燃氣燃燒器和燃燒器具用安全和控制裝置自動和半自動閥檢測

燃氣燃燒器和燃燒器具用安全和控制裝置自動和半自動閥檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 27748.1-2017固定式燃料電池發電系統 第1部分:安全

GB/T 27748的本部分是產品的安全標準，適用于固定式燃料電池發電系統，該系統可以是組裝的，自成體系的或由工廠提供完整集成系統的形式，均通過電化學反應來發電。本部分適用于：——直接或通過轉換開關與主網連接，或與獨立配電系統連接的系統；——提供交流電或直流電的系統；——具有或不具有回收可用熱量能力的系統；——使用以下各種燃料工作的系統：a)　天然氣或其他來源于可再生燃料(生物質)或化石燃料的富含甲烷的氣體，比如垃圾填埋氣、沼氣和煤層氣等；b)　來源于石油精制的燃料，例如柴油、汽油、煤油以及液化石油氣，如丙烷和丁烷；c)　來源于可再生燃料(生物質)或化石燃料的醇類、酯類、醚類、醛類、酮類、費托法合成液體和其他富氫的有機化合物，例如甲醇、乙醇、二甲醚、生物柴油等；d)　氫、含氫氣的氣體混合物，例如合成氣、民用燃氣等。本部分不適用于于：——微型燃料電池發電系統；——便攜式燃料電池發電系統；——驅動式燃料電池發電系統。本部分適用于應用在商業、工業和家庭等領域，安裝在室內和室外等無危害(未劃分等級)區域的固定式燃料電池發電系統。本標準考慮了燃料電池發電系統在可預期的情況下和在制造商可預設條件下使用時，所有涉及燃料電池系統的重大危險、危險場景和事件，但不包括與環境兼容性(安裝條件)有關的各種危險。本標準規定的危險情況僅限于可能對人身造成的傷害，或僅對燃料電池發電系統之外造成的破壞。本標準不涉及對燃料電池內部損壞的保護，只要這種內部損壞不會對燃料電池外部產生危害。本標準中的各項要求并非旨在限制創新，當考察本標準未曾涉及的燃料、材料、設計或構造時，這些替代方案需要被評估是否具備與本標準相當的安全、性能水平。

GB/T 30597-2014燃氣燃燒器和燃燒器具用安全和控制裝置通用要求

本標準規定了使用GB/T 13611規定的城鎮燃氣的燃氣燃燒器和燃燒器具用安全和控制裝置及其組件(以下簡稱“控制裝置”)的術語和定義、分類和分組、結構和材料、要求、試驗方法、標識、安裝和操作說明書、包裝、運輸和貯存。本標準適用于以下控制裝置:--自動和半自動閥;--燃燒控制裝置;--熄火保護裝置;--燃氣和空氣比例調節裝置;--壓力調節裝置;--旋塞閥總成;--溫度控制裝置;--多功能控制裝置;--壓力傳感裝置;--閥門檢驗系統。

GB/T 36699-2018鍋爐用液體和氣體燃料燃燒器技術條件

本標準規定了鍋爐用液體和氣體燃料燃燒器的分類與型號編制、組成與基本配置、基本要求、性能要求、設計與制造、檢驗、試驗與檢測、技術文件與標識、包裝、運輸和貯存、安裝、調試與使用等方面的技術要求。本標準適用于鍋爐用液體和氣體燃料的強制鼓風燃燒器和自然通風燃燒器。電站鍋爐啟動燃燒器、各類工業窯爐與工業加熱爐及其他用途燃燒器可參照本標準執行。

GB/T 37499-2019燃氣燃燒器和燃燒器具用安全和控制裝置 特殊要求 自動和半自動閥

本標準規定了使用GB/T 13611規定的城鎮燃氣的燃燒器和燃燒器具用自動和半自動閥(以下簡稱閥門)的術語和定義，分類和分組，結構和材料，要求，試驗方法，檢驗規則，標志、安裝和操作說明書，包裝、運輸和貯存。本標準適用于大進口壓力不大于500 kPa，用于燃氣熱水器、燃氣采暖熱水爐、燃氣燃燒器/機、燃氣取暖器、燃氣蒸箱、燃氣鍋爐等燃氣燃燒器具或燃燒設備，以電磁、電動或以機械方式直接或間接操作啟閉的常閉閥門。本標準不適用于CJ/T 132規定的閥門。

GB 50028-2006城鎮燃氣設計規范

本規范適用于向城市、鄉鎮或居民點供給居民生活、商業、工業企業生產、采暖通風和空調等各類用戶作燃料用的新建、擴建或改建的城鎮燃氣工程設計。 注:1 本規范不使用于城鎮燃氣門站以前的悵距離輸氣管道工程。 2 本規范不適用于工業企業自建供生產工藝用且燃氣質量不符合本規范質量要求的燃氣工程設計，但自建供生產工藝用且燃氣質量符合本規范要求的燃氣工程設計，可按本規范執行。工業企業內部自供燃氣給居民使用時，供居民使用的燃氣質量和工程設計應按本規范執行。 3 本規范不適用于海洋和內河輪船、鐵路車輛、汽車等運輸工具上的燃氣裝置設計。

