農林機械通用要求檢測

農林機械通用要求檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 15370.3-2012農業拖拉機 通用技術條件 第3部分：130kW以上輪式拖拉機

GB/T 15370的本部分規定了 130 kW以上農業輪式拖拉機的技術要求、試驗方法、檢驗規則、交貨、標志、運輸和貯存、本部分適用于130 kW以上農業輪式拖拉機(以下簡稱拖拉機)、

GB/T 17126.1-2009農業拖拉機和機械.動力輸出萬向節傳動軸和動力輸入連接裝置.第1部分:通用制造和安全要求

GB/T 17126的本部分規定了農業拖拉機或自走式機械的動力輸出萬向節傳動軸和機具的動力輸入連接裝置。本部分確立了在給定制造和安全要求下，動力輸出萬向節傳動軸靜態和動態扭轉強度的測定方法。本部分適用于動力輸出萬向節傳動軸和至少通過兩個軸承與傳動軸機械連接的防護罩。本部分不適用于通過設置位置進行防護的動力輸出萬向節傳動軸，也不適用于逆傳限制的裝置和轉矩限制器機械性的評價。本部分未考慮環境方面的因素。

GB/T 24688-2009動物防疫消毒機.試驗方法

本標準規定了動物防疫消毒機的試驗條件和試驗方法。本標準適用于配套液力泵及軸流式風機的噴霧式動物防疫消毒機。

GB/T 39515.1-2020農林機械 噴霧機的環境要求 第1部分:通用要求

GB/T 39515的本部分規定了噴霧機(見ISO 5681定義)的設計和性能通用要求，以盡量減少在使用噴霧機過程中潛在的環境污染風險，包括制造商能夠預見的風險。本部分還規定了識別噴霧機及其某些部件的要求以及使用說明書內容的低要求。本部分適用于農業、園藝、林業等領域背負式噴霧器除外的全部類型噴霧機。本部分與GB/T 39515的其他每個部分一起使用，其他部分規定了特定類型噴霧機的具體要求(參見附錄A)。本部分不包含安全方面的內容，安全方面的要求見ISO 4254-6。本部分不適用于其發布日期之前生產的噴霧機。

LY/T 1041-2018林業機械 苗圃筑床機

本標準規定了苗圃筑床機(以下簡稱“筑床機”)的術語和定義、型號編制方法、基本參數、技術要求及試驗方法、標志、包裝、使用說明書、運輸和貯存。本標準適用于以拖拉機或苗圃通用底盤為配套動力的懸掛式連接的苗圃筑床機。

LY/T 3021-2018園林機械 以鋰離子電池為動力源的便攜式割灌機和割草機

本標準規定了以鋰離子電池為動力源的便攜式割灌機和割草機(以下簡稱“鋰電割灌機”和“鋰電割草機”)的術語和定義、型號編制方法、基本參數、技術要求及試驗方法、標志、使用說明書、包裝、運輸、貯存和處理。本標準適用于以標稱電壓不大于直流75 V可充電鋰離子電池包(電池組)供電的鋰電割灌機和鋰電割草機。本標準不適用于：——剪刀型電動割灌機和電動割草機；——自進型電動割灌機和電動割草機；——切割器件控制器件與切割頭之間小于600 mm距離的電動割灌機和電動割草機；——以使用者自行安裝的通用電池包或電池組為動力源的電動割灌機和割草機；——其他非鋰離子電池為動力源的電動割灌機和電動割草機。

JB/T 11922-2014智能化奶牛個體精料變量補飼機

本標準規定了智能化奶牛個體精料變量補飼機的術語和定義、型式與基本參數、技術要求、試驗方法、檢驗規則、標志、包裝、運輸與貯存。本標準適用于置放在奶牛運動場或牛舍內的固定式智能化奶牛個體精料變量補飼機(以下簡稱補飼機)。

JB/T 12451-2015噴霧式動物防疫消毒機 技術條件

本標準規定了噴霧式動物防疫消毒機的型號標記、技術要求、試驗方法、檢驗規則以及標牌、包裝、運輸和貯存。本標準適用于配套液力泵及軸流式風機的噴霧式動物防疫消毒機(以下簡稱防疫消毒機)。

DIN EN 609-1-2017農林機械.劈木機的安全性.第1部分:楔形劈木機;德文版本EN 609-1-2017

This European Standard specifies safety requirements, and their verification for the design and construction of horizontal and vertical wedge splitters, designed to be used by one operator for splitting wood (short log and long log), irrespective of the nature of the power source used. The splitting process of a wedge splitter is designed as a single operatored control station. However it is possible, that more than one operator are working, e. g. loading and/or unloading the splitter. On a dual purpose circular saw for firewood/log splitting machine only the log splitter part of the machine is covered by this standard. For circular saws for firewood see EN 1870-6.This standard describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.

DIN EN 709-2011農業和林業機械.帶有裝配好的旋轉式中耕機的側面操縱拖拉機,電動鋤具,帶驅動輪的電動鋤具.安全;德文版本EN 709-1997+A4-2009

This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard.

DIN EN ISO 4254-10-2011農業機械.安全性.第10部分:旋轉式攤草機和摟草機(ISO 4254-10-2009).德文版本EN ISO 4254-10-2009 + AC-2010

This part of ISO 4254, to be used together with ISO 4254-1, specifies safety requirements and their verification for the design and construction of rotary tedders, rotary tedder-rakes, including rotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted, semi-mounted, trailed and self-propelled. In additon, it specifies the type of information on safe working practies, including residual risks, to be provided by the manufacturer.

DIN EN ISO 4254-11-2011農業機械.安全性.第11部分:撿拾打捆機(ISO 4254-11-2010).德文版本EN ISO 4254-11-2010

This part of ISO 4254, intended to be used together with ISO 4254-1, specifies safety requirements and their verification for the design and construction of self-propelled and trailed pick-up balers independent of the shape or size of the bales formed. In addition, this document specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

DIN EN ISO 16230-1-2016農業機械和拖拉機.高壓電氣和電子元件和系統的安全性.第1部分:通用要求(ISO 16230-1-2015).德文版本EN ISO 16230-1-2015

The standard specifies safety requirements for high voltage components and systems of agricultural machinery and tractors.

BS EN ISO 4254-10-2009農業機械.安全性.旋轉攤草機和摟草機

This part of ISO 4254, to be used together with ISO 4254-1, specifies the safety requirements and theirverification for the design and construction of rotary tedders, rotary rakes and rotary tedder–rakes, includingrotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted,semi-mounted, trailed or self-propelled. In addition, it specifies the type of information on safe workingpractices, including residual risks, to be provided by the manufacturer.This part of ISO 4254 is not applicable to:a) machines with ground-driven tines or ground-wheel–driven tines (e.g. sunflower rakes);b) parallel bar rakes;c) chain or endless belt type rakes;d) pedestrian-controlled tedders and rakes;e) machines equipped with a pick-up device.When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1, therequirements of this part of ISO 4254 take precedence over the requirements of ISO 4254-1 for machines thathave been designed and built according to the provisions of this part of ISO 4254.