移動式斜切鋸檢測

移動式斜切鋸檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 19517-2009電氣設備安全技術規范

本標準適用于交流額定電壓1200V以下、直流額定電壓1500V以下的各類電氣設備。本標準不適用于：本規范規定的電氣設備的材料和輔助材料除外;不能獨立使用的半成品或初級產品;用于醫療目的的電氣設備;爆炸環境中使用的電氣設備;電梯;電柵欄激發器;船舶、飛行器和鐵路等特殊電氣設備。

GB 30461-2013木工機床安全 帶鋸機

本標準規定了手動或自動上下料的木工帶鋸機(以下簡稱機床)上去除危險和限制風險的要求和/或措施。本標準適用于切削實木、刨花板、纖維板、膠合板和有塑料貼面或貼邊材料的機床。本標準包括與該機床有關的所有危險,詳見第4章。本標準不適用于手持式機床和臺式機床(按GB 13960.1和GB 13960.6的規定)。本標準不包括由其他加工帶來的危險(例如,銑削和圓鋸切削)。

GB 50012-2012Ⅲ、Ⅳ級鐵路設計規范

本規范適用于新建、改建Ⅲ、Ⅳ級標準軌距鐵路的設計。

QB/T 1693-1993制漿造紙機械設備術語

本標準規定了有關制漿造紙工業專用機械設備的術語、詞匯。t本標準運用于制漿造紙工業專用機械設備的名稱、產品標準、教材及其他有關技術文件。

IEC 62841-3-9-2020手持式電動操作工具, 移動式工具以及草坪和園藝機械. 安全. 第3-9部分: 移動式斜切鋸的特殊要求

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might simply be referred to as saw or tool. This International Standard does not apply to mitre saws intended to cut other metals, such as magnesium, steel and iron. This document does not apply to mitre saws with an automatic feeding device. NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3. This document does not apply to saws designed for use with abrasive wheels. NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10. This document does not apply to tools combining the function of a mitre saw with the function of a table saw. NOTE 103 Transportable tools combining the function of a mitre saw with the function of a table saw are covered by a future part of IEC 62841-3.

NF C75-132-3-9-2016電動操作工具. 粉塵測量規程. 第3-9部分: 移動式斜切鋸的詳細要求

L'article de la Partie 1 est applicable avec l'exception suivante:

DIN EN 1870-5-2013木工機械安全. 圓盤鋸床. 第5部分:圓盤鋸機床/向上橫切切割鋸床; 德文版本EN 1870-5-2002+A2-2012

This document deals with all significant hazards,hazardous situations and events as listed in Clause 4 which are relevant to circular saw benches/up-cutting cross-cut sawing machines,hereinafter referred to as "machines",designed to cut solid wood,chipboard,fibreboard,plywood and also these materials if (where) they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

DIN EN 1870-16-2013木工機械安全. 圓盤鋸床. 第16部分:V切割用雙斜角鋸床; 德文版本EN 1870-16-2012

This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double mitre sawing machines for V-cutting with a maximum cutting capacity (width and height) of < =200 mm,fitted or not with pneumatic systems,hereinafter referred to as the machine,designed to cut solid wood, chipboard,fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings,when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

DS/EN 61029-2-11-2013移動式電動工具的安全性 - 第2-11部分:組合斜切鋸和臺鋸的特殊要求

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

DS/EN 61029-2-11/A11-2013移動式電動工具的安全性 - 第2-11部分:組合斜切鋸和臺鋸的特殊要求

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

JIS C9029-2-9-2006移動式電動工具的安全.第2-9部分:斜切鋸的特殊要求

この規格の適用範囲は，JIS C 9029-1の1.によるほか，次による。