電動轉向管柱總成檢測

電動轉向管柱總成檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 8423.2-2018石油天然氣工業術語 第2部分:工程技術

GB/T 8423的本部分界定了石油天然氣工業工程技術服務專用的術語及定義。本部分適用于石油天然氣工程技術服務領域，石油天然氣工業其他領域可參照使用。

GB/T 21411.2-2009石油天然氣工業井下設備.人工舉升用螺桿泵系統.第2部分:地面驅動裝置

本部分對石油天然氣工業使用的螺桿泵地面驅動裝置的設計、設計驗證和有效性、制造和數據控制、性能評價和維修等方面提出了要求。本部分適用于滿足地面驅動裝置定義的產品。同時，附錄提供了剎車系統的選擇、安裝、操作以及抽油桿的選擇和使用等信息。除了整體設計，本部分不涵蓋以下設備:底部驅動系統、抽油桿、光桿卡瓦、密封盒、電控設備、儀表、外部電源轉換設備、輔助設備(如皮帶、皮帶輪和設備護罩)。其他標準里可能會覆蓋這些設備的內容。

GB/T 21412.1-2010石油天然氣工業 水下生產系統的設計與操作 第1部分：一般要求和推薦做法

本部分制定了整套水下生產系統從設計到廢棄各個階段的一般要求和推薦做法，作為一個綱領性文件用于指導和制定涉及到水下生產系統各個組成部分更為詳細要求的子系統標準。同時，對于子系統標準內未包括的某些部分，如系統設計、結構、管匯、吊裝設備、顏色和標記等，也給出了較為詳細的要求。對那些應用范圍有限的特種設備，如密閉在干式艙中的組合式采油樹、采油樹和管匯等，這里未做專門討論，但本部分中的相關條款同樣適用于這類設備。

GB/T 21412.4-2013石油天然氣工業 水下生產系統的設計與操作 第4部分:水下井口裝置和采油樹設備

GB/T 21412的本部分規定了水下井口裝置、泥線井口裝置、鉆通泥線井口裝置以及水下立式和臥式采油樹規范,以及設備搬運、試驗和安裝所需的相關工具。還規定了獨立的分總成(用來建造完整的水下采油樹總成)和完整的水下采油樹總成的設計、材料、焊接、質量控制(包括工廠驗收試驗)、標志、貯存和運輸。用戶有責任確保水下設備滿足其安裝地所屬政府法規的任何附加要求。這不在本部分的范圍之內。當適用時,本部分也可應用于衛星井、叢式井和用于基盤式的多層完井等方面的設備。本部分適用于下列設備:a)水下采油樹--采油樹連接裝置和油管懸掛器;--閥、閥組和閥驅動器;--節流閥和節流閥驅動器;--排放閥、測試閥和隔離閥;--TFLY形四通;--再入接口;--采油樹帽;--采油樹管路;--采油樹導向架;--采油樹送人工具;--采油樹帽送入工具;--采油樹安裝的出油管線或控制管纜連接裝置;--油管頭和油管頭連接裝置;--出油管線底座和送入回收工具;--采油樹安裝的控制裝置接口(儀器、傳感器、液壓管或管配件、電氣控制裝置電纜和附件);b)水下井口裝置--導管頭;--井口頭;--套管懸掛器;--密封總成;--導向基座;--孔保護裝置和耐磨襯套;--防腐帽;c)泥線懸掛系統--井口裝置;--送入工具;--套管懸掛器;--套管懸掛器送入工具;--水下完井回接工具;--泥線井口裝置水下完井異徑連接裝置;--油管頭;--防腐帽;d)鉆通泥線懸掛系統--導管頭;--表層套管懸掛器;--井口頭;--套管懸掛器;--環空密封總成;--孔保護裝置和耐磨襯套;

GB/T 28911-2012石油天然氣鉆井工程術語

本標準規定了石油天然氣鉆井工程專用的術語。本標準適用于石油天然氣鉆井工程領域，也適用于石油天然氣工業的其他領域。

GA 1006-2012警用巡邏車

本標準規定了警用巡邏車的術語和定義、分類和代號、技術要求、試驗方法、檢驗規則及標志、運輸和貯存。本標準適用于以內燃機為動力、座位數不超過九座的乘用車改進的警用巡邏車。以新能源汽車改進的警用巡邏車可參照使用。

