太陽能用玻璃反射鏡檢測

太陽能用玻璃反射鏡檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 30984.1-2015太陽能用玻璃 第1部分:超白壓花玻璃

GB/T 30984的本部分規定了超白壓花玻璃的術語和定義、分類和常用規格、要求、試驗方法、檢驗規則、包裝、標志、運輸、貯存等。本部分適用于地面用晶體硅光伏組件用超白壓花玻璃，其他太陽能用超白壓花玻璃可參照本部分。

GB/T 30984.2-2014太陽能用玻璃 第2部分:透明導電氧化物膜玻璃

GB/T 30984的本部分規定了透明導電氧化物膜玻璃的術語和定義、材料、要求、試驗方法、檢驗規則、包裝、標識、貯存和運輸。本部分適用于薄膜光伏電池用透明導電氧化物膜玻璃。

GB/T 30984.3-2016太陽能用玻璃 第3部分：玻璃反射鏡

GB/T 30984的本部分規定了玻璃反射鏡的術語和定義、分類和常用規格、材料、要求、試驗方法、檢驗規則、包裝、標志、貯存和運輸。本部分適用于太陽能光熱用玻璃反射鏡，聚光光伏用反射鏡及其他類型反射鏡可參照此部分執行。

GB/T 33234-2016光熱發電玻璃反射鏡反射比測試方法

本標準規定了光熱發電玻璃反射鏡反射比測試中涉及的術語和定義、儀器、試樣和標樣、試驗條件、試驗步驟、試驗結果及試驗報告。本標準適用于太陽能光熱用聚光玻璃反射鏡的太陽光半球反射比和鏡面反射比的測試和計算。聚光光伏用反射鏡及其他類型玻璃反射鏡的反射比測試可參照此標準。

GB/T 33235-2016光熱發電玻璃反射鏡抗冰雹沖擊試驗方法

本標準規定了光熱發電玻璃反射鏡抗冰雹沖擊試驗中涉及的試驗條件、試驗?zāi)康摹⒃囼?yàn)裝置和器具、試樣、試驗程序、結果表達、試驗報告。本標準適用于太陽能光熱用玻璃反射鏡的抗冰雹沖擊性能測試，聚光光伏用玻璃反射鏡及其他類型玻璃反射鏡的抗冰雹沖擊性能測試可參照此標準。

GB/T 50780-2013電子工程建設術語標準

1.0.1為規范電子工程建設的基本術語及其定義,實現術語標準化,制定本標準。1.0.2本標準適用于電子工程建設的規劃、咨詢、設計、工程監理、工程管理等工程服務以及教學、科研及其他相關領域。1.0.3電子工程建設文件、圖紙、科技文獻使用的術語,除應符合本標準外,尚應符合現行有關標準的規定。

GB/T 51307-2018塔式太陽能光熱發電站設計標準

本標準適用于采用蒸汽輪發電機組的新建、擴建和改建塔式太陽能光熱發電站的工程設計。

JB/T 10292-2001溫室工程.術語

本標準系溫室系列標準之一。該系列標準包括： ——溫室結構設計荷載 ——溫室通風降溫設計規范 ——設施農業術語 ——連棟溫室結構 ——日光溫室結構 ——溫簾降溫裝置 ——溫室加熱系統設計規范 ——溫室電氣布線設計規范 ——溫室控制系統設計規范 上述標準中前兩項為標準，其余為行業標準。 本標準規定了設施農業溫室工程的名詞術語及其定義。 本標準適用于設施農業溫室工程。 本標準于2001年6月首次發布。

EN 12975-1-2006太陽熱能系統和部件.集熱器.第1部分:一般要求

This European Standard specifies requirements on durability (including mechanical strength), reliability and safety for liquid heating solar collectors. It also includes provisions for evaluation of conformity to these requirements. It is not applicable to those collectors in which the thermal storage unit is an integral part of the collector to such an extent, that the collection process cannot be separated from the storage process for the purpose of making measurements of these two processes. It is basically applicable to concentrating collectors; thermal performance testing as given in EN 12975-2:2006, 6.3. (quasi dynamic testing) is also applicable to most concentrating collector designs, from stationary non-imaging concentrators as CPCs to high concentrating tracking designs. Collectors that are custom-built (built in, roof integrated collectors that do not comprise factory made modules and are assembled directly on the place of installation) cannot be tested in their actual form for durability, reliability and thermal performance according toThis standard. Instead, a module with the same structure as the ready collector is tested. The module gross area in the case of custom built collectors should be at least 2 m 2 . The test is valid only for larger collectors, than the tested module. For collectors the national and European Guidelines for Structural Planning and overhead glazing are not valid. ThereforeThis standard should be applied for the design of the static of the collector.

NF P78-310-2-2008建筑玻璃.室內用鍍銀浮法玻璃鏡.第2部分:合格性評估.產品標準

La présente Norme européenne spécifie des exigences relatives à l'évaluation de la conformité et au contr?le de la production en usine des miroirs plats en glace argentée utilisés à l'intérieur des batiments.

DIN EN 1036-2-2008建筑玻璃.內部用鍍銀的浮法玻璃反射鏡.第2部分:一致性評估.產品標準

This European Standard specifies requirements, the evaluation of conformity and the factoryproduction control of flat mirrors from silver-coated float glass for internal use in buildings.NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, otherdirectives, e.g. Low Voltage Directive, may apply.

DIN EN 62047-1-2016半導體裝置.微型機電裝置.第1部分:術語和定義(IEC 62047-1-2016).德文版本EN 62047-1-2016

This part of DIN EN 62047 defines terms for micro-electromechanical devices including the process of production of such devices.

BS EN 12975-1-2006+A1-2010熱太陽能系統和部件.太陽能收集器.一般要求

This European Standard specifies requirements on durability (including mechanical strength), reliability and safety for liquid heating solar collectors. It also includes provisions for evaluation of conformity to these requirements.It is not applicable to those collectors in which the thermal storage unit is an integral part of the collector to such an extent, that the collection process cannot be separated from the storage process for the purpose of making measurements of these two processes. It is basically applicable to concentrating collectors;thermal performance testing as given in EN 12975-2:2006, 6.3. (quasi dynamic testing) is also applicable to most concentrating collector designs, from stationary non-imaging concentrators as CPCs to high concentrating tracking designs.Collectors that are custom-built (built in, roof integrated collectors that do not comprise factory made modules and are assembled directly on the place of installation) cannot be tested in their actual form for durability, reliability and thermal performance according to this standard. Instead, a module with the same structure as the ready collector is tested. The module gross area in the case of custom built collectors should be at least2 m. The test is valid only for larger collectors, than the tested module.For collectors the national and European Guidelines for Structural Planning and overhead glazing are not valid.Therefore this standard should be applied for the design of the static of the collector.