進出口皮革及皮革制品檢測

進出口皮革及皮革制品檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 6565-2015職業分類與代碼

本標準規定了我國職業的分類結構、類別、代碼及說明。本標準適用于按職業分類的各種普查、調查統計及行政管理和國內外信息交流等。

GB 7691-2003涂裝作業安全規程 安全管理通則

本標準規定了涂裝(涂覆、涂布，下同)作業使用的涂料及有關化學品、涂裝工藝、涂裝設備器械、作業場所和涂裝施工的安全管理基本原則。 本標準適用于使用涂料及有關化學品(包括有機溶劑)在金屬或非金屬表面的涂裝作業，包括露天涂裝作業，建筑物、構筑物內外涂飾作業，塑料制品、紡織品、皮革制品、漆布等非金屬的涂覆、涂布、印染、上光等有機溶劑作業。也適用于涂料及有關化學品、涂裝工藝、涂裝設備器械、涂裝廠房(涂裝作業場所)的科研、設計、生產、制造、運輸、施工安裝、經營(包括經營活動的技術交流、商品展覽)與管理。 其他有機溶劑作業亦可參照執行本標準。

GB/T 35528-2017低溫液化氣體安全指南

本標準規定了常用低溫液化氣體的(裝置)設計、充裝、儲存、運輸和使用等過程中與安全密切相關的基本要求。本標準適用于以低溫液體形式運輸和儲存的常用工業氣體，即氫、氧、氮、氦、氖、氬、氪和甲烷的低溫液化產品。本標準不適用于各種常用工業氣體及其液化產品的生產過程。

GB 50084-2017自動噴水滅火系統設計規范

本規范適用于新建、擴建、改建的民用與工業建筑中自動噴水滅火系統的設計。本規范不適用于火藥、炸藥、彈藥、火工品工廠、核電站及飛機庫等特殊功能建筑中自動噴水滅火系統的設計。

SN/T 0006-2015檢驗檢疫紡織標準編制指南

本標準規定了進出口紡織品檢驗檢疫行業標準的結構和編寫的一般原則。本標準適用于進出口紡織品檢驗檢疫行業標準編寫指導。

SN/T 0007.1-2016進出口輕工產品檢驗標準編寫的基本規定 第1部分:檢驗規程

SN/T 0007的本部分規定了進出口輕工產品檢驗規程(以下簡稱檢驗規程)編寫的基本要求、結構和編寫順序。本部分適用于進出口輕工產品檢驗規程的編寫。

SN/T 0193.1-2015出口皮革及皮革制品中五氯酚殘留量檢測方法 第1部分:液相色譜-質譜/質譜法

SN/T 0193的本部分規定了出口鞣質豬皮、牛皮、羊皮及其制品中五氯酚殘留量的液相色譜-質譜/質譜測定方法。本部分適用于鞣質豬皮、牛皮、羊皮中五氯酚殘留量定性確證和定量測定。

SN/T 1045.1-2010進出口染色紡織品和皮革制品中禁用偶氮染料的測定.第1部分:液相色譜法

SN/T 1045的本部分規定了染色紡織品和皮革制品中23種禁用芳香胺(見附錄A)含量的液相色譜檢測方法。本部分適用于進出口染色紡織品(包括棉、麻、絲、毛、化纖等)和染色皮革制品中23種禁用芳香胺的檢測。

SN/T 1045.2-2010進出口染色紡織品和皮革制品中禁用偶氮染料的測定.第2部分:氣相色譜/質譜法

SN/T 1045的本部分規定了染色紡織品和皮革制品中23種禁用芳香胺(見附錄A)含量的氣象色譜/質譜檢測方法。本部分適用于進出口染色紡織品(包括棉、麻、絲、毛、化纖等)和染色皮革制品中23種禁用芳香胺的檢測。

