玻璃纖維縫紉線檢測

玻璃纖維縫紉線檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 2035-2008塑料術語及其定義

本標準定義了用于塑料工業中的術語。當術語有一個或多個同義詞時，同義術語跟隨在優選的術語之后。進而以正確的字母排序詳細地列出同義詞。不贊成的術語用“不贊成”指明。可能找不出定義或沒有指明定義時，在其術語后面利用一個符號→。縮略符號“cf.”(參見)指明使用者可以參見其他術語（不是同義詞）、定義或以下述的符號對該術語所含信息進行注解。

GB/T 7113.2-2014絕緣軟管 第2部分:試驗方法

GB/T 7113的本部分規定了包括熱收縮管在內的絕緣軟管的試驗方法。這類軟管主要被用于電氣設備的導體部分和接頭處的絕緣。本部分適用于絕緣軟管。

GB/T 13773.1-2008紡織品.織物及其制品的接縫拉伸性能.第1部分:條樣法接縫強力的測定

GB/T 13773的本部分規定了采用條樣法對接縫的縫合處施加垂直方向的力，測定其接縫承受大力的方法。本部分適用于機織物及其制品，也適用于其他技術生產的織物。本部分不適用于彈性機織物、土工合成材料、非織造布、涂層織物、玻璃纖維織物以及碳纖維和聚烯烴扁絲生產的織物。接縫織物根據產品要求或有關各方面的同意，可以從縫合制品中獲得，也可以用織物樣品制備。本方法僅適用于直線接縫，不適用于較大彎曲的接縫。本方法規定采用等速伸長（CRE）試驗儀。

GB/T 13773.2-2008紡織品.織物及其制品的接縫拉伸性能.第2部分:抓樣法接縫強力的測定

GB/T 13773 的本部分規定了采用抓樣法對接縫的縫合處施加垂直方向的力，測定其接縫承受大力的方法。本部分適用于機織物及其制品，也適用于其他技術生產的織物。本部分不適用于彈性機織織物、土工合成材料、非織造布、涂層織物、玻璃纖維織物以及碳纖維和聚烯烴扁絲生產的織物。接縫織物根據產品要求或有關各方的同意，可以從縫合制品中獲得，也可以用織物樣品制備。本方法僅用于直線接縫，不適用于較大彎曲的接縫。本方法規定采用等速伸長（CRE)試驗儀。

GB/T 35611-2017綠色產品評價 紡織產品

本標準規定了綠色紡織產品的評價指標和評價方法。本標準適用于各類紡織產品，包括纖維、紗線、織物、制品及其附件。

BB/T 0037-2012雙面涂覆聚氯乙烯阻燃防水布和篷布

本標準規定了雙面涂覆聚氯乙烯阻燃防水布(以下簡稱涂覆布)和篷布的產品類型、代碼、要求、試驗方法、檢驗規則等。本標準適用于以維綸纖維、尼龍纖維、聚酯纖維、玻璃纖維等織物為基布,雙面涂覆聚氯乙烯樹脂的涂覆布和篷布。

HB 7756.12-2005基于CATIA建模要求 第12部分：絕緣件

本部分規定了應用CATIA軟件實施絕緣件建模的專用要求。 本部分適用于型號研制中應用CATIA軟件設計、修改和發放的絕緣件建模。也適用于民品開發項目中使用CATIA軟件設計、修改和發放的絕緣件類零件建模。

JC/T 573-2007玻璃纖維縫紉線

本標準規定了玻璃纖維縫紉線（以下簡稱縫紉線）的分類與代號、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。 本標準適用于由玻璃纖維原絲經退并、加捻并經浸涂處理而制成的光滑的合股紗線。主要用于縫制玻璃纖維過濾布、玻璃纖維氈和其它玻璃纖維制品。

JC/T 573-2023玻璃纖維縫紉線

本文件規定了玻璃纖維縫紉線的分類與代號、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。\r本文件適用于由玻璃纖維原絲經退并、加捻并經涂覆處理而制成的光滑的合股紗線。主要用于縫制玻璃纖維過濾布、玻璃纖維縫氈和其它玻璃纖維制品。

LY/T 2583-2016森林防火避火罩

本標準規定了森林防火避火罩(以下簡稱“避火罩”)的術語和定義、設計要求、性能要求、試驗方法、檢驗規則、標志、使用說明書、包裝、運輸和貯存。本標準適用于森林撲火人員應急自救時使用的避火罩。

NB/T 20358.10-2018核電廠建設工程預算定額 第10部分:核島防腐、保溫工程

本部分規定了核電廠建設工程預算定額中的核島防腐、保溫工程定額。本部分適用于壓水堆核電機組新建、擴建工程的核島工程，以及BOP工程中的核島廢液貯罐廠房、常規島廢液貯罐廠房、放射性固體廢物處理輔助廠房、固體廢物暫存庫、放射性機修及去污車間等有核安全要求的子項。其他核電堆型和核工程可參考使用。

