家用電燈檢測

家用電燈檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

SN/T 3085-2012進口舊電子電氣產品檢驗 技術要求.通則

本標準規定了進口舊電子電氣產品的電器電氣安全、機械安全、電磁兼容、環境保護、能源效率等的檢驗技術要求的通則。本標準適用于以下用于國內銷售使用的舊電子電氣產品：——大型家用電器產品；——小型家用電器產品；——信息和通訊產品：——音視頻產品；——照明產品；——電氣和電子工具（大型靜態工業工具除外）；——玩具、休閑和運動產品；——醫用產品（所有被植入和被感染的產品除外）；——監測和控制設備；——自動售貨機。產品示例見附錄A。

UL 826-2007家用電燈

These requirements cover electrically operated household clocks having an input rating of not more than 30 watts and 250 volts to be used in ordinary indoor locations in accordance with the National Electrical Code, NFPA 70. These requirements do not cover clocks intended primarily for industrial or commercial installations, clocks that form part of a master clock system, outdoor clocks, time stamps, job card recorders, timers, and similar time-indicating and recording appliances, nor do they cover illuminated clocks intended for use as portable electric lamps or for other illuminating purposes. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

JS 2092-2014家用電燈的能量效率標簽

This implementing Technical Regulation shall apply to household electric lamps supplied directly from the mains (filament and integral compact fluorescent lamps), and to household fluorescent lamps (including linear, and non-integral compact fluorescent lamps), even when marketed for non-household use. .

JS 50285-2013家用電燈的能量效率.測量方法

This standard specifies the test conditions and method of measurement of luminous flux, lamp wattage and lamp life as given on a label on the lamp packaging, together with a procedure for verification of the declared values. Only those parameters that are specific to the above mentioned Directive are included in this standard. All other parameters are included in the relevant lamp performance .

TS EN 50285-2002家用電燈的能量效率. 測量方法

This standard specifies the test comditions and measurement of luminous flux, lamp wattage and lamplife as given on a label on the lamp packaginig, together with a procedure for verification of the declared values

DIN EN 60300-3-4-2008可靠性管理.第3-4部分:應用指南.可靠性要求的規范指南

This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications, together with specifications of procedures and criteria for verification and validation: - advice on specifying quantitative and qualitative reliability, maintainability, availability and maintenance support requirements; - advice to purchasers of a system on how to ensure that the specified requirements will be fulfilled by suppliers; - advice to suppliers to help them to meet purchaser requirements.

DS/EN 50285-1999家用電燈的能效 - 測量方法

This standard has been produced under Standardisation Mandate M/202 in response to the European Commission Directive implementing Council Directive 92/75/EEC. This standard specifies the test conditions and method of measurement of luminous flux, lamp wattage and lamp life as given on a label on the lamp packaging together with a procedure for verification of the declared values. Only those parameters that are specific to the above mentioned Directive are included in this standard, all other parameters are defined in the relevant lamp performance standards.

BS EN 50285-1999家用電燈的能量效率.測量方法

This European Standard has been produced under Standardization Mandate M/202 in response to the European Commission Directive implementing Council Directive 92/75/EEC with regard to energy labelling of household lamps. A method of classification of lamps according to energy efficiency is given in the Directive and is not a part of this standard.nThis standard specifies the test conditions and method of measurement of luminous flux, lamp wattage and lamp life as given on a label on the lamp packaging, together with a procedure for verification of the declared values. Only those parameters that are specific to the above mentioned Directive are included in this standard. All other parameters are included in the relevant lamp performance standards.nLamps covered by this standard are:n—mains voltage tungsten filament lamps;n—mains voltage tungsten halogen lamps;n—self-ballasted lamps;n—double-capped fluorescent lamps;n—single-capped fluorescent lamps.

BS EN 60300-3-4-2008可靠性管理.應用指南.可靠性要求的規范指南

This part of IEC 60300 gives guidance on specifying the required dependability characteristicsin specifications, together with specifications of procedures and criteria for verification andvalidation.The guidance provided includes the following:– advice on specifying quantitative and qualitative reliability, maintainability, availability andmaintenance support requirements;– advice to purchasers of a system on how to ensure that the specified requirements will befulfilled by suppliers;– advice to suppliers to help them to meet purchaser requirements.Other documents, such as legislation and governmental regulation may also placerequirements on systems and these should be applied in addition to any specificationsderived in accordance with this standard.NOTE 1 Whilst mainly addressing system and equipment level reliability, many of the techniques described in thedifferent parts of IEC 60300 may also be applied to products, items or at the component level. The term system isused throughout this standard.NOTE 2 This standard does not give guidance on the management of dependability programmes or on the variousactivities necessary to fulfil stated availability, reliability, maintainability and maintenance support requirements.For this general guidance, see other standards.NOTE 3 Safety and environment specifications are not directly considered in this guide. However, much of theguidance in this standard could also be applied to safety or environmental specification.NOTE 4 Specifications for the dependability of a service are not considered in this guide. This includes theprovision of a service such as those provided through Public-Private Partnership procurements.