云母氧化鐵顏料檢測

云母氧化鐵顏料檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 1863-2008氧化鐵顏料

本標準規定了氧化鐵顏料的分類、要求、命名、取樣、試驗方法、檢驗規則及標志、包裝、運輸和貯存。這些顏料以下列顏色索引號標識：紅101和紅102、黃42和黃43、棕6和棕7以及黑11，也包括快速分散顏料。未包括云母氧化鐵顏料、透明氧化鐵顏料、粒狀氧化鐵灰和除顏色索引號為黑11的顏料外的磁性氧化鐵顏料。本標準適用于一般用途的氧化鐵顏料，主要應用于涂料、建筑、造紙、橡膠和塑料等工業領域。

GB/T 28699-2012鋼結構防護涂裝通用技術條件

本標準規定了鋼結構防護涂裝的涂層體系技術要求、檢驗方法、檢測及驗收規則及典型的涂層體系，規定了涂裝作業的安全、衛生和環境保護的要求。本標準適用于鋼結構及鋼結構附屬件的防護涂裝。

GB/T 31415-2015色漆和清漆 海上建筑及相關結構用防護涂料體系性能要求

本標準規定了海上建筑及相關結構(即那些暴露于海洋大氣和浸于咸水或微咸水中的結構)所用防護涂料體系的性能要求。這些結構暴露于ISO 12944-2定義的C5-M腐蝕性等級和Im2浸漬等級的環境中,ISO 12944-2:1998中4.3以及附錄B對這些腐蝕環境中的特殊應力進行了說明。本標準也適用于其他采用符合本標準的涂料或防護涂料體系的建筑結構。本標準著重于高耐久性涂料體系,以達到小化維護費用的目的,并因此減少安全性支出和環境影響。本標準在ISO 12944-6中用于對C5-M腐蝕性等級的要求基礎之上指定了額外的測試要求。因此,滿足ISO 12944-6中C5-M等級高耐久性要求的涂料體系未必滿足本標準的要求,并可能需要做更進一步的測試。這些涂料體系適用的溫度范圍一般在-20 ℃~80 ℃,而性能試驗也是為了證實涂料體系在該溫度范圍的適應性。在此溫度范圍之外使用涂料體系應得到終用戶的認可。這些認可應包括在合適的溫度下進行的測試。用于浸漬條件(Im2)下的涂料體系針對的是環境溫度高達到50 ℃的情況。對于更高的環境溫度,則需要特定的評價和性能說明。所選擇考察的性能要求應考慮與陰極保護的設計參數相結合。本標準包括:——確定防護涂料體系不同組分成分的測試方法;——評定防護涂料體系預期耐久性的實驗室性能測試方法;——評價性能測試結果的準則。

HG/T 3006-2012云母氧化鐵顏料

本標準規定了云母氧化鐵顏料的分類、要求、試驗方法、檢驗規則及標志、包裝、運輸和貯存等內容。本標準適用于合成的和天然的云母氧化鐵顏料。該產品呈干粉狀，主要用于鋼構件防護涂料。本標準不包括薄片狀粒子含量低于30%的顏料。

HG/T 4340-2012環氧云鐵中間漆

本標準規定了環氧云鐵中間漆產品的要求、試驗方法、檢驗規則、標志、包裝和貯存等內容。 本標準適用于由環氧樹脂為主要成膜物質，加入云母氧化鐵顏料等制成的雙組分涂料，主要用作防腐涂裝體系的中間層。

ISO 10601-2007涂料用云母氧化鐵顏料.規范和試驗方法

This International Standard specifies the requirements and corresponding test methods for manufactured andnatural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork.In accordance with current practice, the general requirements for micaceous iron oxide pigments have beensub-divided to givea) those requirements that are essential (see Table 2)andb) those requirements that are conditional upon prior agreement between the interested parties (seeTable 3).In certain instances, reference may be made to an agreed reference pigment.

