分揀機器人檢測

分揀機器人檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 19597-2004核設施退役安全要求

本標準規定了核設施退役的安全目標、管理原則、輻射安全、退役廢物安全和工業安全要求等內容。 本標準主要涉及的是與核設施退役相關的輻射危險，不直接涉及退役活動中可能產生的非輻射危險。 本標準適用于非事故關閉的核設施退役，因事故而關閉的核設施的退役可參照執行。本標準不適用于停閉的鈾、釷礦冶尾礦庫、廢石場、堆渣場、廢礦井的整治和放射性廢物處置設施的關閉。

GB/T 36239-2018特種機器人 術語

本標準界定了與特種機器人相關的基本名詞、術語和定義。本標準適用于特種機器人的設計、生產、售后、科研、教學、管理等領域。

GB/T 36321-2018特種機器人 分類、符號、標志

本標準規定了特種機器人的分類、通用符號與標志。本標準適用于特種機器人，便于在制造、使用、維護的過程中對其進行識別和管理。

GB/T 37393-2019數字化車間 通用技術要求

本標準規定了數字化車間的體系結構、基本要求、車間信息交互、基礎層數字化要求、工藝設計數字化要求、車間信息交互、制造運行管理數字化要求等內容。本標準適用于指導離散制造領域數字化車間的規劃、建設(新建或改建)、驗收和運營。

GB/T 37710-2019糧食物流名詞術語

本標準界定了糧食物流活動中的基礎術語和糧食物流技術、設施設備、信息、經濟與管理的術語及其定義。本標準適用于與糧食物流相關的生產、運營、貿易、管理、科研、教學等領域。

GB/T 38873-2020分揀機器人通用技術條件

本標準規定了用于工業環境下的分揀機器人的分類、技術要求、檢驗方法、檢驗規則、成套性標志、包裝、運輸和貯存。本標準適用于分揀機器人(以下簡稱“機器人”)。

WS 712-2012倉儲業防塵防毒技術規范

本標準規定了倉儲業防塵防毒的技術要求和管理措施。本標準適用于儲存各類物品的庫房、貨場、貨棚、儲罐等作業過程中粉塵、毒物危害控制的工程技術和管理，也適用于相關部門對倉儲作業過程中粉塵、毒物危害的監督。

YC/T 9-2015卷煙廠設計規范

本標準規定了卷煙廠設計的技術要求。本標準適用于卷煙廠技術改造工程設計。

YC/T 384.2-2018煙草企業安全生產標準化規范 第2部分:安全技術和現場規范

YC/T 284的本部分規定了煙草企業安全生產標準化的安全技術和現場規范要求，包括設備設施、作業活動、作業環境和現場運行的安全要求。本部分適用于省級煙草公司(局)、省級工業公司等省級公司、煙草加工和煙草商業生產經營單位。其中，煙草商業生產經營單位特指地市級煙草公司，煙草加工單位含煙葉復烤、卷煙制造、雪茄煙制造、再造煙葉生產的單位。煙草配套和多元化投資的其他生產經營單位，如醋酸纖維、煙草印刷等單位可參照執行。

UL 1740-2007機器人和自動設備

These requirements cover robots and robotic equipment rated 600 V or less and intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70. Since end-use installation of a robot and robotic equipment may vary for each user application, guidelines for end-product installation may be evaluated to the applicable sections of ANSI/RIA R15.06, Standard for Industrial Robots and Robot Systems-Safety Requirements. Portions of the requirements in this Standard have been excerpted from the Robotic Industries Associations (RIA) Standard for Industrial Robots and Robot Systems - Safety Requirements, ANSI/RIA R15.06. These requirements cover robotic equipment and systems intended for indoor and outdoor use in applications such as parts assembly, parts transfer, automated material handling, inspection, loading, diecasting, deburring, welding, paint spraying, clinical/diagnostic systems, pharmaceutical applications, commercial food processing, automated vehicle refueling systems, library book handling/sorting, clean room applications, medical use for surgery, mobile robots, automated guided vehicles, automated storage/retrieval systems, and the like. Unique features or functions associated with the robotic application, not specifically addressed in this Standard, shall also be evaluated to other applicable Standards/requirements. These may include, but are not limited to, Electrical Equipment for Laboratory Use; Part 1: General Requirements, UL 3101-1; Medical and Dental Equipment, UL 544; Power Operated Pumps for Petroleum Product Dispensing Systems, UL 79. In addition to the requirements in this Standard, robots and robotic systems shall also comply with the applicable sections of the Electrical Standard for Industrial Machinery, ANSI/NFPA 79. Robots and robotic systems intended for use in hazardous locations, as defined by the National Electrical Code ANSI/NFPA 70, shall also comply with the requirements in Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, UL 913. In the following text, a requirement that applies to one type of equipment, such as a controller or teach pendant, will be identified by a specific reference. In the absence of a specific reference or if the term robot or robotic equipment is employed, it is to be understood that the requirement applies to all types of equipment covered by this Standard.

EN ISO 11161-2007機械安全.集成制造系統.基本要求.包含修改件A1-2010

This International Standard specifies the safety requirements for integrated manufacturing systems (IMS) that incorporate two or more interconnected machines for specific applications, such as component manufacturing or assembly. It gives requirements and recommendations for the safe design, safeguarding and information for the use of such IMSs (see Figure 1 for the basic configuration of an IMS).

