印刷機械 上光機檢測

印刷機械 上光機檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 28386-2012印刷、紙加工、造紙機械和輔助設備的噪聲測量方法.準確度等級2和3

本標準規定了在指定的測量條件下測定、標示、驗證GB/T 28387所涉及的印刷、紙加工機械及EN 1034所涉及的造紙、裝訂整飾機械的空氣噪聲發射值的要求；還規定了本標準所采用的噪聲測量方法及測試時的安裝和運行條件。本標準適用于上述機械（例如：在附錄A～附錄I中列出的機器和機器部件）的噪聲發射的測定、標示和驗證。測試報告中建議記錄測量噪聲時與裝配、安裝和運行條件及工作位置的安排有關的所有信息。噪聲發射值包括工作位置的發射聲壓級L<下標p>和機器的聲功率級L<下標w>.本標準指定的噪聲測量方法包括工程法（準確度2級）和簡易法（準確度3級）。使用本標準進行噪聲發射值的測定將確保其在特定范圍內的可重復性。這些范圍由采用的噪聲測量方法的精度等級來確定。測量工作位置和其他指定位置的發射聲壓級由基礎標準（EN ISO 11200:1995、EN ISO 11202：1995、EN ISO 11203：1995和EN ISO 11204：1995）來確立，聲功率級的測量由基礎標準（EN ISO 3740：2000、EN ISO 3744：1995、EN ISO 3746：1995、EN ISO 9614-1：1995和EN ISO 9614-2：1996）來確立。

GB/T 28387.1-2012印刷機械和紙加工機械的設計及結構安全規則.第1部分：一般要求

GB/T 28387的本部分規定了各種印刷、紙加工機械和相關一般設備的安全要求，并應與GB/T 28387-2012中的其他各部分一起使用。GB/T 28387.2-2012～GB/T 28387.5-2012中的特殊要求優先于GB/T 28387.1-2012中的相應要求。本部分涉及在制造商有意的和預知的狀態下，使用印刷機械和紙加工機械所有的常見重大危險。（見第4章）。本部分適用于：紙張印刷或類似材料印刷的印刷機械，包括絲網印刷機械；印刷過程中的準備機械和印刷機械的輔助設備也被視為印刷機械、紙張、印品、印版和油墨（印刷前后）處理的機械，還適用于印刷清洗、質量檢查等機械（輔助印刷機械）。紙加工機械，即紙張、紙板及類似材料的處理、加工或制成品的機械。

GB/T 28387.2-2012印刷機械和紙加工機械的設計及結構安全規則.第2部分：印刷機、上光機和印前機械

GB/T 28387的本部分規定了印刷機、上光機和印前機械及輔助設備的安全要求，本部分應與GB/T 28387.1-2012一起使用，以共同確定在按制造商預定的條件下使用印刷機、上光機和印前機械及輔助設備時的所有重大危險（見第4章）。本部分未涉及由機器的噪聲所引發的危險。這些危險基本包括在GB/T 28387.1-2012中。本部分適用于：——印前機械（用于生產原稿和印版的機械和裝置）；用于生產膠片和印版的曝光設備；用于膠片和印版顯影的設備；用于清洗印版的機器；用于折彎印版的機器；用于膠片和印版打孔的機器；用于裁切膠片和印版的機器；用于生產凹印版材的機器；掃描儀。——印刷機和上光機：打樣機；單張紙印刷機和上光機，包括數字印刷機；卷筒紙平板印刷機和上光機，包括數字印刷機；絲網印刷機。輔助設備：滾筒和輥子清洗裝置；連續工作的烘干裝置；噴粉裝置；供墨和潤濕裝置的輔助裝置；自動夾緊印版裝置；印版、輥子和刮墨刀清洗設備；紙堆翻轉機；測量和控制裝置。本部分不適用于承印物為紡織物的高壓清理裝置和絲網印刷機。

GB/T 28387.4-2012印刷機械和紙加工機械的設計及結構安全規則.第4部分：書籍裝訂、紙加工和整飾機械

GB/T 28387的本部分規定了書籍裝訂、紙加工和整飾機械的安全要求，本部分應與GB/T 28387.1-2012一起使用，以共同確定在按制造商預定的條件下使用書籍裝訂、紙加工和整飾機械時的所有重大危險（見第4章）。本部分中的特殊要求優先于GB/T 28387.1-2012中的相應要求。本部分未涉及由機器的噪聲所引發的危險。這些危險基本包括在GB/T 28387.1-2012中，但本部分規定了像折頁機、生產信封機和衛生產品機的一些降噪措施。本部分適用于：——書籍裝訂機械：訂書、鉚釘、打眼機和裝訂機；騎馬訂書機；配頁機；無線膠訂機；打孔機；書芯壓平機；壓書機；單張紙折頁機；書籍生產線；書芯扒圓起脊機；書背加襯上堵頭機；上封皮機；封皮壓痕成型機。——紙加工機械：信封機；衛生產品生產機；插頁機；計數堆積機；紙張壓痕機。——紙張整飾機械：涂布機；復合機。復合機。