ASTM D4030-1999玻璃纖維繩和縫紉線規格

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3 This specification shows the values in both inch-pound units and in SI units. \"Inch-pound units\" is the technically correct name for the customary units used in the United States. \"SI\" units is the technically correct name for the system of metric units known as the International System of Units. The values stated in inch-pound units are to be regarded as standard; the values in SI units are provided as information only. 1.4 The following precautionary caveat pertains only to the test methods portion, Sections 22 through 33, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1-This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140H Yarn, Cord, Sleeving, Cloth, and Tape-Glass MIL-C-9084C Cloth, Glass Finished for Resin Laminates

ASTM D4030-2004玻璃纖維繩和縫紉線的標準規范

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated.1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry.1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4030/D4030M-2009玻璃纖維繩和縫紉線的標準規范

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4030/D4030M-2009e1玻璃纖維繩和縫紉線的標準規范

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4030/D4030M-2015玻璃纖維繩和縫紉線的標準規格

1.1x00a0;This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2x00a0;This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

NF G38-116-2008土工織物.用寬條法對接頭/接縫處的拉伸試驗

La présente Norme internationale spécifie une méthode d'essai de référence pour la détermination des propriétés mécaniques en traction des joints et coutures des géosynthétiques, à l'aide d'une bande de grande largeur. La méthode est applicable à la plupart des géosynthétiques. Elle s'applique également aux géogrilles, mais il peut s'avérer nécessaire de modifier les dimensions de l'éprouvette. Cet essai n'est pas applicable aux barrières géosynthétiques polymériques et bitumineuses.Cette méthode quantifie la résistance à la traction d'un joint ou d'une couture entre géosynthétiques. Elle peut fournir des données indiquant la résistance à la traction que peut atteindre un joint ou une couture. L'efficacité du joint ou de la couture peut être calculée en comparant la résistance à la traction du joint ou de la couture avec la résistance de matériaux d'un seul tenant, déterminée conformément à l'ISO 10319.Sont inclus des modes opératoires pour la mesure des propriétés mécaniques en traction d'éprouvettes conditionnées et d'éprouvettes humides.Il peut être nécessaire de modifier légèrement les techniques employées pour des géosynthétiques particuliers, par exemple des géotextiles de renforcement, des produits à mailles ou géotextiles en fibre de verre, afin d'empêcher tout glissement dans les mors ou tout endommagement après serrage dans les mors. L'essai de base des joints ou coutures de tous types de géosynthétiques utilise des éprouvettes de 200 mm de large, avec une réserve de 25 mm supplémentaires de chaque c?té au niveau du joint ou de la couture pour assurer leur stabilité pendant l'essai (voir Figure 1).

DIN EN ISO 472-2013塑料.詞匯表(ISO 472-2013).三種語言版本EN ISO 472-2013

This standard defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61), and general terms and definitions of polymer science used in all aspects of plastics technology.

DIN EN ISO 14362-1-2017紡織品.源于偶氮著色劑的某些芳香胺的測定方法.第1部分:通過或未經萃取纖維獲得某些偶氮著色劑的使用檢測(ISO 14362-1-2017);德文版本EN ISO 14362-1-2017

This document describes a method to detect the use of certain azo colorants that may not be used in the manufacture or treatment of certain commodities made of textile fibres and that are accessible to reducing agent with and without extraction. Azo colorants accessible to reducing agent without extraction are those used to colour with pigments or to dye - cellulosic fibres (e. g. cotton, viscose), - protein fibres (e. g. wool, silk), and - synthetic fibres (e. g. polyamide, acrylic). Azo colorants accessible with extraction are those used to dye man-made fibres with disperse dyes. The following man-made fibres can be dyed with disperse dyes: polyester, polyamide, acetate, triacetate, acrylic and chlorofibre. The method is relevant for all coloured textiles, e. g. dyed, printed and coated textiles.

BS 8509-2008+A1-2011家用兒童床.安全性要求和試驗方法

This British Standard specifies requirements for the safety of children’sbeds for domestic use with a maximum internal width of 1 000 mm anda maximum height of bed base of 600 mm .The requirements apply to children’s beds that are fully assembled andready for use.This British Standard does not apply to beds for adults, foldawaybeds, bunk and high beds, cabin/mid-height beds, children’s cots,bedside cots and children’s cots that allow free access for the child bymeans of a hinged opening or removal of some vertical bars/slats.This standard does not cover products that have been incorporated intochildren’s beds, for example luminaires, tables or storage furniture.