NF E63-704-2009機械的安全性.鑄造機器和設備用噪音試驗規程

Le présent code d'essai spécifie toutes les informations qui sont nécessaires pour effectuer d'une manière efficace et dans des conditions normalisées la détermination, la déclaration et la vérification des valeurs d'émission sonore de plusieurs familles de machines de fonderie. Il spécifie les méthodes de mesurage qui sont disponibles ainsi que les conditions de fonctionnement et de montage qui doivent être utilisées pour l'essai.Les grandeurs caractéristiques de l'émission sonore sont le niveau de pression acoustique d'émission à la position de l'opérateur ainsi que le niveau de puissance acoustique. La détermination de ces quantités est nécessaire pour :- les fabricants en vue de la déclaration des valeurs d'émission sonore ;- la comparaison des valeurs d'émission sonore de familles spécifiques de machines et d'équipements ;- la réduction du bruit à la source au stade de la conception.L'emploi de ce code d'essai garantit la reproductibilité de la détermination des valeurs d'émission sonore dans les limites fixées par la classe de précision de la norme de base employée pour le mesurage. Ce code d'essai permet l'emploi de méthodes de classe 2 (expertise) et de classe 3 (contr?le).Elle comprend une partie principale donnant des spécifications générales communes aux machines de fonderie et six annexes normatives spécifiques aux familles de machines de fonderie dont la liste suit :- machines pour noyautage ;- machines pour le moulage ;- grilles de décochage et tables de décochage ;- machines de grenaillage par turbine (sans restriction au domaine de la fonderie)- machines de grenaillage par air comprimé ;- machines à coulée sous pression.Six annexes informatives donnent des informations concernant la détermination des conditions de fonctionnement spécifiques.La partie principale de ce code sert aussi de guide pour le mesurage de l'émission sonore des machines de fonderie qui ne sont pas traitées dans les annexes.

NF P19-201-3-2008建筑工程.樓板用混凝土中預制空心板.第3部分:計算規則

Le présent document définit les règles de calcul des planchers à dalles alvéolées préfabriquées en béton armé ou précontraintes pour des ouvrages de batiment et de génie civil, tels que définis à l'article 1 de la norme NF DTU 23.2 P1-1.Le présent document précise l'application de certaines annexes informatives de la norme NF EN 1168 et apporte des compléments pour leur application. Ces annexes deviennent, à ce titre, normatives pour tout ou partie.Dans le cas particulier de dalle alvéolée devant supporter une charge ponctuelle apportée par un poteau, la liaison doit faire l'objet d'une étude spécifique réalisée par le BET structure de l'entreprise de gros oeuvre. La disposition constructive retenue (caractéristiques de la liaison et mode opératoire) doit être validée par le fournisseur des dalles alvéolées.

DIN 8784-2013飲料灌裝線.基本的與定貨有關規范

This standard is meant to support the exchange of technical data between supplier and customer where design and technology are concerned as well as those boundary conditions and interfaces that have to be taken into account. The document can be used analogously for machinery and plant for other products similar to beverages when these have to comply with comparable requirements. This standard is valid for machinery for bottle or can bottling and also for those machines listed in the annex that are used in related operations directly before or after the task. The scope of the standard does not include machinery or plant for the processing or preprocessing of beverages. This standard does not determine any safety requirements.

DIN EN 415-1-2014打包機的安全.第1部分:打包機及相關設備的專用術語和分類,德文版本EN 415-1-2014

This European standard defines the field of packaging machines in detail, but briefly these are: Filling and Dosing machines; closing machines; labelling, decorating and coding machines; cleaning, sterilising, cooling and drying machines; fill and seal machines; inspection machines; container and component handling machines; form, fill and seal machines; cartoning machines; wrapping machines; group or transit packaging machines; pallet or loading unit forming, dismantling and securing machines.

DIN EN ISO 11161-2010機械安全性.集成制造系統.基本要求(ISO 11161-2007+Amd 1-2010).德文版本EN ISO 11161-2007+A1-2010

This International Standard specifies the safet requiements for integrated anufacturing systems (IMS)that incorporate two or more interconnected machines for specific applications.

BS EN 415-7-2006+A1-2008包裝機械安全.組件和二次包裝機械

This European Standard applies to the following groups of machines:Group and secondary packaging machines and the collating systems associated with them.The individual machines are described in 3.2 of this European Standard.This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of group and secondary packaging machines.The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4.Exclusions This European Standard is not applicable to the following machines:-machines that were manufactured before the date of publication of this document by CEN;-strapping machines. These machines are covered by EN 415-8;-crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by EN 415-2;-cartoning machines. Cartoning machines are covered by EN 415-3.This European Standard does not consider the following hazards:-use of group and secondary packaging machines in potentially explosive atmospheres;-health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;-hazards that may be associated with electromagnetic emissions from group and secondary packaging machines;-hazards that may be associated with decommissioning group and secondary packaging machines.

BS EN 14943-2005運輸服務.后勤學.術語表

This European Standard establishes definitions for commonly used terms in logistics. It encompasses all aspects of logistics and supply chain management including transport. The terms, with their definitions, are presented in strict alphabetical order with no attempt to relate them to any particular function within the logistics concept.