抗菌產品檢測

抗菌產品檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 20944.1-2007紡織品 抗菌性能的評價 第1部分:瓊脂平皿擴散法

GB/T 20944的本部分規定了采用瓊脂平皿擴散法測定紡織品抗菌性能的定性試驗和評價方法。 本部分適用于機織物、針織物、非織造織物和其他平面織物。纖維、紗線等可參照執行。 本部分不適用于抗菌劑在試驗瓊脂上完全不擴散的試樣，也不適用于抗菌劑與瓊脂起反應的試樣。 本部分不涉及抗菌產品安全性的評價。

GB/T 20944.2-2007紡織品 抗菌性能的評價 第2部分:吸收法

GB/T 20944的本部分規定了采用吸收法測定紡織品抗菌性能的定量試驗和評價方法。 本部分適用于羽絨、纖維、紗線、織物和制品等各類紡織產品。 本部分不涉及抗菌產品安全性的評價。

GB/T 20944.3-2008紡織品.抗菌性能的評價.第3部分:振蕩法

GB／T 20944的本部分規定了采用振蕩法測定紡織品抗菌性能的定量試驗和評價方法。 本部分適用于羽絨、纖維、紗線、織物，以及特殊形狀的制品等各類紡織產品，尤其適用于非溶出型抗菌紡織產品。 本部分不涉及抗菌產品安全性的評價。

GB/T 22925-2009納米技術處理服裝

本標準規定了納米技術處理服裝產品的術語和定義、要求、檢測方法、檢驗分類規則，以及標志、包裝、運輸和貯存等技術特征。本標準適用于經納米技術處理的，以紡織機織物為主要面料生產的功能性服裝。該服裝或其特定部位在生產加工過程中因使用了納米技術而具有了防水、防油、易去污、抗菌、防紫外線等一種或幾種功能。本標準不適用于嬰幼兒服裝。

GB 50687-2011食品工業潔凈用房建筑技術規范

本規范適用食品加工和生產的新建、改建和擴建廠房中潔凈用房的設計、施工、工程檢測和工程驗收。

LY/T 1926-2020人造板與木(竹)制品抗菌性能檢測與分級

本文件規定了人造板與木(竹)制品的抗菌性能檢測方法和分級的術語和定義、抗菌性能檢測方法和分級。本文件適用于抗菌處理的人造板和各種抗菌木(竹)制品的抗菌性能檢測和分級。本文件不涉及抗菌產品的安全性評價。

SN/T 2558.4-2012進出口功能性紡織品檢驗方法.第4部分：抗菌性能.平板瓊脂法

SN/T 2558的本部分規定了采用瓊脂平皿擴散法測定進出口紡織品抗菌性能的定性分析測試方法。本部分適用于機織物、針織物、非織造織物和其他平面織物。羽絨、纖維、紗線等可參照執行。本部分適用于溶出性、非溶出型抗菌紡織品。本部分不適用于抗菌劑在試驗瓊脂上完全不擴散的試樣，也不適用于抗菌劑與瓊脂起反應的試樣。本部分不涉及抗菌產品安全性的評價。

SN/T 2558.9-2015進出口功能性紡織品檢驗方法 第9部分:抗菌性能 阻抗法

SN/T 2558的本部分規定了采用阻抗法測定紡織品抗菌性能的定量試驗和評價方法。本部分適用于羽絨、纖維、紗線、織物及其制品等各類紡織產品。本部分不涉及抗菌產品安全性的評價。

ASTM E2897-2012使用體外豬皮膚評估手部衛生局部抗菌產品效果的標準指南

5.1x00a0;The guide may be used to demonstrate the effectiveness of topical antimicrobial products using pigskin as a surrogate for human skin and the cup scrub technique for sampling. 5.2x00a0;The techniques described can be used to simulate Test Method E1174 and will use the pigskin substrate to overcome limitations posed by exposure of human subjects to potentially pathogenic microorganisms, while offering the benefit of applicability to a wide variety of hand-washing conditions that cannot be simulated in test tubes. 5.3x00a0;Use of the pigskin surrogate offers less expensive and higher throughput screening. 1.1x00a0;This guide is designed to demonstrate the effectiveness of hand hygiene topical antimicrobial products using pigskin as a surrogate model. 1.2x00a0;Knowledge of microbiological techniques is required for these procedures. 1.3x00a0;This standard guide can be used to evaluate topical antimicrobial handwash or handrub formulations. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM E2897-2012(2017)利用體外豬皮評價手部衛生局部抗菌產品有效性的標準指南

5.1x00a0;The guide may be used to demonstrate the effectiveness of topical antimicrobial products using pigskin as a surrogate for human skin and the cup scrub technique for sampling. 5.2x00a0;The techniques described can be used to simulate Test Method E1174 and will use the pigskin substrate to overcome limitations posed by exposure of human subjects to potentially pathogenic microorganisms, while offering the benefit of applicability to a wide variety of hand-washing conditions that cannot be simulated in test tubes. 5.3x00a0;Use of the pigskin surrogate offers less expensive and higher throughput screening. 1.1x00a0;This guide is designed to demonstrate the effectiveness of hand hygiene topical antimicrobial products using pigskin as a surrogate model. 1.2x00a0;Knowledge of microbiological techniques is required for these procedures. 1.3x00a0;This standard guide can be used to evaluate topical antimicrobial handwash or handrub formulations. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6x00a0;This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E2897-2022使用離體豬皮膚評估手部衛生局部抗菌產品有效性的標準指南

1.1?This guide is designed to demonstrate the effectiveness of hand hygiene topical antimicrobial products using pigskin as a surrogate model. 1.2?Knowledge of microbiological techniques is required for these procedures. 1.3?This standard guide can be used to evaluate topical antimicrobial handwash or handrub formulations. 1.4?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

DIN EN ISO 16187-2013鞋和鞋類組件.評估抗菌活性的試驗方法(ISO 16187-2013).德文版本EN ISO 16187-2013

This International Standard specifies quantitative test methods to determine the antibacterial activity of footwear.This International Standard is applicable to all footwear products regardless of the type of antibacterial agent used(organic, inorganic, natural or man-made) or the method of application (built-in, after-treatment or grafting).The user can select the most suitable of the following methods on determination of antibacterial activity:a) Qualitative method (halo test) This is the testing method to evaluation the antibacterial activity of footwear products treated with antibacterial finish by the existence of halos, and this is applicable when antibacterial finishing chemicals can easily diffuse into plate agar culture medium.b) Quantitative method (Absorption test) This is the testing method to evaluation the antibacterial activity of footwear products treated with antibacterial finish by making use of a bacteriostatic activity value or a bactericidal activity value.