燃氣裝置用手動燃氣閥檢測

燃氣裝置用手動燃氣閥檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 14536.19-2017家用和類似用途電自動控制器 電動燃氣閥的特殊要求，包括機械要求

本部分適用于家用和類似用途設備中的或隨這些設備一起使用的電動燃氣閥，這些設備使用電與氣態燃料，如打算用于氣體燃燒設備的人工煤氣、天然氣和液化石油氣的組合使用。本部分也適用于使用NTC和PTC熱敏電阻器的電動燃氣閥，對它們的附加要求包含在附錄J中。本部分適用于電動燃氣閥固有的安全性，適用于與設備安全有關的操作值、操作時間和操作程序，以及適用于在家用或類似設備內、設備中或隨設備一起使用的電動燃氣裝置的試驗。同時，也可擴展用于沒有專用標準，工業用途的產品，如用于中央供暖、空調、工藝加熱等。本部分也適用于在GB 4706.1范圍內的器具使用的控制器。本部分不適用于專門用于工業用途的電動燃氣閥。對于非一般家用的但仍可能用于公共場所的，如給商店、輕工業工廠和農場中的非人士使用的設備，其電動燃氣閥也包括在本部分范圍內。本部分定義了很多作為“在考慮中”的機械性能。在使用本部分時應確定這些要求，直到這些機械要求被合并到本部分中。符合本部分的電動燃氣閥仍需對閥的機械性能進行進一步試驗。本部分適用于那些在電氣上和/或機械上與電動燃氣閥組合在一起的人工控制器。本部分不適用于標稱連接尺寸超過DN150的電動燃氣閥。本部分適用于大工作壓力高達400 kPa(4 bar)的電動燃氣閥。在下文中，術語“閥”指電動燃氣閥(包括原動機構和閥體)。

GB 50028-2006城鎮燃氣設計規范

本規范適用于向城市、鄉鎮或居民點供給居民生活、商業、工業企業生產、采暖通風和空調等各類用戶作燃料用的新建、擴建或改建的城鎮燃氣工程設計。 注:1 本規范不使用于城鎮燃氣門站以前的悵距離輸氣管道工程。 2 本規范不適用于工業企業自建供生產工藝用且燃氣質量不符合本規范質量要求的燃氣工程設計，但自建供生產工藝用且燃氣質量符合本規范要求的燃氣工程設計，可按本規范執行。工業企業內部自供燃氣給居民使用時，供居民使用的燃氣質量和工程設計應按本規范執行。 3 本規范不適用于海洋和內河輪船、鐵路車輛、汽車等運輸工具上的燃氣裝置設計。

CJ/T 180-2014建筑用手動燃氣閥門

本標準規定了建筑用手動燃氣閥門(以下簡稱閥門)的分類及型號,材料、結構和連接尺寸,要求,試驗方法,檢驗規則,標志、包裝、運輸和貯存。本標準適用于公稱壓力不大于1.6 MPa、公稱尺寸不大于100 mm、工作溫度不超出-20 ℃~60 ℃且其下限不低于燃氣露點溫度,安裝在建筑物內外的非直埋燃氣裝置與設施上的手動燃氣球閥和底部密封的旋塞閥。本標準所指燃氣為符合GB/T 13611規定的燃氣。

CJJ 94-2009城鎮燃氣室內工程施工與質量驗收規范

為統一城鎮燃氣室內工程的施工與質量驗收，保證城鎮燃氣室內工程的施工質量，確保安全供氣，制定本規范。本規范適用于供氣壓小于或等于0.8MPa（表壓）的新建、擴建和改建的城鎮居民住宅、商業用戶、燃氣鍋爐房（不含鍋爐本體）、實驗室、工業企業（不含用氣設備）等用戶室內燃氣管道和用氣設備安裝的施工與質量驗收。

JC/T 2352-2016建筑陶瓷企業安全生產規范

本標準規定了建筑陶瓷企業安全生產的機構和人員、安全基礎管理、設備安全、作業安全、承包商和主要供應商的安全管理以及事故預防和處理。本標準適用于建筑陶瓷生產企業。

JC/T 2354-2016衛生陶瓷企業安全生產規范

本標準規定了衛生陶瓷企業(下稱企業)安全生產的機構和人員、安全基礎管理、設備安全、作業安全、承包商和主要供應商的安全管理以及事故預防和處理。本標準適用于制造加工衛生陶瓷的生產企業。

UL 1776-2002高壓清洗機

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.

