綠色產品 紙和紙制品檢測

綠色產品 紙和紙制品檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 35601-2017綠色產品評價 人造板和木質地板

本標準規定了人造板和木質地板綠色產品評價的術語和定義、評價要求、檢驗方法和評價方法。本標準適用于室內用人造板和木質地板綠色產品評價。

GB/T 35604-2017綠色產品評價 建筑玻璃

本標準規定了建筑玻璃綠色產品評價的術語和定義、評價要求和評價方法。本標準適用于建筑用鋼化玻璃、夾層玻璃、中空玻璃的評價。

GB/T 35607-2017綠色產品評價 家具

本標準規定了家具產品的綠色產品評價要求和評價方法。本標準適用于所有家具產品。

GB/T 35608-2017綠色產品評價 絕熱材料

本標準規定了絕熱材料綠色產品評價的術語和定義、評價要求、檢驗方法、指標計算方法和評價方法。本標準適用于建筑用巖棉、玻璃棉、模塑聚苯乙烯泡沫塑料、柔性泡沫橡塑、泡沫玻璃等絕熱材料的綠色產品評價。

GB/T 35609-2017綠色產品評價 防水與密封材料

本標準規定了綠色建筑防水與密封材料的術語和定義、評價要求、評價方法。本標準適用于建筑防水卷材、防水涂料和密封膠的綠色產品評價。

GB/T 35611-2017綠色產品評價 紡織產品

本標準規定了綠色紡織產品的評價指標和評價方法。本標準適用于各類紡織產品，包括纖維、紗線、織物、制品及其附件。

GB/T 35612-2017綠色產品評價 木塑制品

本標準規定了木塑制品綠色產品評價的術語和定義、評價要求、判定依據和判定規則。本標準適用于綠色木塑制品的產品評價。

GB/T 35613-2017綠色產品評價 紙和紙制品

本標準規定了紙和紙制品的綠色產品評價要求和評價方法。本標準適用于企業自主生產的生活用紙、生活用紙制品及裝飾用紙的綠色產品評價，不適用于企業委托加工生產的生活用紙、生活用紙制品及裝飾用紙的綠色產品評價。

GB/T 37422-2019綠色包裝評價方法與準則

本標準規定了綠色包裝評價準則、評價方法、評價報告內容和格式。本標準適用于綠色包裝的評價，也適用于各類綠色包裝評價規范的編制。

GB/T 37866-2019綠色產品評價 塑料制品

本標準規定了塑料制品綠色評價要求和評價方法。本標準適用于所有塑料制品。

GB/T 50878-2013綠色工業建筑評價標準

本標準適用于新建、擴建、改建、遷建、恢復的建設工業建筑和既有工業建筑的各行業工廠或工業建筑群中的主要生產廠房、各類輔助生產建筑。本標準規定了各行業評價綠色工業建筑需要達到的共性要求。

EN 12629-1-2000制作混凝土和硅酸鈣結構產品的設備的安全性.第1部分:通用要求

This European Standard applies to machines for the manufacture of constructional products from concrete and/or calcium silicate examples of which are listed in annex A of this part. It gives concepts and general and common requirements for the design; operation and maintenance of such machines.This European Standard deals with hazards listed in Clause 4 which can arise during the operation and maintenance; including the interfaces; of the machines for the manufacture of constructional products from concrete and calcium silicate; when carried out as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. Part 2 to 8 of this standard give additional specific requirements and therefore have to be applied together withThis part. The preparation of concrete and/or calcium-silicate mixture and the transport from the mixer to the manufacturing plant are not part of this European Standard (see EN 12151:2007). The equipment for the transport and handling of formed products; other than the integrated transport system; is not covered byThis standard. At the time of drafting; machine specific noise test codes for EN 12629-2 to-8 are not available to fulfill the requirements of 5.7.2 and 7.4.2. When they are available; they will be incorporated in these standards.This document is not applicable to machines for the manufacture of constructional products from concrete and/or calcium silicate; which are manufactured before the date of publication of this document by CEN.

EN 12629-3-2002制作混凝土和硅酸鈣結構產品的機械的安全性.第3部分:滑動和轉臺機械

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is(are) mounted on a turning or slide table. The motive power for compressing the mixture is effected either mechanically (Annexes A, B), or hydraulically (Annexes C and D). EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate.This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 of annexes A, B, C, D) and the point where the pallets for concrete products are brought to the assembly (see point 8 at annexes C and D) until the point where the green products are removed from the machine to the curing system (see point 2 of annexes A, B, C, D).This European Standard deals with the hazards listed in Clause 4 which can arise during the operation and maintenance, including the interfaces, of the slide and turntable machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative.This standard establishes safety requirements and/or methods of protection which apply to these machines.This document is not applicable to side and turntable machines, which are manufactured before the date of publication of this document by CEN.

EN 12629-6-2004生產混凝土和硅酸鹽建筑產品用機器.安全.第6部分:生產預制加筋產品的固定和移動設備

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to stationary and mobile equipment for the manufacture of precast reinforced products as defined in Clause 3 and applies to these machines also when used for the manufacture of non-reinforced moulded products. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate.This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.This document applies to the modules comprising production machines (with or without turnover demoulding) for the manufacturing of reinforced moulded products as shown below and illustrated in informative Annexes A and B. NOTEThis machinery can consist of three modules and they are generally designed to obtain a large moulding capacity (middle length of the products from 3 to 4 meters), with a limit height of demoulding of 1 m and a maximum width of 1,50 m. Module A: Manufacturing machines by vibration or compression and floating, with or without turnover. Module B: Stocking/hardening unit. Module C: Assembly for palletising/packaging of the concrete products.This module also permits the inspection of the products. These machines are designed to perform the following cyclic operations: manufacturing by vibration and even compression (oiling, mould feeding-concrete + reinforcement-, vibration, floating, interlocking, turnover, removing from mould); storage of moulds and pallet boards for concrete hardening; products destacking and packaging; moulds and pallet boards return to the manufacturing module. Any of these operations may be manual, semi-automatic or automatic.This document deals with automatic and semi-automatic operations of modules A and C and with automatic operations of module B. There are two main types of stationary and mobile equipment for manufacture of precast reinforced products: equipment with instant removing from mould on pallet boards or on the floor; equipment with delayed removing from mould (collection of moulds: the concrete products are hardened in the mould).This standard does not deal with the machines for: mixing of concrete; manufacturing of the reinforcing steel; evacuation of the products to the stockyard; manufacturing of products (e. g. slabs or blocks) covered by other parts of EN 12629. Annex A shows the most common types of units as well as their variations: immediate demoulding unit and delayed demoulding unit.This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.This document is not applicable to stationary and mobile equipment for the manufacture of precast products, which are manufactured before the date of publication of this document by CEN.

DIN EN 12629-1-2011生產混凝土和硅酸鈣建筑產品用機器.安全.第1部分:一般要求;德文版本EN 12629-1-2000+A1-2010

This European Standard applies to machines for the manufacture of constructional products from concrete and/or calcium silicate examples of which are listed in Annex A of this part. It gives concepts and general and common requirements for the design, operation and maintenance of such machines.

DIN EN 12629-3-2011混凝土和硅酸鈣結構產品生產設備.安全性.第3部分:滑式和轉盤機;德文版本EN 12629-3-2002+A1-2010

This part of EN 12629, taken together with EN 12629-1-2000+A1-2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is (are) mounted on a turning or slide table. The motive power for compressing the mixture is effected either mechanically (Annexes A,B),or hydraulically(Annexes C and D).