半自動捆扎機檢測

半自動捆扎機檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 15069-2008罐頭食品機械術語

本標準規定了罐頭食品機械常用術語，包括一般術語、空罐備料術語、罐身設備術語、封罐設備術語、原料處理設備術語、物料加工設備術語、裝罐（充填）設備術語、殺菌設備術語、包裝設備術語、其他設備術語、各類容器術語，以及常用相關術語。本標準適用于罐頭食品機械。

GB/T 26960-2011半自動捆扎機

本標準規定了半自動梱扎機（以下簡稱"捆扎機"）的術語和定義、型號、型式與基本參數、技術要求、試驗方法、檢驗規則及標志、包裝、運輸與貯存。本標準適用于以機用塑料打包帶（以下簡稱"打包帶")作為梱扎材料，接頭型式為熱熔搭接的半自動捆扎機。

YB/T 4085-2008金屬材料捆扎機械通用技術條件

本標準規定了金屬材料捆扎機械(包括捆扎機、夾緊成形機)的型號編制方法、基本參數、技術要求、檢驗方法和檢驗規則、標志、包裝和貯運以及捆扎范圍。本標準適用于采用鋼帶或鋼絲作為捆扎材料，對冶金工廠鋼材或其他金屬材料進行夾緊、捆扎的設備。

HG/T 20533-1993化工機械化運輸設計常用名詞術語統一規定

本標準規定了化工機械化運輸設計常用名詞術語，適用于化工機運制訂行業標準、編制技術文件、編寫和翻譯資料等。

HG/T 20560-1997化工機械化運輸工藝設計施工圖內容和深度規定

1.0.1本規定作為指導性文件，旨在統一化工機械化運輸工藝設計施工圖的內容和深度，使之準確、完整，確保設計質量，方便施工安裝。 1.0.2本規定對化工粉粒體和塊狀物料儲運系統工藝施工圖設計文件的組成及其深度、格式和表示方法等作了規定。 1.0.3本規定適用于新建大、中型化工企業工程建設的固體物料儲運系統(由HG 20518《化工機械化運輸設計原則規定》之總則所界定的單元操作和生產裝置)工藝設計。擴建、建或小型化工企業固體物料儲運系統工藝設計可參照執行。 1.0.4本規定以我國歷年沿用的設計體制為基本架構，但設計文件(圖紙、表格等)的表示方法和格式，則力求向通用設計體制靠近，并與HG 20519、HG 20546、HG 20557～20559相一致。

JC/T 2355-2016五金衛生潔具安全生產規范

本標準規定了五金衛生潔具生產企業(以下簡稱企業)的術語和定義、機構和人員、管理制度、設備設施安全、作業安全、承包商和主要供應商的安全管理以及事故預防和處理。本標準適用于企業開展安全生產標準化工作以及對標準化工作的咨詢、認證服務和評審，其他相關生產企業可參照執行。

QB/T 6003-2015真空制鹽工業設備安裝工程施工及驗收規范

本規范適用于新建、擴建、改建、遷建及設備大修的真空制鹽工廠整體安裝設備和現場組焊設備安裝工程施工及驗收，包括鹵水凈化、蒸發結晶、脫水、干燥、包裝、儲運工序和副產品芒硝及石膏等的生產設備以及與之配套的循環水設備。其他類似采用真空蒸發制鹽工藝及裝置生產的無機鹽(如芒硝)的設備安裝工程施工及驗收亦可參照本規范執行。熱壓制鹽工程的施工及驗收參照本規范執行。本規范未包括供熱、發電、機修、供水(不含制鹽循環水)、自控、電氣等和國外設備的安裝，其施工及驗收，應按有關現行或行業標準的規定和國外隨機技術條件(含設計圖)的規定執行。本規范涉及的管道安裝工程，其施工與驗收，應按現行標準GB 50235《工業金屬管道工程施工規范》、GB 50184《工業金屬管道工程施工質量驗收規范》和GB 50236《現場設備、工業管道焊接工程施工規范》的相關規范規定執行。本規范所引用的標準，凡是注日期的引用標準，僅所注日期的版本適用于本規范。凡是不注日期的引用標準，其新版本(包括所有的修改單)適用于本規范。

WS/T 118-1999衛生行業藥療器械、儀器設備(商品、物資)分類與代碼

本標準規定了衛生行業醫療器械、儀器設備（商品、物資）的分類與代碼。 本標準適用于衛生行業各醫療、教學、科學研究和生物制品等單位對物資管理、計劃、統計及會計業務等使用。

YC/T 384.2-2018煙草企業安全生產標準化規范 第2部分:安全技術和現場規范

YC/T 284的本部分規定了煙草企業安全生產標準化的安全技術和現場規范要求，包括設備設施、作業活動、作業環境和現場運行的安全要求。本部分適用于省級煙草公司(局)、省級工業公司等省級公司、煙草加工和煙草商業生產經營單位。其中，煙草商業生產經營單位特指地市級煙草公司，煙草加工單位含煙葉復烤、卷煙制造、雪茄煙制造、再造煙葉生產的單位。煙草配套和多元化投資的其他生產經營單位，如醋酸纖維、煙草印刷等單位可參照執行。

