螺桿活塞串聯壓縮機組檢測

螺桿活塞串聯壓縮機組檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 26921-2011電機系統（風機、泵、空氣壓縮機）優化設計指南

本標準規定了電機系統設計的基本要求，電動機選型，電動機調速方式和調速裝置的選擇，以及風機系統、泵系統、空氣壓縮機系統的優化設計和評價。本標準適用于電機系統（風機、泵、空氣壓縮機）的節能優化設計和評價。

GB 50350-2015油田油氣集輸設計規范

本規范適用于陸上油田、灘海陸采油田和海上油田陸岸終端油氣集輸工程設計。

GB 50771-2012有色金屬采礦設計規范

本規范適用于新建、改建、擴建的有色金屬礦山預可行性研究、可行性研究和礦山工程建設的采礦設計。

GB/T 51007-2014石油化工用機泵工程設計規范

本規范適用于石油化工用機泵的工程設計。

GB 51084-2015有色金屬工程設備基礎技術規范

本規范適用于有色金屬工程采礦、選礦、冶煉、加工等生產系統的設備基礎工程的設計、施工及驗收。本規范不適用于配置在樓板上的動力機器基礎，以及各種冶煉爐、窯、煙囪基礎工程的設計、施工及驗收。

MT 950-2005煤礦井下空氣壓縮機安全技術檢驗規范

本標準規定了煤礦井下空氣壓縮機的分類、安全技術要求、試驗方法、檢驗規則和標志。 本標準使用于煤礦井下空氣壓縮機(以下簡稱空氣壓縮機)。

QB/T 6003-2015真空制鹽工業設備安裝工程施工及驗收規范

本規范適用于新建、擴建、改建、遷建及設備大修的真空制鹽工廠整體安裝設備和現場組焊設備安裝工程施工及驗收，包括鹵水凈化、蒸發結晶、脫水、干燥、包裝、儲運工序和副產品芒硝及石膏等的生產設備以及與之配套的循環水設備。其他類似采用真空蒸發制鹽工藝及裝置生產的無機鹽(如芒硝)的設備安裝工程施工及驗收亦可參照本規范執行。熱壓制鹽工程的施工及驗收參照本規范執行。本規范未包括供熱、發電、機修、供水(不含制鹽循環水)、自控、電氣等和國外設備的安裝，其施工及驗收，應按有關現行或行業標準的規定和國外隨機技術條件(含設計圖)的規定執行。本規范涉及的管道安裝工程，其施工與驗收，應按現行標準GB 50235《工業金屬管道工程施工規范》、GB 50184《工業金屬管道工程施工質量驗收規范》和GB 50236《現場設備、工業管道焊接工程施工規范》的相關規范規定執行。本規范所引用的標準，凡是注日期的引用標準，僅所注日期的版本適用于本規范。凡是不注日期的引用標準，其新版本(包括所有的修改單)適用于本規范。

HJ 2020-2012袋式除塵工程通用技術規范

本標準規定了袋式除塵工程設計、施工與安裝、調試與驗收、運行與維護的通用技術要求。本標準適用于各種規模的袋式除塵工程，可作為環境影響評價、環境保護設施設計與施工、環境保護驗收及建成后運行與管理的技術依據。本標準所提出的技術要求具有通用性，特殊性要求可執行相關行業的除塵工程技術規范。電袋復合除塵工程可參照?qǐng)?zhí)行。本標準不適用于煤氣凈化袋式除塵工程。

JB/T 12564-2015螺桿活塞串聯壓縮機組

本標準規定了螺桿活塞串聯壓縮機組（以下簡稱串聯機組）的術語和定義、型號和基本參數、要求、試驗方法、檢驗規則、標志、包裝和貯存。本標準適用于電動機驅動的固定式和橇裝式，壓縮介質為空氣，冷卻方式為水冷，驅動電動機總功率不大于1 000 kW，額定排氣壓力不大于45 MPa的串聯機組。柴油機驅動的串聯機組、拖移式串聯機組和車裝式串聯機組可參照本標準執行。

DIN EN 1012-3-2014壓縮機和真空泵. 安全要求. 第3部分:加工壓縮機; 德文版本EN 1012-3-2013

This part of EN 1012 is applicable to compressors having an operating pressure greater than 0,5 bar and designed to utilise all gases other than air, nitrogen or inert gases which are covered in part 1. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.This part of EN 1012 includes under the general term compressors, those machines which comprise;- the compressor itself- a prime mover- any component or device supplied which is necessary for safe operation of the compressor.In addition it applies to partly completed compressors having a compressor in combination with some of these components as well as compressor assemblies operating in combination.Excluded are refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378-1.

DIN EN ISO 10439-1-2015石油, 石化和天然氣工業. 軸向和離心式壓縮機以及膨脹機-壓縮機. 第1部分: 通用要求 (ISO 10439-1-2015); 英文版本EN ISO 10439-1-2015, 僅有CD-ROM格式文件

This International Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expandercompressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of ISO 10439 specifies general requirements applicable to all such machines. This International Standard does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. This International Standard also does not apply to packaged, integrally geared centrifugal plant, and instrument air compressors, which are covered by API 672. Hot gas expanders over 300 °C (570 °F) are not covered by this International Standard. This part of ISO 10439 contains information pertinent to all equipment covered by the other parts of ISO 10439. It shall be used in conjunction with the following parts of ISO 10439, as applicable to the specific equipment covered: - ISO 10439-2; - ISO 10439-3; - ISO 10439-4.

DIN EN ISO 10440-1-2008石油、石化和天然氣工業.旋轉型容積式壓縮機.第1部分:加工壓縮機

This part of ISO 10440 specifies requirements for dry and oil-flooded, helical-lobe rotary compressors (seeFigure 1) used for vacuum or pressure or both in petroleum, petrochemical, and gas industry services. It isintended for compressors that are in special-purpose applications.It is not applicable to general-purpose air compressors, liquid-ring compressors, or vane-type compressors.NOTE Standard air compressors are covered in ISO 10440-2.