工業洗衣機檢測

工業洗衣機檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 25115.5-2010工業洗滌機械的安全要求 第5部分：熨平機、送料機和折疊機

GB 25115的本部分和第一部分給出了熨平機、送料機和折疊機的重要危險。本部分適用于下列產品：工作狀態接觸面積大于0.25m<上標 2>的滾筒式和槽式熨平機；將平面物料自動送入熨平機或折疊機的送料機；與滾筒式和槽式熨平機配套的自動折疊平面物料的折疊機；自動折疊小件物料的折疊機；多功能熨平機。本部分用以指導設計者如何對危險作出危險性評價以及選擇措施以達到所要求的安全級別。本標準不適用于化學物品供給泵、蒸汽閥和供給管道、通風系統、物料進給系統、卸載系統和排氣系統等輔助設備。

GB/T 33452-2016洗染術語

本標準界定了洗染行業常用的術語和定義。本標準適用于洗染行業經營、培訓及其相關的領域。

GB/T 36931-2018工業洗滌機械術語

本標準界定了工業洗滌機械的術語和定義。本標準適用于工業/商用類的洗滌機械。本標準不適用于制衣行業的專用整理機，也不適用于家用和類似用途的電器。

QB/T 2323-2017工業洗衣機

本標準規定了工業洗衣機及洗滌脫水機的術語和定義、產品分類、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于工業洗衣機和洗滌脫水機。本標準不涉及隧道式洗滌機組。

QB/T 2329-1997服裝機械.鉆孔機

本標準規定了服裝機械中鉆孔機的產品分類、技術要求、試驗方法、檢驗規則及標志、包裝、運輸和貯存。t本標準適用于服裝加工業的鉆孔機，也適用于無調溫裝置的鉆孔機(以下簡稱鉆孔機)。

QB/T 2330-2017工業烘干機

本標準規定了工業烘干機(以下簡稱烘干機)的術語和定義、產品分類、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于工業洗衣場所的烘干機。

QB/T 5675-2022工業洗衣機節能與用水循環利用技術規范

本文件描述了工業洗衣機節能與用水循環利用的流程、原理，規定了技術要求、驗收規則。本文件適用于工業洗衣機、洗脫機、隧道式洗滌機、離心式脫水機、壓干機等有關洗滌設備的節能與洗滌用水循環系統的建設與改造。

SB/T 10783-2012洗染業術語

本標準給出了洗染業常用的術語和定義。本標準適用于洗染業經營、培訓及其相關的領域。

ISO 9398-1-2003工業洗衣機規范.容量和能耗特性定義和測試.第1部分:家用織物熨燙機

This part of ISO 9398 defines the characteristics of flatwork ironing machines and gives the usual test methods for determining these characteristics with regard to machine capacity, power consumption and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for flatwork ironing machines having a contact surface area greater than 0,25 m. It does not cover safety requirements (see ISO 10472-5).nNOTE Where more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 9398-2-2003工業洗衣機規范.容量和能耗特性定義和測試.第2部分:間歇式轉鼓烘燥機

This part of ISO 9398 defines the characteristics of batch drying tumblers and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for batch drying tumblers whose net usable cage volume is greater than 160 dm (litres). It does not cover safety requirements (see ISO 10472-4).nNOTE If more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 9398-3-2003工業洗衣機規范.容量和能耗特性定義和測試.第3部分:管道式洗滌機

This part of ISO 9398 defines the characteristics of washing tunnels and gives the usual test methods for determining machine power consumption and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for washing tunnels. It does not cover safety requirements (see ISO 10472-3).nNOTE Where more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 9398-4-2003工業洗衣機規范.容量和能耗特性定義和測試.第4部分:洗滌脫水聯合機

This part of ISO 9398 defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power and water consumption, and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is greater than 60 dm (litres). It does not cover safety requirements (see ISO 10472-2).nNOTE If more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 10472-1-1997工業洗衣機安全要求 第1部分:通用要求

