自清潔涂料檢測

自清潔涂料檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 30191-2013外墻光催化自潔涂覆材料

本標準規定了外墻光催化自潔涂覆材料的術語和定義、分類和標記、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于施涂于外墻涂料表面在光催化作用下具有親水性自潔功能的涂覆材料。

GB/T 31815-2015建筑外表面用自清潔涂料

本標準規定了建筑外表面用自清潔涂料產品的術語和定義、要求、試驗方法、檢驗規則、標志、包裝和貯存等。本標準適用于通過利用親水、疏水、微粉化、光催化等機理改變涂層的表面特性，在雨水、陽光等自然因素的作用下，無需人工擦洗，就能將涂層表面灰塵、油污等污染物去除的一類功能性涂料，涂料類型包括水性、溶劑型以及其他適用的類型。該涂料主要用于建筑物外表面的裝飾和保護。橋梁、貯罐等表面用自清潔涂料也可參考本標準。

GB 50688-2011城市道路交通設施設計規范

為維護城市道路交通運行有序、安全、暢通及低公害，統一城市道路交通設施設計的技術標準，指導工程建設，達到城市道路交通設施功能全面、技術先進、安全實用、經濟合理等目的，制定本規范。本規范適用于城市新建、改建、擴建道路的交通設施設計。城市道路交通設施應包括交通標志、交通標線、防護設施、交通信號燈、交通監控系統、服務設施、道路照明及變配電和管理處所及設備等。城市道路交通設施設計應依據道路性質、沿線環境以及交通流特性等進行，符合項目所在地區相關規劃、道路總體設計和節能環保的要求。城巿道路交通設施設計中所采用的設計車輛外廓尺寸、汽車荷載等應符合現行標準《道路車輛外廓尺寸、軸荷及質量限 值》GB 1589的有關規定。城市道路交通設施應與道路主體工程同步設計，按總體設計、分期實施的原則進行設計。與主體工程相關的基礎工程、管道 等應在主體工程實施時一并預留或預埋。城巿道路交通設施設計除應符合本規范外，尚應符合現行有關標準的規定。

GB 50825-2013鋼鐵廠加熱爐工程質量驗收規范

1.0.1為了提高鋼鐵廠加熱爐工程質量,統一鋼鐵廠加熱爐工程質量驗收標準,確保加熱爐達到所需性能,制定本規范。1.0.2本規范適用于鋼鐵廠新建、改建、擴建推鋼式加熱爐、步進梁式加熱爐、步進底式加熱爐、環形加熱爐、臺車式加熱爐等爐型的加熱爐工程。1.0.3鋼鐵廠加熱爐工程質量的驗收除應執行本規范的規定外,尚應符合現行有關標準的規定。

GB/Z 26210-2010室內電氣照明系統的維護

本指導性技術文件對各種影響系數進行了探討，在實用解決方案的基礎上給出相關數據，這些數據使得各種系統、建筑物和場地上的維護系數便于求導。求出的維護系數應適用于照明線路圖計算用的所有公式，如：照度、區域或各點上的亮度。同時給出了估算經濟維護周期的方法，給出了清潔技術方面的建議。本指導性技術文件還提供了典型數據的有限選擇，使得計算方法能得到合理解釋。然而，為充分利用照明產品連續發展的有利條件，應從制造商那里獲取新的數據。

DL/T 5317-2014水電水利工程聚脲涂層施工技術規程

本規程適用于水電水利工程混凝土和砂漿表面的防滲、抗沖磨保護、耐久性防護及表面裝飾等的聚脲涂層。本規程規定了水電水利工程涂覆聚脲涂層的材料、施工、質量控制、安全與環保等技術要求。

UL 991-2004固體器件安全控制裝置的試驗

1.1 These requirements apply to controls that employ solid-state devices and are intended for specified safety-related protective functions. 1.2 These requirements address the potential risks unique to the electronic nature of a control. Equipment or components employing an electronic feature shall also comply with the basic construction and performance requirements contained in the applicable end-product or component standard. These requirements are intended to supplement applicable end-product or component standards and are not intended to serve as the sole basis for investigating the risks of fire, electric shock, or injury to persons associated with a control. 1.3 These requirements do not cover controls covered by end-product standards in which an electronic control investigation is specified. 1.4 Sections 9 - 22 contain standardized test methods for investigating the performance of an electronic control when subjected to particular environmental stresses. The suitability of each test to a given control shall be determined by the end-product standard(s). Determination shall include an assessment of: a) Whether the control will be exposed to a particular environmental stress in its application, and b) Whether the response of the control to a particular environmental stress is relevant to its intended safety-related protective function in its application.