GB/T 28387.5-2012印刷機械和紙加工機械的設計及結構安全規則.第5部分：瓦楞紙板生產機械以及紙板和瓦楞紙板加工設備

GB/T 28387的本部分規定了瓦楞紙板生產機械以及紙板和瓦楞紙板加工設備的安全要求，本部分應與GB/T 28387.1-2012一起使用，以共同確定在按制造商預定的條件下使用瓦楞紙板生產機械及紙板和瓦楞紙板加工設備時的所有重大危險（見第4章）。本部分中的特殊要求優先于GB/T 28387.1-2012中的相應要求。本部分未涉及由機器的噪聲所引發的危險。這些危險基本包括在GB/T 28387.1-2012中，但本部分規定了瓦楞紙板生產機械、加工設備和平壓模切機的降噪要求。本部分適用于瓦楞紙板生產機械以及紙板和瓦楞紙板加工設備；——瓦楞紙板生產機械；——粘箱機；——印刷開槽機，圓壓圓模切機與其組合機（聯機）；——手工給紙平壓模切壓痕機；——自動給紙平壓模切壓痕機；——管式纏繞機。

JB/T 3090-2010印刷機械產品命名與型號編制方法

本標準規定了印刷機械產品命名與型號編制方法的產品的命名、型號編制方法。本標準適用于制版設備、裝訂設備、裁切設備、表面整飾與包裝設備、配套輔助設備等產品，不適用于印刷機。對于本標準未涵蓋的印刷機械的產品應參照執行。

JB/T 4178-2016印刷機術語

本標準規定了各類印刷機及其主要結構部件以及與印刷機質量相關的技術參數的基本術語和定義，以保證在生產、教學和學術等活動中正確應用概念。本標準適用于在印刷機械或相關編寫標準、出版、教學及國內外技術交流中使用。

JB/T 8586-2010印刷機械 上光機

本標準規定了上光機的術語和定義、型式、基本參數、型號和名稱、要求、試驗方法、檢驗規則、標志、包裝、運輸與貯存。本標準適用于單張紙紫外線固化和紅外線干燥的涂布上光機。本標準不適用于局部上光機。

JB/T 9111-2014不干膠標簽印刷機

本標準規定了不干膠標簽印刷機的術語和定義、型式與基本參數、要求、試驗方法、檢驗規則、標志、包裝、運輸與貯存。本標準適用于對各種卷筒不干膠材料進行印刷的、以感光樹脂版或PS版為版材的卷筒料不干膠標簽印刷機。本標準還適用于聯線燙印、覆膜、模切、上光等功能單元的卷筒料不干膠標簽印刷機(以下簡稱標簽印刷機)。

JB/T 11122-2010印刷機械 局部上光機

本標準規定了局部上光機(以下簡稱上光機）的術語和定義、型式、型號與基本參數、要求、試驗方法、檢驗規則及標志、包裝、運輸和貯存。本標準適用于單張紙紫外線固化和紅外線干燥的局部涂布上光機。

JB/T 11947-2014印刷機械 印后設備類別劃分

本標準規定了印刷機械用印后設備的術語和定義、類別劃分原則及各類別設備的劃分。本標準適用于印刷機械用裝訂設備、表面整飾設備和成型加工設備的分類。

JB/T 11948-2014印刷機械 印后機械基本術語

本標準規定了印刷機械用印后機械的產品名稱及其主要結構部件的基本術語,以保證在生產、教學和學術等活動中正確應用概念。本標準適用于印刷機械行業及相關編寫標準、出版、教學、科研及國內外技術交流中使用。

EN 1010-3-2002機械安全.印刷和紙加工機械的設計和施工的安全要求.第3部分:切削機.包含修改件A1-2009

This European Standard applies to cutting machines used in paper converting:guillotines; three-knife trimmers; index cutting machines; trimmers; rotary cutters; round cornering machines; label punching machines. This European Standard is only applicable in conjunction with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of This European Standard take precedence over respective requirements of EN 1010-1:2004+A1. This European Standard is not applicable to cutting machines manufactured before the publication of This European Standard by CEN. This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