CJ/T 113-2015燃氣取暖器

本標準規定了燃氣取暖器(以下簡稱取暖器)的術語和定義,分類與型號,結構和材料,要求,試驗方法,檢驗規則,標識和說明書,包裝、運輸和貯存。本標準適用于使用GB/T 13611規定的燃氣的取暖器,包括:a) 額定熱輸入不大于20 kW的家用取暖器;b) 單個燃燒器額定熱輸入不大于120 kW的非家用取暖器。本標準不適用于室外使用的取暖器、冷凝式取暖器、專為工業用途設計的取暖器、在移動的運輸交通工具中使用的取暖器。

CJ/T 346-2010家用燃具自動截止閥

本標準規定了家用燃具自動截止閥的術語和定義、分類、結構和材料、要求、試驗方法、標識、安裝和操作說明書、檢驗規則、包裝、運輸和貯運。本標準適用于標明大工作壓力在10kPa以下，公稱直徑不大于DN50，并且使用GB/T 13611規定的城鎮燃氣的器具上的閥門。本標準適用于以電磁、電動或以機械方式直接或間接操作的閥門。本標準適用于流體驅動控制閥(流體如：氣體、液體)。本標準適用于裝有關閉位置指示開關的閥門。

ISO 23551-1-2012氣體燃燒器和燃氣設備安全性和控制裝置.詳細要求.第1部分:自動和半自動閥門

This part of ISO 23551 specifies safety, constructional and\nperformance requirements and testing of automatic and\nsemi-automatic shut-off valves for gas burners, gas appliances and\nappliances of similar use.\nIt applies to\n— normally closed valves,\n— valves being mounted upstream to gas burners and gas\nappliances,\n— valves with declared maximum working pressures up to and\nincluding 500 kPa, for use on burners or in appliances using fuel\ngases as natural gas, manufactured gas or liquefied petroleum gas\n(LPG),\n— valves directly or indirectly actuated, electrically or\nby mechanical means,\n— valves actuated by hydraulic or pneumatic means,\n— valves where the flow rate is controlled by external\nelectrical signals, either in discrete steps or proportional to the\napplied signal and\n— valves fitted with closed position indicator\nswitches.\nThis part of ISO 23551 covers type testing only.

UL 296-2003燃油爐

These revisions are to the UL 296 proposals announced in the March 18, 2005 issue of ANSI's \"Standards Action.

UL 1776-2002高壓清洗機

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.

EN 746-2-2010工業熱加工工藝設備.燃燒和燃料儲運系統安全要求

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (InThis standard referred to as IThE).This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.This European Standard covers: fuel pipework downstream of and including the manual isolating valve; burner(s), burner system and ignition device; safety related control system (protective system).This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy. For thermal or catalytic post combustion and waste incineration,This European Standard applies only to auxiliary burners designed to start-up and/or support the process. The pressure hazard of the piping and components covered byThis standard is within the limits of maximum pressure/size relationship as described in normative Annex E.This European Standard also gives the necessary requirements for the information for use.This European Standard does not cover hazards from heating generated by electricity.This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE. NOTE EN 1539, Dryers and ovens, in which flammable substances are released-Safety requirementsThis European Standard is not applicable to combustion and fuel handling systems of welding and soldering machines; up-stream of the IThE manual isolating valve.This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system. Noise can be a significant hazard for combustion and fuel handling systems. It is not dealt with inThis standard.This European Standard is not applicable to combustion and fuel handling systems as part of IThE which is manufactured before the date of its publication as EN.

GSO ISO 23551-1-2016燃氣燃燒器和燃氣器具的安全和控制裝置特殊要求第1部分：自動和半自動閥門

This part of ISO 23551 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic shut-off valves for gas burners, gas appliances and appliances of similar use. It applies to — normally closed valves, — valves being mounted upstream to gas burners and gas appliances, — valves with declared maximum working pressures up to and including 500 kPa, for use on burners or in appliances using fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG), — valves directly or indirectly actuated, electrically or by mechanical means, — valves actuated by hydraulic or pneumatic means, — valves where the flow rate is controlled by external electrical signals, either in discrete steps or propor-tional to the applied signal and — valves fitted with closed position indicator switches. This part of ISO 23551 covers type testing only.

