薄型屋面和墻覆層檢測

薄型屋面和墻覆層檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 16662-2008建筑給水排水設備器材術語

本標準規定了建筑給水排水設備和器材，包括衛生器具，水嘴，加壓、調節和貯存設備，加熱貯熱設備，地漏，檢查井，建筑水處理設備，游泳池、游樂池設備，冷卻設備，水景設備，雨水利用設備，管材，管件，閥門，計量、檢測儀表等方面的專用術語。本標準適用于建筑給水排水設備和器材的專用術語。

GB/T 19686-2015建筑用巖棉絕熱制品

本標準規定了建筑領域用巖棉絕熱制品（以下簡稱巖棉制品）的適用范圍、分類和標記、要求、試驗方法、檢驗規則、標志、包裝、運輸及貯存。本標準適用于在建筑物圍護結構上使用的巖棉制品，也適用于在具有保溫功能的建筑構件和地板使用的巖棉制品。本標準不適用于外墻外保溫薄抹灰系統使用的巖棉制品。

GB/T 21714.3-2015雷電防護 第3部分:建筑物的物理損壞和生命危險

GB/T 21714的本部分提出了以下要求：通過采用雷電防護裝置(LPS)來防止建筑物的物理損壞、避免LPS附近因接觸和跨步電壓而引起的生命危險。本部分適用于：a) 任意高度建筑物的LPS設計、安裝、檢查和維護；b) 對接觸和跨步電壓引起的人身危害提供保護措施。

GB 50303-2015建筑電氣工程施工質量驗收規范

本規范適用于電壓等級為35kV及以下建筑電氣安裝工程的施工質量驗收。

GB 50922-2013天線工程技術規范

本規范適用于地面通信天線、衛星電視接收天線、微波接力天線及移動通信基站天線工程的設計、安裝與驗收。

GB 51205-2016精對苯二甲酸工廠設計規范

本規范適用于精對苯二甲酸工廠生產裝置和輔助生產設施的新建、擴建和改建工程的設計，不包括為精對苯二甲酸工廠服務的公用工程設施和辦公設施。

CECS 212-2006預應力鋼結構技術規程

本規程適用于工業與民用建筑和構筑物中預應力平面和空間鋼結構等承重體系的設計、施工及維護。對于預應力玻璃幕墻和索膜結構以及其他預應力鋼結構（橋梁結構、塔桅結構、冷彎薄壁型鋼結構等）等，本規程應與有關標準配套使用。

CJJ 94-2009城鎮燃氣室內工程施工與質量驗收規范

為統一城鎮燃氣室內工程的施工與質量驗收，保證城鎮燃氣室內工程的施工質量，確保安全供氣，制定本規范。本規范適用于供氣壓小于或等于0.8MPa（表壓）的新建、擴建和改建的城鎮居民住宅、商業用戶、燃氣鍋爐房（不含鍋爐本體）、實驗室、工業企業（不含用氣設備）等用戶室內燃氣管道和用氣設備安裝的施工與質量驗收。

JGJ 227-2011低層冷彎薄壁型鋼房屋建筑技術規程

本規程適用于以冷彎薄壁型鋼為主要承重構件，層數不大于3層，檐口高度不大于12m的低層房屋建筑的設計、施工及驗收。

JGJ/T 261-2011外墻內保溫工程技術規程

本規程適用于以混凝土或砌體為基層墻體的新建、擴建和改建居住建筑外墻內保溫工程的設計、施工及驗收。

DB11/T 302-2005燃氣輸配工程設計施工驗收技術規定

本規定適用于北京市居民生活、商業、工業企業、采暖通風和空調等用燃氣作燃料的新建、擴建\r或改建的燃氣輸配工程的設計、施工及驗收

ASTM C1528-2002外用尺寸石選則的標準指南

1.1 This guide is intended to be used by architects, engineers, specifiers, contractors, and material suppliers who design, select, specify, install, purchase, fabricate, or supply natural stone products for construction applications.1.2 Consensus Standard8212;This guide is an industry consensus standard drafted in a cooperative effort among engineers, architects, geologists, producers, and installers of natural stone.

EN 14015-2004在室溫及高于環境溫度液體儲存用平底,立式,圓柱形,現場建造的地面上可焊鋼罐的設計和制造規范

This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A).

DIN 4102-4-2016建筑材料和建筑構件的耐火性能.概要和分級的建筑材料、構件和特種構件的應用

This document contains catagorized results of fire tests of buildings materials, components and construction types. Due to the assignment to the classes of building materials according to DIN 4102 part 1 and the fire resistance classes of the other parts of DIN 4102 respectively, further fire tests for the verification of usability required by the building regulations are not necessary.

DIN 4109-32-2016建筑物隔聲. 第32部分: 隔聲驗證使用數據 (組件目錄). 實心結構

This standard contains acoustic data for elements and designs for solid structures intended for use in the methods of calculation that are specified in DIN 4109-2 and are used in the verifications according to DIN 4109-1, without conducting acoustic suitability tests.

DIN EN 10079-2007鋼鐵制品的定義

This European Standard defines terms for steel products according to:a)shape and dimensions;and b)appearance and surface condition.NOTE 1 Although the products are generally defined independently of their end uses or manufacturing processes,it bas sometimes been necessary to make reference to these criteria.NOTE 2 All dimensions given in this European Standard are nominal.

DIN EN ISO 13706-2012石油、石化和天然氣工業.風冷熱交換器

This International Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This International Standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.

BS 6100-6-2008建筑與土木工程.詞匯.結構部件

This part of BS 6100 defines terms for buildings and civil engineeringworks, including:a) external works;b) walls and cladding;c) roofs and roofing;d) floors and ceilings;e) stairs and circulation elements;f) doors, windows and openings;g) jointing products;h) builders’ hardware and accessories;i) finishes;j) signs and signing.This standard does not define terms for structural membersand foundations (covered in BS 6100-4) or building services(covered in BS 6100-8).

BS PD CEN/TR 13833-2003施工企業的資格鑒定

This European Standard specifies the definitions, procedures, criteria and their assessment as well as therespective documentation related to a system of qualification of construction enterprises.