The individual parts of ISO 10472 identify all significant hazards associated with laundry machinery designed for use in industrial laundry premises, which includes hotels, hospitals, nursing homes, prisons and similar premises, as well as machines designed for use in self-service establishments subject to the minimum capacities stated in the separate parts of ISO 10472. Dry-cleaning presses and garment presses are also included.nCertain specialized finishing machines used for shaped items are excluded. Household and similar electrical appliances (see IEC 335) are not covered by ISO 10472.nThe individual parts of ISO 10472 complement the basic requirements laid down in ISO/TR 12100-1 and ISO/TR 12100-2. They give guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures to attain the required safety level. "Use of machinery" comprises both intended use and reasonably foreseeable misuse.nThe individual parts of ISO 10472 do not give specific technical advice about:n— the phases of life of the machine other than use;n— noise;n— laser;n— maintenance operations and elimination of process faults;n— ergonomics;n— explosions;n— isolation of energy sources;n— pressure vessels;n— hot surfaces necessarily exposed for production purposes [but see ISO 10472-6 (press head surface)].nThe individual parts of ISO 10472 do not cover electromagnetic compatibility.nHazards due to the use of gas within a machine which is not included in the range described in 5.5.2 of this part of ISO 10472 are not covered by the individual parts of ISO 10472.nExamples of layouts of a large- and a medium-size plant which show the machines of parts 2 to 6 of ISO 10472 are given in annex B.nThe individual parts of ISO 10472 apply to machines which are manufactured after the date of issue of the relevant parts.nNOTE — For significant hazards concerned with construction, transport, commissioning, decommissioning, dismantling and disposal of the machine, see ISO/TR 12100-1:1992, 3.11, 3.12 and ISO/TR 12100-2:1992, 5.5.nThe guidance contained in the individual parts of ISO 10472 is based on the assumption that the designer has completed a risk analysis of the machine under consideration. This will enable him to identify and fulfil the significant requirements for the machine as stipulated by the individual parts of ISO 10472.

ISO 10472-2-1997工業洗衣機安全要求 第2部分:洗衣機和洗滌脫水機

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing machines and washer-extractors of all configurations having a net usable cage volume > 60 |.nThis part of ISO 10472 does not cover particular hazards for drawer-type washer-extractors.nThis part of ISO 10472 does not cover the hazards caused by processing work which may create an explosive or flammable atmosphere inside the machine.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e.g. chemical supply pumps, steam valves and supply pipe work, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

ISO 10472-3-1997工業洗衣機安全要求 第3部分:管道式洗滌(聯合)機及相關機械

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing tunnel lines including component machines such as:n— continuous tunnel washing machines;n— squeeze presses or centrifugal extraction machines;n— transfer conveyor systems;n— automatic transfer tumblers;n— loading or unloading system interfaces;n— access platform and ladders.nThis part of ISO 10472 does not cover particular hazards for continuous stand-alone washing lines for endless towels.nThis part of ISO 10472 does not cover the hazards caused by processing work which may create an explosive or flammable atmosphere inside the machine.nThis part of ISO 10472 complements the basic requirements laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e. g. chemical store and supply pumps, steam valves and supply pipework, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

ISO 10472-4-1997工業洗衣機安全要求 第4部分:空氣干燥機

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with air dryers, and in particular with tumble dryers having a net usable cage volume > 160 | and tunnel finishers including associated conveyors and cabinet dryers.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment.

ISO 10472-5-1997工業洗衣機安全要求 第5部分:織物熨燙機、進布機和折布機

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with flatwork ironers, feeders and folders, such as:n— cylinder and bed ironers for flatwork finishing having a contact area (for bed ironers under pressure) > 0,25 m;n— flatwork feeding machines for the automatic feeding of flatwork into bed or cylinder ironers, or directly to folders;n— flatwork folding machines for the automatic folding of flatwork in association with cylinder and bed ironers;n— folding machines for the automatic folding of small pieces (excluding endless towels);n— multi-function machines.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e. g chemical supply pumps, steam valves and supply pipe work, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

ISO 10472-6-1997工業洗衣機安全要求 第6部分:熨燙及熔壓機

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with ironing and fusing presses used in the laundry, garment and dry-cleaning industry, and in particular:n— scissor presses;n— cabinet presses;n— drawer presses;n— rotary presses (carousel) and other presses with multiple bucks.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e. g steam boilers, steam valves and supply pipe work, vent systems, work feed systems and discharge systems, and ducting to the atmosphere.