SN/T 1045.3-2010進出口染色紡織品和皮革制品中禁用偶氮染料的測定.第3部分:氣相色譜法

SN/T 1045的本部分規定了染色紡織品和皮革制品中23種禁用芳香胺(見附錄A)含量的氣相色譜檢測方法。本部分適用于進出口染色紡織品(包括棉、麻、絲、毛、化纖等)和染色皮革制品中23種禁用芳香胺的檢測。

SN/T 1649-2012進出口紡織品安全項目檢驗規范

本標準規定了進出口紡織品的基本安全項目的技術要求、試驗方法和檢驗規則，并給出了其他安全項目的限定指標及主要內容等。本標準適用于進出口紡織品安全項目的檢驗。

SN/T 1654-2005進出口皮革及皮革制品中2,3,5,6-四氯苯酚殘留量的測定 乙酰化氣相色譜法

本標準規定了皮革、皮革制品中2，3，5，6-四氯苯酚及其鹽類殘留量測定方法。 本標準適用于各種皮革及其制品中2，3，5，6-四氯苯酚及其鹽類殘留量的測定。

SN/T 1929-2007進出口紡織品安全項目檢驗術語

本標準規定了進出口紡織品安全項目檢驗的通用術語。

SN/T 2583-2010進出口紡織品及皮革中烷基酚類化合物殘留量的測定 氣相色譜-質譜法

本標準規定了紡織品及皮革制品中壬基苯酚、辛基苯酚和十二烷基苯酚殘留量測定方法。本標準適用于各種紡織品及皮革制品中壬基苯酚、辛基苯酚和十二烷基苯酚殘留量的測定。

SN/T 2791.1-2011進出口玩具檢驗檢疫通用技術要求.第1部分:玩具衛生

SN/T 2791的本部分規定了進出口玩具及玩具材料的衛生要求及檢驗方法。本部分適用于下列玩具及玩具材料的檢驗：--軟性造型黏土；--玩具中含有的液體、膏體、油灰、凝膠和粉末；--玩具填充物；--玩具上使用的動植物天然材料(如：羽毛、皮革制品等)；--玩具化妝品；--供3歲及以下兒童使用的玩具；--與食品一起提供的玩具。

EN 12044-2005鞋,皮革和仿皮革產品制造機械.切割和打孔機.安全要求.包含修改件A1-2009

This European Standard specifies safety requirements for the design and operation of the machines defined in 1.2. It takes account of intended use, foreseeable misuse and component and system failure.This European Standard applies for cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components.This European Standard applies to the following cutting and punching machines: swing arm cutting presses with manual or powered swing arm; manual and automatic travelling head cutting presses with powered travelling head; manual and automatic beam cutting presses; punching and perforating presses; C-frame cutting presses.This European Standard is not applicable to: mechanical presses; presses intended for working cold metal; fastening, riveting, stitching, stapling, bending or folding machines; guillotines, shears and similar machines; shoe and leather presses as described in EN 12203.This European Standard deals with all significant hazards, hazardous situations and events relevant to the footwear, leather and imitation leather goods manufacturing machinery defined in 1.2, when it is used as intended and under the conditions foreseen by the manufacturer (see Clause 4) and is intended for operation in applications by trained persons.This European Standard deals with material feeding and handling devices, when attached to the machine.This European Standard is not applicable to machines which are manufactured before the date of publication of this European Standard by CEN.

EN 13457-2004鞋靴,皮革和仿皮貨物的生產機械.片皮機,剖革機,裁切機,擦膠機和干膠機.安全要求.包含修改件A1-2010

This document applies to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines used inThe manufacture of footwear, leather and imitation leather goods and other related components.This document does not apply to:trimming machines with rotary milling tool forThe purpose of trimming edges of material, see EN 930; splitting and band knife machines used in tanneries, see EN 13112; portable machines.This document specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use, foreseeable misuse, component and system failure.This document deals with significant hazards relevant toThe footwear, leather and imitation leather goods manufacturing industries. (For a list of hazards see Clause 4.)The document does not deal with precise technical measures for reducingThe risks of fumes and dusts detrimental to health.The use of machines falling withinThe scope of this document for purposes other than those specified in 1.1, may give rise to hazards not considered during its preparation.This document also applies to equipment for material handling and operations which are an integral part of the machine.This document assumesThe machines are operated by adequately trained persons are used with adequate workplace lighting conformingThe local regulations or to EN 12464-1.This document is not applicable to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines which are manufactured beforeThe date of its publication as EN.

