泡沫設備和泡沫液檢測

泡沫設備和泡沫液檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 5907.5-2015消防詞匯 第5部分:消防產品

GB/T 5907的本部分界定了消防產品的常用術語和定義。本部分適用于消防管理、消防標準化、消防工程、消防科學研究、教學、咨詢、出版及其他有關工作領域。

GB 20031-2005泡沫滅火系統及部件通用技術條件

本標準規定了泡沫滅火系統及部件（包括泡沫比例混合器、泡沫比例混合裝置、低倍數空氣泡沫產生器、高背壓泡沫產生器、泡沫噴頭、泡沫鉤管、泡沫炮、泡沫槍、中倍數泡沫產生器、高倍數泡沫產生器、泡沫消火栓、單向閥、控制閥門、過濾器、控制盤、控制柜、半固定式（輕便式）泡沫滅火裝置、連接軟管、泡沫消火栓箱、閉式泡沫-水噴淋系統等）的性能要求、試驗方法、檢驗準則、包裝、運輸貯存要求等。 本標準適用于各類泡沫滅火系統及部件。

GB 50074-2014石油庫設計規范

本規范適用于新建、擴建和改建石油庫的設計。本規范不適用于下列易燃和可燃液體儲運設施:1 石油化工企業廠區內的易燃和可燃液體儲運設施;2 油氣田的油品站場(庫);3 附屬于輸油管道的輸油站場;4 地下水封石洞油庫、地下鹽穴石油庫、自然洞石油庫、人工開挖的儲油洞庫;5 獨立的液化烴儲存庫(包括常溫液化石油氣儲存庫、低溫液化烴儲存庫);6 液化天然氣儲存庫;7 儲罐總?cè)萘看笥诨虻扔?200000m<上標3>,僅儲存原油的石油儲備庫。

DIN EN 15767-3-2010消防泵供噴射滅火劑的便攜式設備.便攜式監控器.第3部分:泡沫裝置;德文版本EN 15767-3-2010

This European Standard applies to foam devices used in conjunction with portable monitors. In addition to the requirements given in EN 15767-1, this part of this European standard applies to devices designed for aspirating air and projecting low expansion foam and, in some cases, inducting foam concentrate. It specifies requirements for safety, performance, classification and designation, as well as test methods, instructions for use and maintenance and marking.

DIN EN 16327-2014消防. 正壓配比系統(PPPS)和壓縮空氣泡沫系統(CAFS); 德文版本EN 16327-2014

The document contains safety and performance requirements for positive pressure foam proportioning systems (PPFPS) and compressed air foam systems (CAFS). In these systems either additives (e. g. in positive pressure foam systems) or additives and compressed gases - normally compressed air - (e. g. in compressed air foam arrangements) are added to the water after the fire-fighting centrifugal pump, in each case under pressure for a continuous operation. These systems are fixed installed in fire fighting vehicles.

DIN EN 16712-1-2015由消防泵提供噴射滅火劑的便攜式設備. 便攜式泡沫設備. 第1部分: PN 16電感器; 德文版本EN 16712-1-2015

This standard defines requirements and tests which apply to inductors PN 16 which are used to proportion foam liquids or other additives to the water stream and work according to the Venturi principle.

DIN EN 16712-2-2015由消防泵提供噴射滅火劑的便攜式設備. 便攜式泡沫設備. 第2部分: 吸液管; 德文版本EN 16712-2-2015

This document specifies performance requirements and test methods for pick-up tubes. This document applies to pick-up tubes from DN 20 to DN 50 which are used for the suction of foam concentrate or additives and defines their requirements and test procedures. Pick-up tubes are especially used for the suction of foam concentrate or additives with inductors in accordance with EN 16712-1. Pick-up tubes can also be used for the suction of other substances (e. g. absorbents).

DIN EN 16712-3-2015由消防泵提供噴射滅火劑的便攜式設備. 便攜式泡沫設備. 第3部分: PN 16低倍數和中倍數手持式泡沫支管; 德文版本EN 16712-3-2015

This document applies to handheld foam branchpipes for low and medium expansion foam used by fire and rescue services and defines their specification and test procedures.NOTE In this document, the term "branchpipe" also refers to "handheld foam branchpipes".

DIN EN ISO 13702-2015石油和天然氣工業.海上生產設備著火和爆炸的控制和減弱.要求和指南(ISO 13702-2015); 英文版本EN ISO 13702-2015

This International Standard describes the objectives and functional requirements for the control and mitigation of fires and explosions on offshore installations used for the development of hydrocarbon resources. This International Standard is applicable to: - fixed offshore structures; - floating systems for production, storage and offloading; - petroleum and natural gas industries. Mobile offshore units as defined in this International Standard and subsea installations are excluded, although many of the principles contained in this International Standard can be used as guidance. This International Standard is based on an approach where the selection of control and mitigation measures for fires and explosions is determined by an evaluation of hazards on the offshore installation. The methodologies employed in this assessment and the resultant recommendations will differ depending on the complexity of the production process and facilities, type of facility (i.e. open or enclosed), manning levels, and the environmental conditions associated with the area of operation. NOTE Statutory requirements, rules and regulations can in addition be applicable for the individual offshore installation concerned.

BS EN 15767-3-2010用消防泵噴射滅火劑的手持設備.手持監控器.泡沫設備

1.1 In addition to the requirements given in EN 15767-1, this part of this European standard applies todevices designed for aspirating air and projecting low expansion foam and, in some cases, inducting foamconcentrate. It specifies requirements for safety, performance, classification and designation, as well as testmethods, instructions for use and maintenance and marking.1.2 This European Standard is only applicable to foam devices which are manufactured after its date of publication.