具有機械鎖門功能的電氣緊急制動裝置檢測

具有機械鎖門功能的電氣緊急制動裝置檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 17780.2-2012紡織機械.安全要求.第2部分：紡紗準備和紡紗機械

GB/T 17780的本部分規定了紡紗準備和紡紗機械的主要危險和相應的安全要求和/或措施。本部分適用于開松、除雜、混合、洗毛、打包、梳棉、絲束的切斷和牽切紡、梳理后道的紡紗準備工序以及紡紗中使用的所有機器、設備和相關裝置。本部分應與GB/T 17780.1結合使用。

GB/T 20867-2007工業機器人 安全實施規范

本標準規定了工業機器人安全標準的實施步驟和細則，從而增加了GB 11291標準的可操作性，便于廣大生產廠商、銷售商和用戶的設計、安裝、調試、操作和維護等相關人員全面準確地使用和實施機器人安全標準。 本標準適用于工業環境中的工業機器人及其系統的設計、生產、銷售、管理和使用。

TB 10014-2012鐵路工程地質鉆探規程

本規程適用于鐵路工程地質、水文地質鉆探及物探測井、孔內測試鉆孔的鉆探工作。

EN 81-31-2010電梯制造與安裝安全規范.僅貨運電梯.第31部分:僅運送貨物的電梯

This European Standard applies to new electric accessible goods only lifts with traction or positive drive and new hydraulic accessible goods only lifts; permanently installed in restricted areas and/or only used by authorised and instructed persons (users); serving fixed and permanent landing levels; having a load carrying unit made of a single load carrying area; designed for the transportation of goods only; moving along a fixed path (e. g. scissor lifts; lifts with guide rails) and inclined not more than 15° to the vertical; with rated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and not intended to move persons.This standard deals with all significant hazards; hazardous situations and events with the exception of those listed in below; relevant to accessible goods only lifts; when they are used as intended and under the conditions foreseen by the manufacturer.

EN 1034-5-2005機械的安全性.造紙機和精整機的設計和結構安全性要求.第5部分:切紙機.包含修改件A1-2009

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with EN 1034-1:2000+A1:2010. Paper dust and edge strip suction devices are not covered byThis standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).This standard does not apply to: sheeters for corrugated board (see EN 1010-5); sheeters for foil (see EN 1010-1); sheeters with sheet feeders (see EN 1010-1); guillotines (see EN 1010-3:2002).This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

EN 1034-6-2005機械安全.造紙和整飾機械的設計和結構用安全要求.第6部分:砑光機.包含修改件A1-2009

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

EN ISO 11111-7-2005紡織機械.安全要求.第7部分:染色和精整機械.包含修改件A1-2009［代替:CEN EN ISO 11111］

This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1. It specifies significant hazards and corresponding safety requirements and/or measures for dyeing and finishing machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used in preparation, dyeing, printing, fixation, wetting, drying, finishing and making-up/presentation, as specified in Clause 5.

DIN EN 81-3-2011電梯建造和安裝的安全規則.第3部分:電動和液壓載貨升降機;德文版本EN 81-3-2000+A1-2008 + AC-2009

1.1 This standard specifies the safety rules for the construction and installation of permanently installed new electric service lifts with traction or positive drive, or hydraulic service lifts defined as lifting equipment, serving defined landing levels, having a car, the interior of which is regarded as inaccessible to persons on account of its dimensions and means of construction, suspended by ropes or chains or supported by a ram and moving between rigid vertical guide rails or guide rails whose inclination to the vertical does not exceed 15° and driven electrically or hydraulically.This standard covers service lifts with rated load not exceeding 300 kilogrammes and not intended to move persons.1.2 In addition to the requirements of this standard supplementary requirements shall be considered in special cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transporting dangerous goods, etc.).1.3 This standard does not cover:a) service lifts with drives other than statedb) important modifications (see annex E) to a service lift installed before this standard is brought into application;c) lifting appliances, such as paternosters, mines lifts, theatrical lifts, appliances with automatic caging, skips and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances;d) installations where the inclination of the guide rails to the vertical exceeds 15°;e) safety during transport, installation, repairs and dismantling of service lifts;f) the use of glass for the walls of the well, for the car and for the landing doors including the vision panels.However, this standard may usefully be taken as a basis.Noise and vibrations are not dealt with in this standard because these are not relevant to the safe use of the service lift.Fire propagation is not dealt with in this standard.1.4 To satisfy the condition of inaccessibility to the car, the car dimensions shall not exceed:a) for floor area, 1,0 m2;b) for depth, 1,0 m;c) for height, 1,20 m.The height of 1,20 m shall not be limited if the car comprises several permanent compartments, each of which satisfies the above requirements.In particular, lifting equipment intended exclusively for the transportation of goods, but having a car with dimensions exceeding any one of the figures above shall not be entered in the category 'service lifts'.1.5 This standard covers the safety requirements for service lifts with rated speeds up to 1 m/s. NOTE For service lifts with higher rated speeds additional requirements shall be applied as appropriate in order to maintain the same level of safety.