EN ISO 1248-2008氧化鐵顏料.規范和試驗方法

This International Standard specifies the requirements and the corresponding methods of test for all manufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments are identified by Colour Index Nos.1) red 101 and 102, yellow 42 and 43, brown 6 and 7 and black 11, and includes “rapid-dispersion pigments”.This International Standard does not cover micaceous iron oxide pigments (see Note 1), transparent iron oxide pigments, granular grey iron oxide (see Note 2) or magnetic iron oxide pigments other than those of Colour Index Pigment black 11.NOTE 1 The requirements and the corresponding methods of test for micaceous iron o

GSO ISO 10601-2014涂料用云母氧化鐵顏料規范和試驗方法

This International Standard specifies the requirements and corresponding test methods for manufactured and natural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork. In accordance with current practice, the general requirements for micaceous iron oxide pigments have been sub-divided to give a) those requirements that are essential (see Table 2) and b) those requirements that are conditional upon prior agreement between the interested parties (see Table 3). In certain instances, reference may be made to an agreed reference pigment.

NF T31-002-2008氧化鐵顏料.試驗方法和規范

La présente Norme internationale spécifie les exigences et les méthodes d'essai correspondantes pour tous les pigments à base d'oxydes de fer artificiels et naturels, sous forme sèche, destinés à un usage général. Ces pigments sont identifiés par les numéros suivants du Colour Index : Red 101 et 102, Yellow 42 et 43, Brown 6 et 7 et Black 11, et comprennent les "pigments à dispersion rapide".La présente Norme internationale ne couvre pas les pigments à base d'oxydes de fer micacés , les pigments à base d'oxydes de fer transparents, les pigments à base d'oxydes de fer gris granuleux ou les pigments à base d'oxydes de fer magnétiques autres que ceux correspondant au Pigment Black 11 du Colour Index.

TS ISO 10601-2015涂料用云母氧化鐵顏料. 規格和試驗方法

This standard specifies the requirements and corresponding test methods for manufactured and natural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork.

DIN EN ISO 10601-2008涂料用云母氧化鐵顏料.規范和試驗方法

This International Standard specifies the requirements and corresponding test methods for manufactured andnatural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork.In accordance with current practice, the general requirements for micaceous iron oxide pigments have beensub-divided to givea) those requirements that are essential (see Table 2)andb) those requirements that are conditional upon prior agreement between the interested parties (see Table 3).In certain instances, reference may be made to an agreed reference pigment.

BS EN ISO 1248-2008氧化鐵顏料.規范和試驗方法

This International Standard specifies the requirements and the corresponding methods of test for allmanufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments areidentified by Colour Index Nos.1) red 101 and 102, yellow 42 and 43, brown 6 and 7 and black 11, andincludes “rapid-dispersion pigments”.This International Standard does not cover micaceous iron oxide pigments (see Note 1), transparent ironoxide pigments, granular grey iron oxide (see Note 2) or magnetic iron oxide pigments other than those ofColour Index Pigment black 11.

UNI EN ISO 10601-2008涂料用云母氧化鐵顏料.規范和試驗方法

La presente norma è la versione ufficiale in lingua inglese della norma europea EN ISO 10601 (edizione maggio 2008). La norma specifica i requisiti e i relativi metodi d'analisi per i pigmenti in polvere a base di ossido di ferro micaceo (MIO) sia prodotti industrialmente sia naturali, principalmente utilizzati nel settore della protezione di manufatti in acciaio.

AS 2855-2004 (R2016)涂料及相關材料. 云母氧化鐵顏料

RECONFIRMATION NOTICEnTechnical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.nCertain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.nApproved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 30 October 2015.nThe following are represented on Technical Committee CH-003:nAustralasian Corrosion AssociationnAustralian Institute of BuildingnAustralian Paint Manufacturersu0092 FederationnAustralian Wall and Ceiling AssociationnCSIROnInstitution of Professional Engineers New ZealandnMaster Painters AustralianMaster Painters New Zealand AssociationnNational Painting and Decorating InstitutenSafe Work AustralianSurface Coatings Association Australia