歡迎訪問中科光析科學技術研究所官網!

免費咨詢熱線
400-640-9567|
房間加熱用軟片加熱元件檢測項目報價???解決方案???檢測周期???樣品要求? |
點 擊 解 答??![]() |
GB 4706.1-2005的該章用下述內容代替:GB 4706的本部分規定了用于動物繁殖和飼養的電加熱器的安全。本部分適用于各種用于動物繁殖和飼養的電加熱器,如熱輻射器、小雞取暖箱、孵蛋器、小雞飼養裝置和動物用取暖板的安全。對于單相的電加熱器,其額定電壓應不超過250 V;對于其他的電加熱器,其額定電壓應不超過480 V。
GB 4706.1-2005的該章以下述內容代替:GB 4706的本部分規定了軟片加熱元件的安全。本部分適用于預定安裝在建筑物內為其所在的房間加熱的軟片加熱元件,其單相裝置額定電壓不超過250 V,其他裝置額定電壓不超過480 V。按照說明中安裝在建筑物內,達到要求的危險防護等級后,軟片加熱元件即成為加熱單元。
GB 4706.1的該章用下述內容代替:本部分涉及以下器具的安全:--電熱地毯和類似器具;--打算直接安裝在房間內可移動的地板覆蓋物下方,并加以固定的用于加熱房間的電熱裝置。單相裝置的額定電壓不超過250 V,其他裝置的額定電壓不超過480 V。
GB/T 16895的本部分適用于室內外表層加熱的埋入式電加熱系統,也適用于除冰、防霜凍等類似用途的電加熱系統。本部分不包括符合IEC 60519、IEC 62395及IEC 60079所規定的工業、商業用途加熱系統。
GB/T 32348的本部分對電阻式伴熱系統在工業和商業應用領域的設計、安裝、維護和維修提出了詳細的建議。本部分不包括潛在爆炸性氣體環境中的任何應用。本部分適用的電伴熱系統涉及到工廠裝配或現場(施工現場)安裝組件,以及已經按照制造商的說明裝配和/或端接的串聯和并聯伴熱器或表面加熱器(伴熱墊和伴熱板)。本部分涵蓋的產品由受過適當技術培訓的人員安裝,并且只能由受過培訓的人員進行特別關鍵的工作,例如接頭和尾端的安裝。安裝需在有資質的電工的監督下進行,該電工應接受過電伴熱系統的補充培訓。本部分不包括感應、阻抗或集膚效應加熱。電伴熱系統可以分為不同的應用類型,在安裝時和安裝后的不同條件下需要滿足不同的試驗要求。電伴熱系統通常適用于特定類型的裝置或應用。不同類型安裝的典型應用包括但不限于:a) 管道、容器和相關設備表面加熱用伴熱裝置,應用包括:——防凍和保溫;——熱水管道;——石油和化工管道;——噴灑系統。b) 戶外露天場地伴熱裝置,應用包括:——屋頂除冰;——排水溝和下水管道除冰;——集水池與排水溝;——軌道加熱。c) 具有嵌入式伴熱系統的裝置,應用包括:——融雪;——地暖;——防止冰脹;——地下熱能存儲系統;——門框。d) 導管或管道內部伴熱系統的安裝,應用包括:——融雪(在導管內);——凍脹防護(在導管內);——地暖(在導管內);——蓄能系統(在導管內);——飲用水管道內部伴熱;——封閉排水管和陰溝。
本標準規定了低溫輻射電熱膜的術語和定義、分類和標記、要求、試驗方法、檢驗規則、標志、包裝、使用說明書、運輸及貯存。本標準適用于建筑供熱用低溫輻射電熱膜。其單相裝置的額定電壓不超過250V,其他裝置的額定電壓不超過480V。其他行業的電熱采暖用電熱膜也可參照使用。
本標準規定了建筑用碳纖維發熱線的分類與標記、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于工業與民用建筑低溫輻射供熱系統使用的額定電壓300/500 V的碳纖維發熱線產品。
This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of flexible sheet heating elements intended to be incorporated into floors and walls below 1,2 m and above 2,3 m and in ceilings, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations. Flexible sheet heating elements are converted into heating units that are incorporated in the building in accordance with the instructions after which the required level of protection against hazards is achieved. NOTE 101 Attention is drawn to the fact that in many countries, different wiring rules apply; for heating units intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary; in many countries, additional requirements are specified by the national authorities for fire protection, the national authorities for building regulations, the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to; heating units intended exclusively for industrial purposes; heating units intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); blankets, pads, clothing and similar flexible heating appliances (IEC 60335-2-17); foot warmers and heating mats (IEC 60335-2-81); heated carpets and for heating units for room heating installed under removable floor coverings (IEC 60335-2-106); flexible sheet heating elements incorporated in other appliances.
Le présent document précise les prescriptions pour les unités chauffantes installées dans ou sur des planchers en bois ou en béton.Ce document entre dans le champ d'application de la Directive Basse Tension no 73/23/CEE du 19/02/1973 modifiée par 93/68/CEE du 22/07/1993.
Le présent document modifie l'introduction et les articles 2, 7, 21, 29, la bibliographie et l'annexe ZC de la norme homologuée NF EN 60335-2-96 de mai 2003.Le présent document entre dans le champ d'application de la Directive Basse Tension no2006/95/CE du 12/12/2006.
This International Standard deals with the safety of flexible sheet heating elements intendedto be incorporated into the building to heat the room in which they are located, their ratedvoltage being not more than 250 V for single-phase installations and 480 V for otherinstallations .
?1?? ? ??? ??? ?? ????.? ??? ??? ???? ??? ???? ?
?1?? ? ?? ??? ?? ????.? ??? ??? ???? ??? ???? ??????? ?? ?? ??? ????? 250 V ??, ?? ??? 480 V ??? ?? ???? ????.
前沿科學
微信公眾號
中析研究所
抖音
中析研究所
微信公眾號
中析研究所
快手
中析研究所
微視頻
中析研究所
小紅書