歡迎訪問中科光析科學技術研究所官網!

免費咨詢熱線
400-640-9567|
光催化自清潔材料檢測項目報價???解決方案???檢測周期???樣品要求? |
點 擊 解 答??![]() |
本標準規定了光催化抗菌材料及制品的抗菌性能術語和定義、抗菌性能的評定、試驗方法和試驗報告。本標準適用于在光照激發下產生抗菌性能的光催化抗菌材料及制品,要求試驗樣品表面平整、與覆蓋膜接觸良好,其材質可以為玻璃、陶瓷、塑料、涂層、織物等。
本標準規定了光催化自清潔材料性能測試方法的術語和定義、安全提示、一般規定、原理、試劑、設備、實驗環境、樣品制備、分析步驟、結果計算、試驗報告。本標準適用于可制備成平面狀的自清潔材料。本標準不適用于黑暗環境中使用及可見光應答型的光催化自清潔材料,及水可以浸潤的透水性材料。
本標準規定了外墻光催化自潔涂覆材料的術語和定義、分類和標記、要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于施涂于外墻涂料表面在光催化作用下具有親水性自潔功能的涂覆材料。
本標準規定了光催化材料性能測試對紫外光光源的要求。本標準適用于采用主波長為365 nm的單端、雙端或自鎮流的紫外光光源(不包括LED紫外光光源)。
本標準規定了建筑外表面用自清潔涂料產品的術語和定義、要求、試驗方法、檢驗規則、標志、包裝和貯存等。本標準適用于通過利用親水、疏水、微粉化、光催化等機理改變涂層的表面特性,在雨水、陽光等自然因素的作用下,無需人工擦洗,就能將涂層表面灰塵、油污等污染物去除的一類功能性涂料,涂料類型包括水性、溶劑型以及其他適用的類型。該涂料主要用于建筑物外表面的裝飾和保護。橋梁、貯罐等表面用自清潔涂料也可參考本標準。
本文件描述了一種用于含有或表面附著光催化劑的材料的空氣凈化性能檢測方法,所涉及光催化劑通常是半導體金屬氧化物,如二氧化鈦(TiO<下標2>)或其他陶瓷材料。該測試方法將試樣置于紫外光(UV-A)照射下,持續暴露于模擬污染空氣中進行。本文件適用于不同類型和用途的板材,如薄板、木板等建筑材料。本文件也適用于結構化的過濾材料,如蜂窩過濾板、針織布或無紡布。同時適用于復合陶瓷微晶的塑料、紙質材料等。本文件不適用于粉狀或顆粒狀光催化材料。本試驗方法通常適用于光催化材料的空氣凈化檢測,不適用于光催化材料的其他性質測定,如水中污染物降解、自清潔、防霧或抗菌等。本方法僅涉及甲苯的去除。
本文件描述了含有光催化劑或表面有光催化劑或光催化材料涂膜表面的抗病毒活性的測試方法,本方法通過計數經紫外光照之后的Q-β噬菌體的減少來確定其抗病毒活性。本文件適用于建材中使用的不同種類的半導體光催化材料,其基本形制包括片狀、塊狀或平板狀等,但不包括粉末、顆粒或多孔光催化材料。本文件適用于具有抗病毒性能的光催化材料的檢測,不適用于抗細菌、抗真菌、水中污染物降解、自清潔、防霧和空氣凈化性能的檢測。本文件中的量值表達采用單位制(SI)單位。
本標準規定了建筑陶瓷自清潔性能測試的術語和定義、原理、光催化活性的測定、水接觸角的測定以及試驗結果報告。本標準主要適用于附有光催化技術的建筑陶瓷材料及制品,對其自清潔性能的表征。本標準不適用于黑暗環境中使用的光催化及可見光應答型的光催化建筑陶瓷自清潔材料。
This International Standard deals with fine ceramics.nThis International Standard specifies a test method for thendetermination of the self-cleaning performance of materials thatncontain a photocatalyst or have photocatalytic films on thensurface, and which are usually made from semiconducting metalnoxides such as titanium dioxide.nThis method is used to measure the water contact angle undernillumination with ultraviolet light, which is one of the indicesninfluencing the self-cleaning performance of photocatalyticnmaterials.nThis International Standard does not include water-permeablensubstrates, rough surfaces which do not have exposed waterndroplets, highly hydrophobic, powder or granular materials, ornvisible light-sensitive photocatalysts.
This Standard deals with fine ceramics. This Standard specifies a test method for the determination of the self-cleaning performance of materials that contain a photocatalyst or have photocatalytic films on the surface, and which are usually made from semiconducting metal oxides such as titanium dioxide.
This European Standard defines a test method to establish the self-cleaning performances for coatings on glass which utilize sun, rain or a combination of sun and rain to enhance the cleanliness of the glass. The European Standard applies to class A coated glass as defined in EN 1096-1 and EN 1096-2 for use in outdoor building applications. The test is designed to be applicable for coatings on glass which use hydrophilic or photocatalytic active functionalities to enhance the cleanliness of the glass. The test procedure does not specifically address the durability of the coating's self-cleaning functionality.
This European standard specifies a test method for the evaluation of the photocatalytic self cleaning performance of materials showing photocatalytic activity, usually based on semiconducting metal oxides such as titanium dioxide, by the measure under solid/solid conditions of the de-colourisation ability of a test sample under illumination with ultraviolet light (UV-A), previously coloured by spreading on it a dye solution and dried This European standard is intended for use with opaque and rough surfaces of different kinds, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This European standard also applies to fabric, plastic or composites containing photocatalytic materials that are not soluble in acetone. This European standard does not apply to photocatalytic glass, granular materials (unless they are deposited in compact films or layers over flat solid surface) and flat non porous materials. The method evaluates only the self cleaning ability of the material under ultraviolet light irradiation. It cannot be applicable to evaluate other performance attributes of photocatalytic materials, i.e., decomposition of water contaminants in liquid or gas phases contacting the material, and antifogging and antibacterial actions.
This part of this European Standard describes the methodologies to be used in a laboratory air tight chamber to test prototype or commercial air cleaner systems with a maximum flow rate of 1,000 m3/h used for the indoor air remediation. It applies to the treatment of atmospheres that are representative of the air inside buildings and workplaces. This protocol applies solely to photocatalytic systems alone or to combined systems that include a photocatalytic function. This photocatalytic function is demonstrated by verifying the mineralisation of model VOCs to form CO2.
? ??? ?? ???? ??? ? ??? ?? ??? ??? ??? ?? ?, ? ???
前沿科學
微信公眾號
中析研究所
抖音
中析研究所
微信公眾號
中析研究所
快手
中析研究所
微視頻
中析研究所
小紅書