供水設施的裝置和設備檢測

供水設施的裝置和設備檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 24293-2009數控恒溫水嘴

本標準規定了數控恒溫水嘴的術語和定義、分類和標記、使用條件、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于公稱壓力不大于0.6MPa、熱水溫度不大于85℃，安裝在盥洗室(洗手間、浴室)、廚房、醫院、賓館等使用場所，出水溫度受預設溫度控制的數控恒溫水嘴。

CJ/T 406-2012不銹鋼水嘴

本標準規定了不銹鋼水嘴（以下簡稱水嘴）的分類、產品結構、材料、配套裝置、要求、試驗方法、檢驗規則、標志、合格證書和使用說明書、包裝、運輸和貯存。本標準適用于公稱尺寸不大于DN20、公稱壓力不大于0.6MPa、介質溫度不大于90℃的不銹鋼水嘴。

SN/T 1503-2005國境衛生檢疫標準編寫基本規則術語和定義

本標準規定了國境衛生檢疫行業中常見術語的定義或涵義。 本標準適用于國境衛生檢疫行業標準的編寫和實施。

ISO 3822-1-1999聲學 供水設施的裝置和設備發射的噪聲的實驗室測試 第1部分:測量方法

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.nThe items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances".nThe method specified makes it possible to obtain comparable results of measurements in different laboratories.

ISO 3822-1 AMD 1-2008聲學.供水設施的裝置和設備發射噪音的實驗室試驗.第1部分:測量方法.修改件1:不確定性測量

Amendment 1 to ISO 3822-1:1999 was prepared by Technical Committee ISO/TC 43, Acoustics,Subcommittee SC 2, Building acoustics.

ISO 3822-2-1995聲學 供水設施的裝置和設備發射的噪聲的實驗室測試 第2部分:放水龍頭和混合閥的安裝和工作條件

Describes the mounting and operating conditions to be used for draw-off taps and mixing valves when measuring noise emmission resulting from water flow. Replaces the first edition, which has been technically revised.

ISO 3822-4-1997聲學 供水設施的裝置和設備發射的噪聲的實驗室測試 第4部分:專用器件的安裝和工作條件

Gives the mounting and operating conditions to be used for a number of in-line valves and appliances, when measuring the noise emission resulting from water flow. Replaces the first edition.

EN ISO 3822-1-1999聲學.用于供水設施的裝置和設備發出的噪音的實驗室試驗.第1部分測量方法.包含修改件A1-2008

This part of EN ISO 3822 specifies a method of measurement, inThe laboratory, of the noise emission resulting fromThe flow of water through appliances and equipment used in water supply installations.The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances".The method specified makes it possible to obtain comparable results of measurements in different laboratories.

NF S31-014-3-2018聲學.供水設施用裝置和設備發射噪聲的實驗室試驗.第3部分:管路閥門和器件的安裝和工作條作

Domaine d'applicationLe présent document spécifie les conditions de montage de fonctionnement à utiliser pour les robinetteries et les équipements hydrauliques en ligne qui contr?lent le débit, la pression ou la température de l'eau dans les installations de distribution d'eau, quand le bruit émis résultant de l'écoulement de l'eau est mesuré.Il est applicable aux robinetteries et aux équipements hydrauliques en ligne de dimension nominale DN 32 et aux dispositifs dans lesquels le débit d'eau maximal ne dépasse pas 1,6 l/s.NOTEVoir l'ISO 6708; DN est le symbole de " diamètre nominal ". Le nombre désignant le diamètre nominal est relié de fa?on approximative au diamètre intérieur (en millimètres) des robinetteries et équipements en ligne.Les modes opératoires décrits sont en général utilisés pour tous les types de robinetteries en ligne de conception conventionnelle.

TS EN ISO 3822-1-2005聲學. 用于供水設施的裝置和設備發出的噪音的實驗室試驗. 第1部分: 測量方法

This standard specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.

TS EN ISO 3822-1/A1-2013聲學. 用于供水設施的裝置和設備發出的噪音的實驗室試驗. 第1部分: 測量方法. 修改件1: 測量不確定度

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations. The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances". The method specified makes it possible to obtain comparable results of measurements in different laboratories.

TS EN ISO 3822-2-1997聲學. 用于供水設施的裝置和設備發出的噪音的實驗室試驗. 第2部分: 抽水龍頭和混合閥的安裝和操作條件

This standard of specifies the mounting and operating conditions tobe used for draw off taps when measuring noise emission resulting from water flow.

TS EN ISO 3822-3-2002聲學. 用于供水設施的裝置和設備發出的噪音的實驗室試驗. 第3部分: 用于管道閥門和電器的安裝和操作條件

This standard, specifies the mounting and operating conditions to be used for in line valves and appliances which control the flow, pressure or temperature of the water in water supply installations when measuring noise emission resulting from water flow.

TS EN ISO 3822-3-2018聲學. 供水設施的裝置和設備發射噪音的實驗室試驗. 第3部分: 直插式閥門和設備的安裝和操作條件

This document specifies the mounting and operating conditions to be used for in-line valves and appliances which control the flow, pressure or temperature of the water in water supply installations, when measuring noise emission resulting from water flow.

TS EN ISO 3822-3/A1-2013聲學. 用于供水設施的裝置和設備發出的噪音的實驗室試驗. 第3部分: 用于管道閥門和電器的安裝和操作條件

This part of EN IS0 3822 specifies the mounting and operating conditions to be used fur in-line valves and appliances which control the flow, pressure or temperature of the water in. water supply installations, when measuring noise emission resulting from water flow It is applicable to in-line valves and appliances of maximum nominal size DN 32 1) and to systems in which the maximum water flow rate does not exceed 2 Vs. The procedure described are for general use for all types of in-line valves of conventional design.

TS EN ISO 3822-4-2002聲學. 用于供水設施的裝置和設備發出的噪音的實驗室試驗. 第4部分: 特殊管件的連接和操作條件

This standard specifies the mounting and operating coinditions to be used for a number of appliances which cannot be regarded as draw-off or in line valves, when measuring the noise emission resulting form water flow