SN/T 3191-2012進出口包裝行業成套設備檢驗技術要求

本標準規定了進出口包裝行業成套設備之包裝機械成套設備(以下簡稱成套包裝設備)的檢驗技術要求。本標準適用于3.1條定義的進出口成套包裝設備(含允許進口的舊成套包裝機械設備)的檢驗。本標準不適用于食品、藥品包裝設備的檢驗。本標準不適用于包裝容器制造設備及包裝材料制造設備的檢驗。

JB/T 3790.2-1994機械式半自動捆扎機

本標準規定了機械式半自動捆扎機的術語、型式和基本參數、技術要求、試驗方法、檢驗規則以及標志、包裝、運輸、貯存。 本標準適用于以機用塑料打包帶作為捆扎材料，接頭型式為熱熔搭接的機械式半自動捆扎機。

EN ISO 10821-2005工業縫紉機械.縫紉機械,設備和系統的安全要求.包含修改件A1-2009

This International Standard identifies hazards and specifies safety requirements applicable to sewingmachines, sewing units and sewing systems designed for professional (industrial, commercial or laboratory)use in industries including the clothing and footwear, leather goods, shirts and blousery, hosiery and knitwear,lingerie, glove, upholstery and packaging industries, and in shoe repair.

DIN EN 415-1-2014打包機的安全.第1部分:打包機及相關設備的專用術語和分類,德文版本EN 415-1-2014

This European standard defines the field of packaging machines in detail, but briefly these are: Filling and Dosing machines; closing machines; labelling, decorating and coding machines; cleaning, sterilising, cooling and drying machines; fill and seal machines; inspection machines; container and component handling machines; form, fill and seal machines; cartoning machines; wrapping machines; group or transit packaging machines; pallet or loading unit forming, dismantling and securing machines.

DIN EN 415-7-2009包裝機械的安全.第7部分:組件和二次包裝機械,德文版本EN 415-7:2006+A1:2008

This European Standard applies to the following groups of machines:Group and secondary packaging machines and the collating systems associated with them.The individual machines are described in 3.2 of this European Standard.This European Standard deals with safety requirements for machine design, construction, installation,commissioning, operation, adjustment, maintenance and cleaning of group and secondary packagingmachines.The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4.ExclusionsThis European Standard is not applicable to the following machines: -- machines that were manufactured before the date of publication of this document by CEN; -- strapping machines. These machines are covered by EN 415-8; -- crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by EN 415-2; -- cartoning machines. Cartoning machines are covered by EN 415-3.This European Standard does not consider the following hazards: -- use of group and secondary packaging machines in potentially explosive atmospheres; -- health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; -- hazards that may be associated with electromagnetic emissions from group and secondary packaging machines; -- hazards that may be associated with decommissioning group and secondary packaging machines.

DIN EN 415-8-2011包裝機械的安全性.第8部分:捆包機;德文版本EN 415-8-2008

This European Standard applies to the following groups of machines: - powered hand strapping tools; - semi-automatic strapping machines; - automatic strapping machines; - horizontal pallet strapping machines; - vertical pallet strapping machines. The individual machines are described in 3.3. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines: - strapping tools that are powered exclusively by manual effort; - strapping machines that were manufactured before the date of publication of this document by CEN. This European Standard does not consider the following hazards: - the use of strapping machines in potentially explosive atmospheres; - the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; - hazards that can be associated with electromagnetic emissions from strapping machines; - hazards that can be associated with decommissioning strapping machines.

DIN EN 415-8 Berichtigung 1-2016包裝機械的安全性. 第8部分: 捆扎機; 德文版本EN 415-8-2008, DIN EN 415-8-2011-06勘誤表

This European Standard establishes safety requirements for power operated strapping machines and the collating systems that are associated with them. This group of machines is defined in detail in clause 3 of this standard, with diagrams illustrating examples of the principle of operation of each machine type. This standard covers the safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning. This part of EN 415 applies primarily to machines manufactured after the date of issue of this standard. Exclusions: This standard does not cover strapping tools that are powered exclusively by hand. This standard does not cover in detail the health, safety or hygiene hazards associated with the products which may be handled by strapping machines, but does include general advice on these subjects. This standard does not cover the hazards that may be associated with decommissioning strapping machines.

DIN EN 1010-1-2011機械安全性.印刷和紙加工機械的設計和建造的安全性要求.第1部分:通用要求.德文版本EN 1010-1-2004+A1-2010

This document applies to: - printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and checking the print quality (auxiliary printing machinery).- paper converting machines, i.e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.