12267-2003食品加工機械.圓鋸床.安全和衛生要求.包含修改件A1-2010

This European Standard specifies requirements for the design and manufacturing of circular saw machines (see Figures 1 and 2). The machines covered byThis European Standard are used to cut bone and meat. The circular saw machines covered byThis European Standard do not include circular saw machines for processing of wood and similar materials and the requirements of EN 1870-1 do not apply. Circular saw machines for domestic use are not included inThis European Standard.This European Standard applies only to machines which are manufactured after the date of issue of this European Standard.This European Standard covers the following types of machines: Circular saw machines with a feed table and a fixed product pusher The distance \"A\" from the floor to the top surface of the feed table is from 800 mm to 1050 mm. The saw blade diameter is between 350 mm and 400 mm (see Figure 1). Circular saw machines installed in a cutting line (e. g. conveyor belt or roller conveyor), e. g. with a protective component which can be lifted on the feed and discharge side. The saw blade diameter is between 350 mm and 400 mm (see Figure 2). Key 12345678910111213 Product pusher Handle Feed table Interlocking switch for feed table ON / OFF switch Chip pan Operator side Protective hood Hinge Saw blade 350 mm-400 mm diameter Interlocking switch for chip pan Machine rack Locking device 12345 Protective hood Roller conveyor or belt conveyor Feed side Casing Chip pan Figure 1-Circular saw machine with machine base Figure 2-Circular saw machine in cutting line Circular saw machines comprise a machine base, a fixed, foldable feed table, a product pusher, a protective hood which can be lifted, a saw blade, a drive and electrical components, depending on machine type. Circular saw machines with a machine base can be wheel-mounted (see Figure 1).This European Standard deals with all significant hazards, hazardous situations and events relevant to circular saw machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard deals with the hazards which can arise during commissioning, operation, cleaning, use, maintenance and decommissioning of the machine. On floor-type circular saw machines (see Figure 3) the product to be cut is placed by hand onto the feed table and pushed against the cutting zone of the saw blade by means of the product pusher and sawed. On circular saw machines which are installed in a cutting line (see Figure 4) the product to be cut is pushed by hand via the conveyor belt or roller conveyor against the cutting zone of the saw blade and sawed.

NF E64-607-9-2012木工機械的安全性.圓形電鋸.第9部分:手工裝載和/或卸載的整體送料橫切用雙刃鋸條圓鋸床

La présente Norme européenne traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu'énumérés à l'Article 4, applicables aux machines à scier à deux lames de scie circulaires, pour tron?onnage, à avance mécanisée et à chargement et/ou déchargement manuels, ci-après désignées \"machines\". Ce sont des machines con?ues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliages légers stratifiés, lorsqu'elles sont utilisées normalement et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible.Le présent document n'est pas applicable aux : machines con?ues pour le tron?onnage de grumes ; tron?onneuses à deux lames à coupe ascendante.Le présent document n'est pas applicable aux machines fabriquées avant la date de sa publication comme norme EN.

TS EN 12267+A1-2013食品加工機械. 圓鋸床. 安全和衛生要求

This European Standard specifies requirements for the design and manufacturing of circular saw machines (see Figures 1 and 2). The machines covered by this European Standard are used to cut bone and meat. The circular saw machines covered by this European Standard do not include circular saw machines for processing of wood and similar materials and the requirements of EN 1870-1 do not apply. Circular saw machines for domestic use are not included in this European Standard. This European Standard applies only to machines which are manufactured after the date of issue of this European Standard. This European Standard covers the following types of machines: Circular saw machines with a feed table and a fixed product pusher - The distance \"A\" from the floor to the top surface of the feed table is from 800 mm to 1050 mm. The saw blade diameter is between 350 mm and 400 mm (see Figure 1). - Circular saw machines installed in a cutting line (e.g. conveyor belt or roller conveyor), e.g. with a protective component which can be lifted on the feed and discharge side. The saw blade diameter is between 350 mm and 400 mm (see Figure 2).