DIN EN 303-7-2007加熱鍋爐.第7部分:用標稱熱輸出功率小于1000 kW的強排風燃爐裝備的燃氣中央加熱鍋爐

This European Standard specifies the requirements and test methods for the contruction,the safety and the rational energy usage for gas-fired standard and low temperature central heating boilers equipped with a forced draught burner.These boilers comprise a boiler body and a forced draught gas burner brought together at the producer's assembly facility,the whole being disigned and marketed as a complete boiler.This standard does not apply to the case of the assembly of a boiler body and a forced draught gas burner designed and marketed separately.In this case,EN 303-3 applies.This European Standard applies to type B boilers with a nominal heat output not exceeding 100 kw with a water temperature at normal operation not exceeding 105°C and with a maximum water-side operating pressure not exceeding 8 bar.This European Standard does not contain all the necessary requirements for:- condensing boilers and combination boilers;- boilers intended to be installed in the open;- boilers permanently fitted with more than one flue outlet;- boilers intended to be connected to a common flue having mechanical extraction;- boilers equipped with several combustion chambers.This European Standard does not apply to living-space dedicated boilers(see 3.6).This European Standard only covers type testing.

DIN EN 13278-2014前開式獨置燃氣加熱器.德文版本EN 13278-2013

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of open fronted gas-fired independent space heaters with and without a fan to assist with the transportation of flue gases. Although the fan may be mounted outdoors, this standard only covers appliances where the body of the appliance is indoors. This standard applies to types B11AS, B11BS, B14AS, and B14BS open fronted gas-fired independent space heating appliances that incorporate an atmospheric burner, that are connected directly to an open flue or to a device to evacuate the products of combustion (open-flued appliances), that have a nominal heat input not exceeding 20 kW (based on the net calorific value) and that are delivered with the gas-carrying components, burner (s), combustion chamber and heat exchanger fully assembled.

BS 5546-2010額定輸入不超過70kW的家用燃氣供熱水裝置的安裝和維修規范

This British Standard specifies requirements for the selection,installation, inspection, commissioning and maintenance of gas?firedwater-heating appliances, which have a rated heat input notexceeding 70 kW, based on net calorific value.It applies to water-heating appliances utilizing 1st, 2nd or 3rd familygases designed to operate in the condensing or non?condensingmode for the supply of hot water for domestic purposes in domesticdwellings or domestic dwellings in commercial premises.This standard does not apply to:a) water-heating appliances with a rated input of over 70 kW;b) hot water supply systems in multiple dwellings supplied from acentral source.It does not cover the detailed design and installation of the whole hotwater distribution system, which was specified in BS 5449.This standard applies to water-heating appliances which carry aCE mark and also to previously used water-heating appliances whichdo not carry the CE mark (see 5.3.1).

ANSI Z21.5.1-2006燃氣衣物干燥器、卷I、 1型干衣機(與CSA 7.1b相同)

Details test and examination criteria for Type 1 clothes dryers for use with natural, manufactured or mixed gases, liquefied petroleum gases or LP gas-air mixtures.

ANSI Z21.18-2007燃氣器具壓力調節器(與CSA 6.3相同)

Details test and examination criteria for gas appliance pressure regulators for use with natural, manufactured and mixed gases, liquefied petroleum gases and LP gas-air mixtures. Such devices, either individual or in combination wit other controls, are i