NF G45-008-1-2008干洗機的安全要求.第1部分:公共安全要求

La présente partie de l'ISO 8230 spécifie les exigences générales de sécurité pour les machines de nettoyage à sec.Elle est applicable aux machines de nettoyage à sec de toutes les tailles, à usage industriel et commercial, prévues pour le nettoyage des articles faits en textile, en cuir, en peaux ou en fourrures, utilisant exclusivement le perchloroéthylène ou un solvant inflammable comme produit de nettoyage.La présente partie de l'ISO 8230 n'est pas applicable aux : machines de nettoyage à sec mises à la disposition du public (par exemple les libres-services) ; machines de nettoyage à sec barrière telles que définies en 3.1.5 ; machines de nettoyage à sec à transfert telles que définies en 3.1.4 ; presses à repasser (voir l'ISO 10472-1 et l'ISO 10472-6) ; équipements auxiliaires, par exemple les systèmes de renouvellement d'air du local ou de récupération des déchets provenant du distillateur, l'unité extérieure de refroidissement d'eau ou les systèmes de récupération complémentaires de solvant provenant des boues de distillation.La présente partie de l'ISO 8230 identifie tous les phénomènes dangereux significatifs résultant de l'utilisation de la machine de nettoyage à sec, ce qui comprend à la fois l'utilisation normale et les mauvais usages prévisibles, et inclut la fourniture, l'utilisation et la maintenance. Elle spécifie les exigences de sécurité communes pour les machines de nettoyage à sec et est destinée à être utilisée conjointement avec l'ISO 8230-2 et l'ISO 8230-3, selon le cas. Les exigences spécifiques de l'ISO 8230-2 et de l'ISO 8230-3 prévalent sur les exigences correspondantes de la présente partie de l'ISO 8230.

DIN EN 303-7-2007加熱鍋爐.第7部分:用標稱熱輸出功率小于1000 kW的強排風燃爐裝備的燃氣中央加熱鍋爐

This European Standard specifies the requirements and test methods for the contruction,the safety and the rational energy usage for gas-fired standard and low temperature central heating boilers equipped with a forced draught burner.These boilers comprise a boiler body and a forced draught gas burner brought together at the producer's assembly facility,the whole being disigned and marketed as a complete boiler.This standard does not apply to the case of the assembly of a boiler body and a forced draught gas burner designed and marketed separately.In this case,EN 303-3 applies.This European Standard applies to type B boilers with a nominal heat output not exceeding 100 kw with a water temperature at normal operation not exceeding 105°C and with a maximum water-side operating pressure not exceeding 8 bar.This European Standard does not contain all the necessary requirements for:- condensing boilers and combination boilers;- boilers intended to be installed in the open;- boilers permanently fitted with more than one flue outlet;- boilers intended to be connected to a common flue having mechanical extraction;- boilers equipped with several combustion chambers.This European Standard does not apply to living-space dedicated boilers(see 3.6).This European Standard only covers type testing.

DIN EN 746-2-2011工業熱處理設備.第2部分:燃燒和燃料處理系統的安全要求;德文版本EN 746-2-2010

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE).This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.This European Standard covers:- fuel pipework downstream of and including the manual isolating valve;- burner(s), burner system and ignition device;- safety related control system (protective system).This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy.For thermal or catalytic post combustion and waste incineration, this European Standard applies only to auxiliary burners designed to start-up and/or support the process.The pressure hazard of piping and components covered by this standard is within the limits of maximum pressure/size relationship as described in normative Annex E.This European Standard also gives the necessary requirements for the information for use.This European Standard does not cover hazards from heating generated by electricity.This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE.This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system.Noise can be a significant hazard for combustion and fuel handling systems. It is not dealt with in this standard.This European Standard is not applicable to combustion and fuel handling systems as part of IThE which is manufactured before the date of its publication as EN.

DIN EN 1596-2005專用于液化石油器的規范.移動式和便攜式非家用強制對流直燃式空氣加熱器

The change A1 of EN 1596 concerns several technical amendments due to need for regulation appearing after ratification of the standard. The standard itself defines for the purpose of type approval the safety characteristics, the test methods and the marking of mobile, non-domestic forced convection direct fired air heaters with a nominal heat input of up to 180 kW (HS) for the combustion of 3rd family gases (liquefied petroleum gases). Most significant technical change stipulated by this draft ist the lowering of the air delivery temperature from 80 °C to 55 °C.

DIN EN 14829-2007不超過6kW的普通供熱用獨立式燃氣無煙筒對流加熱器

This document specifies, for the purpose of type examination, the requirements and test methods for construction, safety, marking and rational use of energy of 2ne and 3rd family gas-fired domestic flueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorific value). It covers the following Type AAS fixed flueless heaters: NOTE These are type A appliances fitted with an atmosphere sensing device, with or without a fan. a) heaters with or without a catalytic converter; b) Category 1 appliances burning gases of the second family; c) Category 2 appliances burning gases of the second and third families. It does not cover qi. Mobile heaters.ii. Category 1 appliances burning gases of the third family.iii. Portable flueless heaters.iv. Diffusive catalytic combustion heaters. There are no specific thermal efficiency requirements appropriate to these types of appliance as: -- All the heat produced by the combustion process is released into the space to be heated. -- The requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas. This standard is only applicable to appliances which are to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.