膨潤土干燥劑檢測

膨潤土干燥劑檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 5005-2010鉆井液材料規范

本標準規定了油氣鉆井液材料的性能和測試步驟。這些材料包括重晶石粉、赤鐵礦粉、鉆井級膨潤土、未處理膨潤土、OCMA級膨潤土、凹凸棒石、海泡石、技術級低黏羧甲基纖維素、技術級高黏羧甲基纖維素、淀粉、低黏聚陰離子纖維素、高黏聚陰離子纖維素及鉆井級生物聚合物。

GB/T 29170-2012石油天然氣工業 鉆井液 實驗室測試

本標準規定了鉆井液材料和鉆井液的物理、化學、流變等性能的實驗室測試方法。本標準適用于水基鉆井液、油基鉆井液以及其他基液或人工配制流體。本標準不適用于作為控制鉆井液性能的詳細手冊。由于攪拌條件和測試溫度對鉆井液性能影響顯著,本標準給出了推薦的攪拌條件和測試溫度。

GB/T 29172-2012巖心分析方法

本標準規定了巖心的鉆取、處理、保存及巖心分析的準備、測試方法、技術要求及編寫報告的格式、本標準適用于在油氣藏勘探、開發過程中,對鉆井取心及井壁取心巖樣的測試分析,其他巖心的分析亦應參照執行、

GB/T 36198-2018土壤質量 土壤氣體采樣指南

本標準給出了有關土壤氣體的采樣指南。本標準不適用于進入大氣的土壤氣體測定、大氣氣體采樣或被動采樣過程。

HB 7041-1994航空行業非金屬材料代碼

本標準規定了航空行業常用非金屬材料的分類原則、編碼方法和具體的分類與代碼表。　　本標準適用于航空行業各企事業單位。

JC/T 2266-2014凹凸棒石粘土制品

本標準規定了凹凸棒石粘土制品的術語和定義、標記、分級和要求、試驗方法、檢驗規則以及標志、包裝、運輸和貯存。本標準適用于以凹凸棒石粘土為原料,制得的吸附脫色劑、干燥劑、粘結劑、涂料用、填料用、寵物墊料用、凹凸棒石粘土復合助留劑、高粘凹凸棒石粘土、凹凸棒石廢水處理吸附劑、提純凹凸棒石、納米凹凸棒石、凹凸棒石無機凝膠等12種凹凸棒石粘土加工產品。

JC/T 2269-2014膨潤土干燥劑

本標準規定了膨潤土干燥劑的要求、試驗方法、檢驗規則以及標志、包裝、運輸和貯存。本標準適用于由天然膨潤土加工制得的干燥劑。

JTS 237-2017水運工程地基基礎試驗檢測技術規程

本規程適用于水運工程地基基礎的試驗和檢測。

SY/T 0439-2012石油天然氣工程建設基本術語

本標準適用于油田、氣田、輸油管道、輸氣管道、油庫、儲氣庫、液化天然氣等工程設計。

SY/T 5336-2006巖心分析方法

這部分闡述設計一個取心程序的復雜性、決策制定及影響選擇的因素。

EN ISO 10416-2009石油和天然氣工業.鉆探泥漿.實驗室試驗

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or “make-up” fluid.

DIN EN ISO 10414-2-2011石油和天然氣工業.鉆井液的現場測試.第2部分:油基液(ISO 10414-2-2011);英文版本EN ISO 10414-2-2011,僅限CD-ROM

This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) oil, water and solids concentrations;e) alkalinity, chloride concentration and calcium concentration;f) electrical stability;g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations;h) low-gravity solids and weighting material concentrations.The annexes provide additional test methods or examples that can optionally be used for the determination of:- shear strength (Annex A);- oil and water concentrations from cuttings (Annex B);- drilling fluid activity (Annex C);- aniline point (Annex D);- lime, salinity and solids concentration (Annex E);- sampling, inspection and rejection (Annex F);- rig-site sampling (Annex G);- cuttings activity (Annex H);- active sulphides (Annex I);- calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances (Annex J);- permeability plugging apparatus with set-screw secured end cap (Annex K);- permeability plugging apparatus with threaded end cap (Annex L);- elastomer compatibility (Annex M);- sand content of oil-based fluid (Annex N);- identification and monitoring of weight-material sag (Annex O);- oil-based drilling fluid test report form (Annex P).

DIN EN ISO 10416-2010石油和天然氣工業.鉆井液.實驗室試驗

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid.

DIN EN ISO 13500-2011石油和天然氣工業.鉆井液材料.規范和試驗(ISO 13500-2008 + AMD 1-2010);英文版本EN ISO 13500-2008 + A1-2010,僅在CD-ROM上

This International Standard covers physical properties and test procedures for materials manufactured for use in oil-and gas-wel drilling fluids.

DIN EN ISO 13501-2011石油和天然氣工業.鉆井液.工藝設備的評定(ISO 13501-2011);英文版本EN ISO 13501-2011

This International Standard provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing.

BS EN 14415-2004土工合成物隔層.耐浸出性測定的試驗方法

This European Standard describes a method of testing the resistance to leaching of polymeric or bituminous geosynthetic barriers, and the polymeric component of geosynthetic clay barriers, in hot water (method A), aqueous alkaline liquids (method B) and organic alcohols (method C).

BS EN ISO 10414-2-2011石油和天然氣工業.鉆井液的現場測試.油基液

This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-baseddrilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) oil, water and solids concentrations;e) alkalinity, chloride concentration and calcium concentration;f) electrical stability;g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations;h) low-gravity solids and weighting material concentrations.The annexes provide additional test methods or examples that can optionally be used for the determination of:- shear strength (Annex A);- oil and water concentrations from cuttings (Annex B);- drilling fluid activity (Annex C);- aniline point (Annex D);- lime, salinity and solids concentration (Annex E);- sampling, inspection and rejection (Annex F);- rig-site sampling (Annex G);- cuttings activity (Annex H);- active sulphides (Annex I);- calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluidbalances (Annex J);- permeability plugging apparatus with set-screw secured end cap (Annex K);- permeability plugging apparatus with threaded end cap (Annex L);- elastomer compatibility (Annex M);- sand content of oil-based fluid (Annex N);- identification and monitoring of weight-material sag (Annex O);- oil-based drilling fluid test report form (Annex P).

BS EN ISO 10416-2009石油和天然氣工業.鉆探泥漿.實驗室試驗

This International Standard provides procedures for the laboratory testing of both drilling fluid materials anddrilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-baseddrilling fluids, as well as the base or “make-up” fluid.It is not applicable as a detailed manual on drilling fluid control procedures. Recommendations regardingagitation and testing temperature are presented because the agitation history and temperature have aprofound effect on drilling fluid properties.