EN 1010-4-2004機械安全.印刷和紙加工機械的設計和施工的安全要求.第4部分:裝訂機,紙加工機和修整機.包含修改件A1-2009

This document applies to bookbinding machines: stitching; riveting; eyeletting and attaching machines; gang stitchers; gathering machines; perfect binders; paper drills; book signature presses; book presses; sheet folding machines; book production lines for the production of books with hard covers; back rounding and pressing machines; backlining and head banding machines; casing-in machines; book cover crease forming machines. paper converting machines: machines for the production of envelopes; machines for the production of sanitary items; inserting machines; counter-stackers; paper embossing machines. paper finishing machines: coaters; laminators.This document shall be used together with "EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to bookbinding; paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-4 take precedence over respective requirements in "EN 1010-1:2004+A1".This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in "EN 1010-1:2004+A1". However; for machines like sheet folding machines and machines for the production of envelopes and sanitary items; some specific proposals for noise reduction measures are given.This document is not applicable to bookbinding; paper converting and finishing machines manufactured before the date of publication of this document by CEN.

EN 1034-1-2000機械安全.造紙機械和精整機的設計和建造安全要求.第1部分:通用要求.包含修改件A1-2010

This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from EN 1034-1 in which case the specific stipulations take precedence over the specification made in EN 1034-1. The standard deals with the hazards listed in 4.This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5.This standard applies to machines produced after............. (date of CEN approval).

EN 13023-2003印刷,紙張吹煉,造紙機械及附屬設備的噪聲測量法.2類和3類準確度;包含修改件A1-2010

This standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of airborne noise emission from printing and paper converting machines covered by the EN 1010 series and from paper making and finishing machines covered by the EN 1034 series. It specifies noise measurement methods and installation and operating conditions to be used for the test.This standard applies to those machines listed in the normative annexes A to J. The principles of this noise test code should be applied as far as possible also for the determination of noise emission of machines and machine parts not listed in the normative annexes A to J. In such cases, all information relating to assembly, installation and operating conditions as well as the arrangement of work stations should be recorded and reported in the test report. Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. Declared noise emission values permit comparison of printing and paper machines on the market. The use of this noise test code ensures the reproducibility of the determination of the characteristic noise emissions within specific limits. These limits are determined by the accuracy grade of the noise measuring method used. Noise measurements specified byThis standard are carried out by the engineering method (accuracy grade 2) and the survey method (accuracy grade 3).

BS EN 1010-2-2006+A1-2010機械安全性.印刷機和換紙機的設計和構造的安全性要求.包括預壓機械的印刷機和涂漆機

This document applies to:? Pre-press machinery (machinery and devices for the production of master copies and printing forms):? exposure equipment for the production of films and printing forms;? equipment for developing films and printing forms;? washing machines for printing forms;? machines for bending printing forms;? punching machines for film and printing forms;? cutting machines for film and printing forms;? machines for the production of gravure printing forms;? scanners.? Printing and varnishing machines:? proofing presses;? sheet-fed printing presses and varnishing machines including digital printing presses;? web-fed rotary presses and varnishing machines including digital printing presses;? screen printing presses.? Auxiliary devices:? cylinder and roller washing devices;? continuous flow drying devices;? powder spraying devices;? auxiliary devices on inking and damping units;? automatic plate clamping devices;? washing equipment for printing forms, rollers and scrapers;? pile turners;? measuring and control devices.This document shall be used together with !EN 1010-1:2004+A1". Both parts together identify allsignificant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause4). The specific requirements specified in prEN 1010-2 take precedence over respective requirements in thisstandard.This document does not deal with risks generated by noise emitted from the machines. These issues arefundamentally covered in !EN 1010-1:2004+A1"This document does not apply to high-pressure cleaning devices and screen printing presses for textilesubstrates.This document is not applicable to printing and varnishing machines including pre-press machinery which aremanufactured before the date of publication of this document by CEN.

BS EN 1010-3-2002+A1-2009機械安全性.印刷和紙加工機械的設計和制造的安全性要求.切紙機

1.1 This European Standard applies to cutting machines used in paper converting:- guillotines;- three-knife trimmers;- index cutting machines;- trimmers;- rotary cutters;- round cornering machines;- label punching machines.This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts togetheridentify all significant hazards relevant to the cutting machines when they are used as intended and under theconditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard takeprecedence over respective requirements of !EN 1010-1:2004+A1".This European Standard is not applicable to cutting machines manufactured before the publication of this EuropeanStandard by CEN.1.2 This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN1034-5).