JT/T 795-2011事故汽車修復技術規范

本標準規定了事故汽車修復的作業流程、工藝要求、配件修換原則及質量保證。本標準適用于汽車事故損傷的修復。

SY/T 0439-2012石油天然氣工程建設基本術語

本標準適用于油田、氣田、輸油管道、輸氣管道、油庫、儲氣庫、液化天然氣等工程設計。

TB 10014-2012鐵路工程地質鉆探規程

本規程適用于鐵路工程地質、水文地質鉆探及物探測井、孔內測試鉆孔的鉆探工作。

DB11/T 137-2008汽車小修竣工出廠技術條件

本標準規定了汽車小修竣工出廠的技術要求和質量保證。本標準適用于小修竣工出廠的在用汽車。三輪汽車、專用作業車、氣體燃料汽車、兩用燃料汽車、雙燃料汽車和電動汽車可參照執行。

EN 81-31-2010電梯制造與安裝安全規范.僅貨運電梯.第31部分:僅運送貨物的電梯

This European Standard applies to new electric accessible goods only lifts with traction or positive drive and new hydraulic accessible goods only lifts; permanently installed in restricted areas and/or only used by authorised and instructed persons (users); serving fixed and permanent landing levels; having a load carrying unit made of a single load carrying area; designed for the transportation of goods only; moving along a fixed path (e. g. scissor lifts; lifts with guide rails) and inclined not more than 15° to the vertical; with rated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and not intended to move persons.This standard deals with all significant hazards; hazardous situations and events with the exception of those listed in below; relevant to accessible goods only lifts; when they are used as intended and under the conditions foreseen by the manufacturer.

EN ISO 13628-1-2005石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和建議 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

DIN EN ISO 13628-4-2011石油和天然氣工業.海底開采系統的設計和操作.第4部分:海底井口裝置和采油樹設備(ISO 13628-4-2010);英文版本EN ISO 13628-4-2010,僅在CD-ROM上

This part of ISO 13628 provides specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees. It specifies the associated tooling necessary to handle, test and install the equipment. It also specifies the areas of design, material, welding, quality control (including factory acceptance testing), marking, storing and shipping for both individual sub-assemblies (used to build complete subsea tree assemblies) and complete subsea tree assemblies.The user is responsible for ensuring subsea equipment meets any additional requirements of governmental regulations for the country in which it is installed. This is outside the scope of this part of ISO 13628.Where applicable, this part of ISO 13628 can also be used for equipment on satellite, cluster arrangements and multiple well template applications.

DIN EN ISO 13628-7-2007石油和天然氣工業.水下采油系統的設計和操作.第7部分:完井/修井提升管系統

This standard gives requirements and recommendations for the design, analysis, materials, fabrication testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.#,,#

DIN EN ISO 14224-2017石油、石化產品和天然氣工業.設備可靠性和維修數據的采集與交換(ISO 14224-2016,修正版2016-10-01);英文版本EN ISO 14224-2016,只在CD-ROM

This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a \"reliability language\" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a \"reliability thesaurus\" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data-collection practices facilitates the exchange of information between parties, e. g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. This standard also provides framework and guideline for establishing performance objectives and requirements for equipment reliability and availability performance. Annex A contains a summary of equipment that is covered by this International Standard. - This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues: - data requirements for the categories of data to be collected for use in various analysis methodologies; - standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors. The following main categories of data are to be collected: - equipment data, e. g. equipment taxonomy, equipment attributes; - failure data, e. g. failure cause,

DIN EN ISO 15136-1-2010石油和天然氣工業用下降孔設備.人工升降機用推進腔體泵系統. 第1部分:泵(ISO 15136-1-2009).英文版本EN ISO 15136-1-2009

This document provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. This part of ISO 15136 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered. This International Standard includes normative annexes that establish requirements for: characterization and testing of stator elastomer material, design validation and functional evaluation. Additionally, informative annexes provide information for PCP elastomer selection and testing, installation, startup and operation guidelines, equipment selection and application guidelines, functional specification form, used pump evaluation, drive string selection and use, repair and reconditioning procedures and auxiliary equipment. Equipment not covered by the requirements of this part of ISO 15136 includes: bottom drive systems except for the PCP components, drive string components and auxiliary equipment such as tag bars, gas separators and torque anchors.

BS EN 81-31-2010電梯的建造和安裝用安全性規程.僅供貨物運輸的電梯.僅用于貨物進入的電梯

This European Standard applies to new electric accessible goods only lifts with traction or positivedrive and new hydraulic accessible goods only lifts, permanently installed in restricted areas and/or onlyused by authorised and instructed persons (users), serving fixed and permanent landing levels, having aload carrying unit made of a single load carrying area, designed for the transportation of goods only, movingalong a fixed path (e.g. scissor lifts, lifts with guide rails) and inclined not more than 15° to the vertical, withrated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and notintended to move persons.This standard deals with all significant hazards, hazardous situations and events with the exception of thoselisted in 1.3 below, relevant to accessible goods only lifts, when they are used as intended and under theconditions foreseen by the manufacturer (see Clause 4).

BS EN ISO 13628-1-2005+A1-2010石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和推薦規范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.