ASTM B915-2001(2007)自清洗爐覆層的靜態耐熱性測量用標準試驗方法

This test method is intended for testing the porcelain enamel finish on oven parts of self-cleaning ranges. The numerical values and visual evaluation derived by this test method are used to measure differences in heat resistant characteristics between enamel formulas intended to meet oven manufacturer specifications.1.1 This test method covers the procedure for the qualitative and quantitative evaluation of static heat effects on porcelain enamel coatings.1.2 This test method is adaptable to various temperatures and times, since the requirements in the porcelain enameling industry differ between manufacturers.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM B915-2001(2013)e1用于測量自清潔爐涂料靜態耐熱性的標準試驗方法

4.1x00a0;This test method is intended for testing the porcelain enamel finish on oven parts of self-cleaning ranges. 4.2x00a0;The numerical values and visual evaluation derived by this test method are used to measure differences in heat resistant characteristics between enamel formulas intended to meet oven manufacturer specifications. 1.1x00a0;This test method covers the procedure for the qualitative and quantitative evaluation of static heat effects on porcelain enamel coatings. 1.2x00a0;This test method is adaptable to various temperatures and times, since the requirements in the porcelain enameling industry differ between manufacturers. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM B915-2001(2017)測量自潔式烘箱涂層靜態隔熱能力的標準試驗方法

4.1x00a0;This test method is intended for testing the porcelain enamel finish on oven parts of self-cleaning ranges. 4.2x00a0;The numerical values and visual evaluation derived by this test method are used to measure differences in heat resistant characteristics between enamel formulas intended to meet oven manufacturer specifications. 1.1x00a0;This test method covers the procedure for the qualitative and quantitative evaluation of static heat effects on porcelain enamel coatings. 1.2x00a0;This test method is adaptable to various temperatures and times, since the requirements in the porcelain enameling industry differ between manufacturers. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

DIN EN 1096-1-2012建筑業玻璃.涂層玻璃.第1部分:定義和分率

This European Standard defines the characteristics, properties and classification of coated glass for use in building.Test methods and procedures used to establish durability are in Parts 2 and 3 of this standard.Factory production control and evaluation of conformity, including Annex ZA, are in Part 4 of this standard.Test methods for determination of self cleaning performances of coated glass are in Part 5.This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.This standard is not applicable to:- adhesive backed polymeric films on glass (prEN 15755-1); mirrors made from silvered float glass (EN 1036-1) enamelled glass

DIN EN 1096-2-2012建筑物玻璃.涂層玻璃.第2部分:A、B、S級涂層要求和試驗方法

This European Standard specifies requirements and test methods related to artificial weathering and abrasion of coatings on glass for use in buildings.These tests are aimed at evaluating the resistance of the coating to attack by simulated natural weathering conditions as well as to abrasion. This attack can be considered as representative of that which could be found on the external and/or internal face of the glazing.This European Standard applies to Class A, B and S coatings, as described in EN 1096-1.

DIN EN 1096-3-2012建筑物玻璃.涂層玻璃.第3部分:C、D類涂層的要求和試驗方法

This European Standard specifies requirements and a test method related to resistance to solar radiation for coated glass for use in buildings.This test is aimed at evaluating if the exposure to solar radiation over an extended period of time produces any appreciable change in light transmittance and solar transmittance of the coated glass as well as a reduction of the infrared reflectance in the case of low emissivity coatings.This European Standard applies to Class C and D coatings as defined in EN 1096-1 and used in insulating glass units.

DIN EN 12505-2010食品加工機械.食用油離心機.安全性和衛生要求.德文版本EN 12505-2000+A1-2009

The standard supports the Machine Directive. It covers centrifugal machines used singularly or as part of plants for processing edible oils and fats. Machines for household purposes are not covered by the project.

DIN EN 16323-2014污水工程術語詞匯表; 三種語言版本EN 16323-2014

The standard applies for definitions of the essential terms in the field of the collection, transport, treatment, discharge (and reuse) of wastewater and in the field of sludge treatment, utilization and disposal.For the preparation or revision of all standards within the field of wastewater this document provides the general basis for the terms and definitions.

DIN EN ISO 5667-6-2016水質.取樣.第6部分:河水和溪水的取樣指南(ISO 5667-6-2014).德文版本EN ISO 5667-6-2016

This part of ISO 5667 sets out the principles to be applied to the design of sampling programmes, sampling techniques, and the handling of water samples from rivers and streams for physical and chemical assessment. It is not applicable to the sampling of estuarine or coastal waters nor for microbiological sampling. This part of ISO 5667 is neither applicable to the examination of sediment, suspended solids or biota, nor to dammed stretches of rivers or streams. Also, it is not applicable to passive sampling of surface waters (see ISO 5667-23). In cases where naturally occurring or artificially constructed dams result in the retention or storage of water for several days or more, the stretch of the river or stream should be considered as a standing water body and sampled according to ISO 5667-4.