化學試劑 六水合氯化鎂檢測

化學試劑 六水合氯化鎂檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 601-2016化學試劑 標準滴定溶液的制備

本標準規定了化學試劑標準滴定溶液的配制和標定方法。本標準適用于以滴定法測定化學試劑純度及雜質含量的標準滴定溶液配制和標定。其他領域也可選用。

GB/T 672-2006化學試劑 六水合氯化鎂(氯化鎂)

本標準規定了化學試劑 六水合氯化鎂的規格、試驗、檢驗規則和包裝及標志。 本標準適用于化學試劑 六水合氯化鎂的檢驗。

GB/T 5548-2007樹脂整理劑 加催化劑后 溶液穩定性的測定

本標準規定了樹脂整理劑加催化劑后溶液穩定性的測定方法。 本標準適用于樹脂整理劑加催化劑后溶液穩定性的測定。

GB/T 19746-2018金屬和合金的腐蝕 鹽溶液周浸試驗

本標準規定了一種在鹽溶液中有、無外加應力下通過周浸試驗來評估金屬耐蝕性的方法。本標準適用于包括鋁合金和鋼鐵材料在內的金屬在制造過程中的質量控制，也適用于合金研發過程中的評定。根據試驗溶液的化學成分，本標準可模擬海水飛濺區、除冰液和酸性鹽環境的腐蝕效應。本標準中術語“金屬”包括有或沒有防腐層的金屬材料。周浸試驗適用于：——金屬及其合金；——某種金屬覆蓋層(相對于基體是陰極性和陽極性覆蓋層)；——某種轉化膜；——某種陽極氧化層；——金屬表面的有機涂層。

DIN EN 14562-2006化學消毒劑和防腐劑.評估醫學領域用器械滅真菌或酵母菌作用的定量病媒試驗.試驗方法和要求(第2階段，第2步)

This EN specifies a test method (phase 2/step 2) and requirements for the minimum fungicidal and yeasticidal activity of chemical disinfectants products that form a homogeneous, physically stable preparation in hard water and that are used for instrument disinfection in the medical area whether this instruments are defined as medical devices or not. This includes products used for the disinfection of surgical instruments, anaesthetic equipment, endoscopes etc. which are disinfected by immersion into the product.

BS EN 14348-2005化學消毒劑和防腐抗菌劑.評定包括儀器消毒劑在內的醫用化學消毒劑滅分支桿菌活性用定量懸浮試驗.試驗方法和要求(階段2,步驟1)

This document specifies a test method and the minimum requirements for mycobactericidal (or tuberculocidal) activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water - or in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and interfering substance.nThis document applies to products that are used in the medical area including those that are covered by the EEC/93/42 Directive on Medical Devices.nThis document applies to areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example:nin hospitals, in community medical facilities and in dental institutions; nin clinics of schools, of kindergartens and of nursing homes;nand may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients.nNOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used.nNOTE 2 This method corresponds to a phase 2, step 1 test (see Annex E).

BS EN 14561-2006化學消毒劑和防腐劑.評估醫學領域用器械滅菌作用的定量病媒試驗.試驗方法和要求(第2階段，第1步)

This European Standard specifies a test method and the minimum requirements for bactericidal activity ofchemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hardwater – or in the case of ready-to-use products – with water.This European Standard applies to products that are used in the medical area for disinfecting instruments byimmersion – even if they are not covered by the EEC/93/42 Directive on Medical Devices.This European Standard applies to areas and situations where disinfection is medically indicated. Suchindications occur in patient care, for example:? in hospitals, in community medical facilities and in dental institutions;? in clinics of schools, of kindergardens and of nursing homes;? and may occur in the workplace and in the home. It may also include services such as laundries andkitchens supplying products directly for the patients.NOTE This method corresponds to a phase 2, step 2 test (see Annex E).

BS EN 14562-2006化學消毒劑和防腐劑.評估醫學領域用器械滅真菌或酵母菌作用的定量病媒試驗.試驗方法和要求(第2階段，第1步)

This European Standard specifies a test method and the minimum requirements for fungicidal or yeasticidalactivity of chemical disinfectant products for instruments that form a homogeneous, physically stablepreparation when diluted with hard water – or in the case of ready-to-use products – with water.This European Standard applies to products that are used in the medical area for disinfecting instruments byimmersion – even if they are not covered by the EEC/93/42 Directive on Medical Devices.This European Standard applies to areas and situations where disinfection is medically indicated. Suchindications occur in patient care, for example:? in hospitals, in community medical facilities and in dental institutions;? in clinics of schools, of kindergardens and of nursing homes;and may occur in the workplace and in the home. It may also include services such as laundries and kitchenssupplying products directly for the patients.NOTE This method corresponds to a phase 2, step 2 test (see Annex E).