便攜式移動電源產品檢測

便攜式移動電源產品檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 9813.2-2016計算機通用規范 第2部分:便攜式微型計算機

GB/T 9813的本部分規定了便攜式微型計算機（以下簡稱：產品）的技術要求、試驗方法、質量評定程序及標志、包裝、運輸和貯存等。本部分適用于產品的設計和制造。本部分是制定產品標準的依據。

GB/T 31023-2014移動實驗室 設備工況測試通用技術規范

本標準規定了設備工況測試移動實驗室的術語和定義、分類和代號、要求、試驗方法、檢驗規則、標志、包裝、運輸及貯存。本標準適用于各種陸路使用的機械設備在工況條件下進行檢測的移動實驗室。

GB 31241-2022便攜式電子產品用鋰離子電池和電池組 安全技術規范

本文件規定了便攜式電子產品用鋰離子電池和電池組的安全要求和試驗方法。本文件適用于便攜式電子產品用的鋰離子電池和電池組(以下簡稱為電池和電池組)，屬于本文件范圍內的便攜式電子產品示例如下：a)　便攜式辦公產品：筆記本電腦、平板電腦等；b)　移動通信產品：手機、無繩電話、對講機等；c)　便攜式音/視頻產品：便攜式電視機、便攜式音/視頻播放器、照相機、攝像機、錄音筆、藍牙耳機、便攜式音箱等；d)　其他便攜式產品：電子導航器、數碼相框、游戲機、電子書、移動電源、便攜式儲能電源、便攜式投影儀、可穿戴設備等。與上述示例類似用途的鋰離子電池和電池組可參考使用本文件。對于在車輛、船舶、飛機上等特定場合使用，以及對于醫療、采礦、海底作業等特殊領域使用的便攜式電子產品用鋰離子電池或電池組可能會有附加要求。本文件不適用于電子煙用鋰離子電池和電池組。

GB/T 35590-2017信息技術 便攜式數字設備用移動電源通用規范

本標準規定了便攜式數字設備用移動電源(以下簡稱“移動電源”)的要求、試驗方法、質量評定程序以及標志、包裝、運輸和貯存。本標準適用于便攜式數字設備用的輸入電壓不大于250 V，輸出直流電壓不大于60 V，單端口輸出電流不大于5 A，采用有線輸出方式的移動電源。

GB/T 36095-2018信息技術 學習、教育和培訓 電子書包終端規范

本標準規定了電子書包終端的技術要求、試驗方法、質量評定程序、標志、包裝、運輸和貯存的要求。本標準適用于各種類型的電子書包終端的設計、制造、測試和驗收。

CJJ 207-2013城鎮供水管網運行、維護及安全技術規程

本規程適用于城鎮供水管網、總表后的埋地管網、自備水源的供水管網和農村集中式供水管網的運行、維護及安全技術管理。

YD/T 2960-2015移動互聯網術語

本標準規范了移動互聯網領域的術語和定義。本標準適用于移動互聯網領域。

DL/T 1033.10-2016電力行業詞匯 第10部分:電力設備

本部分規定了電力設備的名詞詞匯。本部分適用于電力行業工作人員、高等院校師生在對外交流、定貨、簽訂合同、設備驗收和學術交流時使用。

UL 399-2008飲用水冷卻器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

BS EN 13534-2006+A1-2010食品加工機械.食品加工填料機.安全性和衛生要求

1.1 This standard applies for? curing injection machines with infeed and outfeed devices;? curing injection machines with infeed and outfeed devices and loading devices.This standard does not apply to portable/hand guided curing injection devices.!deleted text"This document deals with all significant hazards, hazardous situations and events relevant to curing injectionmachinery when they are used as intended and under conditions of misuse which are reasonably foreseeableby the manufacturer (see Clause 4).This document is not applicable to curing injection machines which are manufactured before the date ofpublication of this document by CEN.1.2 This standard covers the following types of curing injection machines:Curing injection machines consist mainly of a single or multilane curing needle station, holding down clamp,infeed and outfeed devices, machine frame and related drive system, and electrical, electronic, or pneumaticcomponents, depending on machine type.Curing injection machines in the scope of this standard can be equipped with:? infeed chute;? splash guard flaps;? single or multi-lane curing needle bars (needle station);? holding down clamp;? infeed and outfeed conveyor belt;? infeed and outfeed rake;? interlocked transport car at the outfeed side;? loading device with delivery chute.The product being processed (raw meat, game or raw fish) is fed by hand to the infeed device of the curinginjection machine. The infeed device transports the product to the needle station; the product is then pressedagainst the infeed device by a holding down clamp. The needles of the needle station inject the curing liquid orother fluids into the product. The outfeed device then transports the product away from the needle station.This standard also covers the loading devices, which can be necessary in the case of machines with highcapacity and/or great height.Curing injection machines in the scope of this standard can be stationary or mobile.1.2.1 Curing injection machines with single or multi-lane curing needle bars, infeed and outfeed device atthe infeed and outfeed side (see Figure 1).The distance A between the floor/ standing position and the infeed surface of the infeed and outfeed device is> 750 mm.