EN ISO 13855-2010機械安全.保障措施相對于人體部位接近速度的定位［代替:CEN EN 999］

This International Standard establishes the positioning of safeguards with respect to the approach speeds of parts of the human body

NF G83-102-2008制鞋機械.靴模機械.安全要求

La présente Norme européenne s'applique aux machines de moulage pour chaussures utilisées dans l'industrie de la chaussure pour la production de chaussures et d'articles chaussants.Ces machines sont :- les machines de moulage direct des semelles ;- les machines de moulage d'éléments de chaussures et de semelles (voir Figures 4 à 10) ;- les machines pour moulage complet de chaussures et bottes.La présente Norme européenne s'applique également aux machines mentionnées lorsqu'elles sont utilisées pour des produits autres que les chaussures et articles chaussants, dans la mesure où ces produits ne nécessitent pas d'autre modification qu'un moule différent.La présente Norme européenne spécifie les prescriptions de sécurité relatives à la construction, au transport, à l'installation, à la mise au point, au réglage, à l'apprentissage ou au changement de procédé de fabrication, au fonctionnement, au nettoyage, à la maintenance, à la mise hors service, au démontage et, pour autant que cela concerne la sécurité, à la mise au rebut des machines mentionnées en 1.1.Elle traite de tous les phénomènes dangereux significatifs, situations et événements dangereux applicables aux machines de moulage pour chaussures, lorsqu'elles sont utilisées selon l'usage prévu et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.

DIN EN 1845-2008制鞋機械.鞋模機械.安全要求

1.1 This European Standard applies to footwear moulding machines which are intended for use in the shoeindustry for the production of footwear and footwear components.These machines are:-- direct-on sole moulding machines (see Figures 1, 2 and 3);-- unit sole and footwear component moulding machines (see Figures 4 to 10);-- full shoe and boot moulding machines (see Figure 11).This European Standard applies also to the mentioned machines when used for other products than footwearand footwear components, as far as these products require no other changes than a different mould.1.2 This European Standard specifies safety requirements for construction, transport, installation,adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning,dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1.It deals with all significant hazards, hazardous situations and events relevant to footwear moulding machines,when they are used as intended and under conditions of misuse which are reasonably foreseeable by themanufacturer (see Clause 4).1.3 The following machines are excluded from the scope of this European Standard unless used for direct-on sole moulding or reaction moulding:-- moulding machines with static injection units and static mould stations (clamping units);-- moulding machines with static metering and mixing units and mobile stations with linear configuration (mould carriers).1.4 The European Standard does not deal with hazards created by the mixing and metering unit.NOTE For metering and mixing units, see EN 1612-1.The use of machines within the scope of this European Standard in industries other than those specified in 1.1may give rise to hazards not considered during its preparation.NOTE For this application see also EN 201 and prEN 1612-2.1.5 This European Standard also applies to the following additional equipment for material handling andoperation which are an integral part of the machine:-- spraying devices, injection units, casting units, nozzle cleaners, sprue pullers, mould front edge cleaners, activating devices, robots and equipment for preparatory and subsequent treatment (see Figure M.1).1.6 This European Standard assumes the machines:-- are operated by adequately trained persons;-- are used with adequate workplace lighting (see EN 12464-1).1.7 This document is not applicable to footwear moulding machines which are manufactured before thedate of publication of this European Standard by CEN.