DIN EN 81-41-2011電梯的結構和安裝用安全規則.載人及載貨專用電梯.第41部分:殘障人員使用的垂直升降平臺;德文版本EN 81-41-2010

This European Standard delals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical vertical lifiting platforms affixed to a building structure intended for use by persons with impaired mobility

DIN EN 618-2011連續搬運設備和系統.固定帶式輸送機除外的散裝材料的機械搬運設備的安全性和電磁兼容性要求.德文版本EN 618-2002+A1-2010

This standard deals with the technical requirements to minimise the risks due to hazards, which can arise during operation and maintenance of mechanical handling equipment and which are designed for continuously conveying bulk materials from the loading point(s) to the unloading point(s). In general, it also applies to equipment which are built into machines or attached to machines. This standard deals with the technical requirements for EMC.

DIN EN 1034-17-2012機械安全性.造紙機械和精整機設計和結構的安全性要求.第17部分:紙巾機械.德文版本EN 1034-17-2012

This European Standard applies to tissue making machines for the production of soft and crepe paper and is valid together with EN 1034-1:2000+A1:2010.

DIN EN 1034-21-2012機械安全性.紙張制造和整飾機械設計和建造的安全性要求.第21部分:涂布機.德文版本EN 1034-21-2012

This European Standard applies to coating machines applying the wet process for off-line coating of base paper and is valid together with EN 1034-1:2000+A1:2010.

BS EN 81-3-2000+A1-2008電梯建造和安裝的安全規則.第3部分:電動和液壓自動回轉送貨機

1.1 This standard specifies the safety rules for the construction and installation of permanently installed newelectric service lifts with traction or positive drive, or hydraulic service lifts defined as lifting equipment, servingdefined landing levels, having a car, the interior of which is regarded as inaccessible to persons on account ofits dimensions and means of construction, suspended by ropes or chains or supported by a ram and movingbetween rigid vertical guide rails or guide rails whose inclination to the vertical does not exceed 15° and drivenelectrically or hydraulically.This standard covers service lifts with rated load not exceeding 300 kilogrammes and not intended to movepersons.1.2 In addition to the requirements of this standard supplementary requirements shall be considered inspecial cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transportingdangerous goods, etc.).1.3 This standard does not cover:a) service lifts with drives other than stated in 1.1;b) important modifications (see annex E) to a service lift installed before this standard is brought intoapplication;c) lifting appliances, such as paternosters, mines lifts, theatrical lifts, appliances with automatic caging, skipsand hoists for building and public works sites, ships’ hoists, platforms for exploration or drilling at sea,construction and maintenance appliances;d) installations where the inclination of the guide rails to the vertical exceeds 15°;e) safety during transport, installation, repairs and dismantling of service lifts;f) the use of glass for the walls of the well, for the car and for the landing doors including the vision panels.However, this standard may usefully be taken as a basis.Noise and vibrations are not dealt with in this standard because these are not relevant to the safe use of theservice lift.Fire propagation is not dealt with in this standard.1.4 To satisfy the condition of inaccessibility to the car, the car dimensions shall not exceed:a) for floor area, 1,0 m2;b) for depth, 1,0 m;c) for height, 1,20 m.The height of 1,20 m shall not be limited if the car comprises several permanent compartments, each of whichsatisfies the above requirements.In particular, lifting equipment intended exclusively for the transportation of goods, but having a car withdimensions exceeding any one of the figures above shall not be entered in the category 'service lifts'.1.5 This standard covers the safety requirements for service lifts with rated speeds up to 1 m/s.NOTE For service lifts with higher rated speeds additional requirements shall be applied as appropriate in order tomaintain the same level of safety.

BS EN 81-31-2010電梯的建造和安裝用安全性規程.僅供貨物運輸的電梯.僅用于貨物進入的電梯

This European Standard applies to new electric accessible goods only lifts with traction or positivedrive and new hydraulic accessible goods only lifts, permanently installed in restricted areas and/or onlyused by authorised and instructed persons (users), serving fixed and permanent landing levels, having aload carrying unit made of a single load carrying area, designed for the transportation of goods only, movingalong a fixed path (e.g. scissor lifts, lifts with guide rails) and inclined not more than 15° to the vertical, withrated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and notintended to move persons.This standard deals with all significant hazards, hazardous situations and events with the exception of thoselisted in 1.3 below, relevant to accessible goods only lifts, when they are used as intended and under theconditions foreseen by the manufacturer (see Clause 4).

BS EN 1034-5-2005+A1-2009機械安全性.造紙機和精整機的設計和結構安全性要求.切紙機

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control unitsintended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010\". Paperdust and edge strip suction devices are not covered by this standard. It deals with all significant hazards,hazardous situations and hazard events relevant to sheeters, when they are used as intended and under theconditions foreseen by the manufacturer (see clause 4). This standard does not apply to:? sheeters for corrugated board (see EN 1010-5);? sheeters for foil (see EN 1010-1);? sheeters with sheet feeders (see EN 1010-1);? guillotines (see EN 1010-3:2002).This document is not applicable to sheeters that have been manufactured before the date of publication of thisdocument by CEN.

BS EN 1034-6-2005+A1-2009機械安全性.造紙和整飾機械的設計和結構用安全性要求.砑光機

This European Standard applies to calenders intended for use in paper making and finishing and shall beused together with !EN 1034-1:2000+A1:2010\". It deals with all significant hazards listed in clause 4.Related safety requirements and/or measures are described in clause 5.It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into theunwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls..This European Standard is not applicable to calenders that have been manufactured before the date ofpublication of this standard.