海上和有關結構防護漆檢測

海上和有關結構防護漆檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 37443-2019海洋平臺起重機一般要求

本標準規定了海洋平臺起重機(以下簡稱起重機)的載荷和載荷組合、結構及組成、機構、主要零部件、驅動和控制系統、人員起吊、安全裝置、涂裝、試驗、標志和標牌等一般要求。本標準適用于海洋平臺起重機的設計、制造和驗收。本標準不適用于波浪補償?shù)忍厥庑褪降钠鹬貦C及吊架和/或緊急逃生裝置。

HG/T 3792-2014交聯型氟樹脂涂料

本標準規定了交聯型氟樹脂涂料產品的產品分類，要求，試驗方法，檢驗規則，標志、包裝和貯存等內容。本標準適用于以含反應性官能團的氟樹脂為主要成膜物并加入顏填料(清漆不加)、溶劑、助劑等輔料作為主劑，以脂肪族多異氰酸酯樹脂為同化劑的雙組分常溫固化型建筑外墻、混凝土表面和金屬表面用面漆。本標準還適用于以含反應性官能團的氟樹脂為主要成膜物，以氨基樹脂或封閉型脂肪族多異氰酸酯樹脂為交聯劑，并加入顏填料(清漆不加)、溶劑、助劑等輔料制成的單組分烘烤同化型金屬表面用面漆。用于其他基材表面的交聯型氟樹脂涂料也可參考本標準。

TS EN ISO 12944-9-2018色漆和清漆. 防護漆體系對鋼結構的腐蝕防護. 第9部分: 海上建筑及相關結構用防護涂料體系和實驗室性能測試方法(ISO 12944-9:2018)

This document specifies the performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water).

DIN 50929-1-2017金屬腐蝕.承受外部腐蝕時金屬材料腐蝕的可能性.第1部分:總則

The definitions described in this standard indicate the rating of corrosion probability of metallic materials in a corrosive media which contains an aqueous electrolyte which affect permanently or from time to time the surface of a component. It could be installation parts in buildings or containers, tubes and construction parts outside of buildings which are exposed to corrosion of soil, ground and surface water.

DIN EN 10339-2007陸上和海上輸水管道用鋼管. 防腐蝕用液體內壁環氧襯里

This European Standard specifies the requirements for the application of liquid applied epoxy internal linings,for the corrosion protection of steeltubes.This type oflining is generally used in the transport and distribution,under pressure or by gravity,of water intended for human consumption and industrial use,sea water,waste water and also in fire water.The temperature of the water transported generally does not exceed 50℃.The choice of the lining and its limits of use depend on the type of product used,the pipe laying conditions,the temperature and the chemical composition of the fluid.The choice of the product for the medium to be transported and its qualification are not part of this European Standard.The lining consists normally of one layer of liquid product,applied by spray airless technique after surface preparation.All or some of the requirements of this European Standard can apply to the internal linings of fittings,if agreedby the purchaser and the coater.The lining in this European Standard can be applied to longitudinally or spirally welded tubes and to seamless steel tubes used for the construction of pipelines for conveying liquids.This European Standard does not cover in-situ applied or rehabilitation linings.The constituent materials of epoxy linings,when used under the conditions for which they are designed,in permanentor temporary contct with water intended for human consumption,should not change the quality of that water to such an extent that it fails to comply with the requirements of European regulations at the end user.For this purpose,reference should be made to the relevant national standards transposing EN stsndards when available,dealing with the influence of materials on water quality.

DIN EN 12007-3-2015燃氣供應系統.大使用壓力小于等于16bar的管道.第3部分:鋼專用功能要求;德文版本EN 12007-3-2015

This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar.

DIN EN 16222-2012船體陰極保護.德文版本EN 16222-2012

This European Standard defines the general criteria and recommendations for cathodic protection of immersed external ship hulls and appurtenances.This European Standard does not cover safety and environmental protection aspects associated with cathodic protection. Relevant national or international regulations and classification society requirements apply.

DIN EN ISO 16961-2015石油, 石化和天然氣工業. 鋼制儲罐的內部涂層和內襯 (ISO 16961-2015); 英文版本EN ISO 16961-2015

This International Standard specifies the minimum requirements for surface preparation, materials, application, inspection and testing of internal coating lining systems that are intended to be applied on internal surfaces of steel storage tanks of crude oil, hydrocarbons and water for corrosion protection. It covers both new construction and maintenance works of tank internal coating and lining as well as the repair of defective and deteriorated system. This International Standard also provides the minimum requirements for shop performance testing of the coated/lined samples and the criteria for their approval.

DIN EN ISO 21457-2010石油,石化和天然氣工業.油和氣體產品系統的材料選擇和腐蝕控制(ISO 21457-2010).德文版本EN ISO 21457-2010

This International Standard identifies the corrosion mechanisms and parameters for evaluation when performing selection of materials for pipelines, piping and equipment related to transport and processing of hydrocarbon production, including utility and injection systems. This includes all equipment from and including the well head, to and including pipelines for stabilized products. This International Standard is not applicable to downhole components. Guidance is given for the following: corrosion evaluations; materials selection for specific applications, or systems, or both; performance limitations for specific materials; corrosion control. This International Standard refers to materials that are generally available, with properties that are known and documented. It also allows other materials to be evaluated and qualified for use. This International Standard does not provide detailed material requirements or guidelines for manufacturing and testing of equipment. Such information can be found in particular product and manufacturing standards.

BS EN ISO 21457-2010石油,石化和天然氣工業.油和氣體產品系統的材料選擇和腐蝕控制

This International Standard identifies the corrosion mechanisms and parameters for evaluation whenperforming selection of materials for pipelines, piping and equipment related to transport and processing ofhydrocarbon production, including utility and injection systems. This includes all equipment from and includingthe well head, to and including pipelines for stabilized products. This International Standard is not applicableto downhole components.Guidance is given for the following:- corrosion evaluations;- materials selection for specific applications, or systems, or both;- performance limitations for specific materials;- corrosion control.This International Standard refers to materials that are generally available, with properties that are known anddocumented. It also allows other materials to be evaluated and qualified for use.This International Standard does not provide detailed material requirements or guidelines for manufacturingand testing of equipment. Such information can be found in particular product and manufacturing standards.